INTRODUCTION TO JOINT MULTI-TDL
NETWORK (MTN OPERATIONS) EXAM
Functional components - Correct Answers -In a JTF structure, what organizations are
considered to be the "warfighting" elements
Which of the following is a responsibility of the JFACC - Correct Answers -Coordinate
the planning and execution of air operations
JDN - Correct Answers -________ is comprised of several digital data networks, each
of which is optimized to enable both improved situational awareness (SA) and
commander's decision cycle
Common Tactical picture (CTP) - Correct Answers -An accurate and complete display
of relevant correlated associated, and fused tactical data, supporting a JTF that
integrates tactical information from the MTN, ground network, intelligence network, and
sensor networks
Tactical Picture (TP) - Correct Answers -A graphical representation of battles,
engagements, and activities to achieve military objectives assigned to tactical units or
task forces
________ rules are designed so that the C2IU with the better positional data, higher
TQ, will report the track with their calculated position. - Correct Answers -Reporting
Responsibility (R2)
_______ exist when the same track number is used by two or more IUs for two or more
different tracks. - Correct Answers -Duplicate track numbers
_______ is a condition of correct relative alignment between local and remote track
positional data. - Correct Answers -Data registration
When two tracks are correlated, they become what is known as a ____________. -
Correct Answers -Common Track
Common operational Picture (COP) - Correct Answers -A distributed data processing
environment for developing a dynamic database of objects, allowing each user to filter
and contribute to this database, according to the user's area of responsibility and
command role
,Joint Data Network Operations Officer (JDNO) - Correct Answers -The _______ plans,
executes, and evaluates the JTF CTP
CJE - Correct Answers -At the functional component level the _____ supports the
integration of the tactical picture into the common tactical picture
JJICO - Correct Answers -Leads the JICC organization, responsible for planning and
execution of the MTA and MTN, and develops the MTA to support the warfighter's
Information Exchange Requirements (IERs) for all functional components
JICC Watch Officer - Correct Answers -coordinates and has resolution authority to
resolve cross-regional MTN issues with the Regional Interface Control Cell, or RICC, or
Sector Interface Control Cells, or SICCs.
Joint Track Data Coordinator - Correct Answers -Supervises the resolution of the
interface anomalies such as dual designations, duplicate tracks, identification conflicts,
and category conflicts, and transmits the change data orders to resolve environment
and identity conflicts
JREAP/BLOS Link Manager - Correct Answers -Coordinates Satellite Access Request
(SAR) submission, Satellite Access Authorization (SAA) for JREAP A and Sat J and
works with the J6 for IP addresses and port Assignments and any firewall issues and
conducts bandwidth analysis
Link 16 Manager - Correct Answers -Coordinate Link 16 initialization process, manage
network role assignments and connectivity between JUs to include activation and
deactivation of relays
Link 11/11B Manager - Correct Answers -Coordinates Link 11 entry and exit
procedures, monitors link performance and track throughput rates, polling sequences
Joint Interface Control Cell - Correct Answers -Task-organized team of MTN
experiences personnel that directly support the JICO enabling successful operations
MTA refers to the physical configuration, functional organization, and operational
procedures that make up the MTN. MTN refers to the MTA and the data flowing through
the MTA systems. - Correct Answers -True
Which of the following statements best describes the purpose of the MTN? - Correct
Answers -To satisfy the warfighters' IERS
Universal Joint Task List (UJTL) - Correct Answers -Serves as a common language and
common reference system to communicate mission requirements.
, Adaptive Planning and Execution (APEX) - Correct Answers -A combination of joint
policies and procedures that addresses unique communications and systems interface
requirements to provide joint commanders and planners with a capability to plan and
conduct joint military operations.
Capabilities and Limitations - Correct Answers -Reflects system capabilities and
provides detail about system quirks or interoperability issues.
Operations Plan (OPLAN) - Correct Answers -A complete and detailed joint plan
containing a full description of the concept of operations all annexes applicable to the
plan, and time-phased force and deployment data (TPFDD).
Operations Order (OPORD) - Correct Answers -A directive issued by a commander to
subordinate commanders for the purpose of effecting the coordinated execution of an
operation.
Which entities have responsibilities for the MTA/MTN: Select all that apply. - Correct
Answers -Commander Joint Task Force (CJTF)
Joint Interface Control Officer (JICO)
Area Air Defense Commander (AADC)
Which of the following set types conveys information that applies to the entire message
and is located at the end of the message? - Correct Answers -Remarks Set (RMKS)
Which of the following special characters indicates the end of a set? - Correct Answers
-//
Which of the statements accurately describes repetition in a USMTF message? Select
all that apply. - Correct Answers --Not all information can be repeated
-Segments are repeatable by definition
______, ______, ______, and _______, are considered the initial sets and occupy the
first set format positions in each message format. - Correct Answers -EXER, OPER,
MSGID, REF
Which field identifies the originator of the reference in this example?
REF/B/GENADMIN/-/613 AIR OPERATIONS CENTER/011600ZAUG2015// - Correct
Answers -Field 4
Which of the following sets identifies the special point of contact information for the
OPTASK LINK? - Correct Answers -POCLINK
Which of the following statements highlights the differences between MTA and MTN?
