Page |1
BCTC INDUSTRIAL MAINTENANCE
TECHNOLOGY AMTEC (NOCTI MECHATRONIC)
REVIEW 2025 QUESTIONS AND ANSWERS.
1. If you inhale phenolic fumes what would happen to you? - Correct
answer-Trouble breathing
2. A _________ fire extinguisher should be used on an electrical fire. -
Correct answer-Class C
3. What does OSHA stand for? - Correct answer-Occupational Safety &
Health Administration
4. This type of drawing represents a three-dimensional object using several
two-dimensional views of the object. - Correct answer-Orthographic
5. What are linear dimensions usually expressed in? - Correct answer-
Decimal or Fractional Units
6. What does a filled triangle represent in a fluid power diagram? - Correct
answer-Hydraulic Flow
, Page |2
7. What can happen if bolts and nuts are not properly torqued? - Correct
answer-They wear out quickly and can cause failure.
8. What safety practice is used to prevent equipment from being
energized? - Correct answer-Lockout/Tagout
9. A Safety Data Sheet (SDS) provides information about first aid
measures, stability and reactivity, and _____? - Correct answer-
Handling and Storage
10