Select all that apply. - Correct Answers -MTA= Physical connections + Equipment
MTN= MTA + Tactical Data
NETWORK (MTN OPERATIONS) EXAM
Functional components - Correct Answers -In a JTF structure, what organizations are
considered to be the "warfighting" elements
Which of the following is a responsibility of the JFACC - Correct Answers -Coordinate
the planning and execution of air operations
JDN - Correct Answers -________ is comprised of several digital data networks, each
of which is optimized to enable both improved situational awareness (SA) and
commander's decision cycle
Common Tactical picture (CTP) - Correct Answers -An accurate and complete display
of relevant correlated associated, and fused tactical data, supporting a JTF that
integrates tactical information from the MTN, ground network, intelligence network, and
sensor networks
Tactical Picture (TP) - Correct Answers -A graphical representation of battles,
engagements, and activities to achieve military objectives assigned to tactical units or
task forces
________ rules are designed so that the C2IU with the better positional data, higher
TQ, will report the track with their calculated position. - Correct Answers -Reporting
Responsibility (R2)
_______ exist when the same track number is used by two or more IUs for two or more
different tracks. - Correct Answers -Duplicate track numbers
_______ is a condition of correct relative alignment between local and remote track
positional data. - Correct Answers -Data registration
When two tracks are correlated, they become what is known as a ____________. -
Correct Answers -Common Track
Common operational Picture (COP) - Correct Answers -A distributed data processing
environment for developing a dynamic database of objects, allowing each user to filter
and contribute to this database, according to the user's area of responsibility and
command role
,Joint Data Network Operations Officer (JDNO) - Correct Answers -The _______ plans,
executes, and evaluates the JTF CTP
CJE - Correct Answers -At the functional component level the _____ supports the
integration of the tactical picture into the common tactical picture
JJICO - Correct Answers -Leads the JICC organization, responsible for planning and
execution of the MTA and MTN, and develops the MTA to support the warfighter's
Information Exchange Requirements (IERs) for all functional components
JICC Watch Officer - Correct Answers -coordinates and has resolution authority to
resolve cross-regional MTN issues with the Regional Interface Control Cell, or RICC, or
Sector Interface Control Cells, or SICCs.
Joint Track Data Coordinator - Correct Answers -Supervises the resolution of the
interface anomalies such as dual designations, duplicate tracks, identification conflicts,
and category conflicts, and transmits the change data orders to resolve environment
and identity conflicts
JREAP/BLOS Link Manager - Correct Answers -Coordinates Satellite Access Request
(SAR) submission, Satellite Access Authorization (SAA) for JREAP A and Sat J and
works with the J6 for IP addresses and port Assignments and any firewall issues and
conducts bandwidth analysis
Link 16 Manager - Correct Answers -Coordinate Link 16 initialization process, manage
network role assignments and connectivity between JUs to include activation and
deactivation of relays
Link 11/11B Manager - Correct Answers -Coordinates Link 11 entry and exit
procedures, monitors link performance and track throughput rates, polling sequences
Joint Interface Control Cell - Correct Answers -Task-organized team of MTN
experiences personnel that directly support the JICO enabling successful operations
MTA refers to the physical configuration, functional organization, and operational
procedures that make up the MTN. MTN refers to the MTA and the data flowing through
the MTA systems. - Correct Answers -True
Which of the following statements best describes the purpose of the MTN? - Correct
Answers -To satisfy the warfighters' IERS
Universal Joint Task List (UJTL) - Correct Answers -Serves as a common language and
common reference system to communicate mission requirements.
, Adaptive Planning and Execution (APEX) - Correct Answers -A combination of joint
policies and procedures that addresses unique communications and systems interface
requirements to provide joint commanders and planners with a capability to plan and
conduct joint military operations.
Capabilities and Limitations - Correct Answers -Reflects system capabilities and
provides detail about system quirks or interoperability issues.
Operations Plan (OPLAN) - Correct Answers -A complete and detailed joint plan
containing a full description of the concept of operations all annexes applicable to the
plan, and time-phased force and deployment data (TPFDD).
Operations Order (OPORD) - Correct Answers -A directive issued by a commander to
subordinate commanders for the purpose of effecting the coordinated execution of an
operation.
Which entities have responsibilities for the MTA/MTN: Select all that apply. - Correct
Answers -Commander Joint Task Force (CJTF)
Joint Interface Control Officer (JICO)
Area Air Defense Commander (AADC)
Which of the following set types conveys information that applies to the entire message
and is located at the end of the message? - Correct Answers -Remarks Set (RMKS)
Which of the following special characters indicates the end of a set? - Correct Answers
-//
Which of the statements accurately describes repetition in a USMTF message? Select
all that apply. - Correct Answers --Not all information can be repeated
-Segments are repeatable by definition
______, ______, ______, and _______, are considered the initial sets and occupy the
first set format positions in each message format. - Correct Answers -EXER, OPER,
MSGID, REF
Which field identifies the originator of the reference in this example?
REF/B/GENADMIN/-/613 AIR OPERATIONS CENTER/011600ZAUG2015// - Correct
Answers -Field 4
Which of the following sets identifies the special point of contact information for the
OPTASK LINK? - Correct Answers -POCLINK
Which of the following statements highlights the differences between MTA and MTN?
Select all that apply. - Correct Answers -MTA= Physical connections + Equipment
MTN= MTA + Tactical Data
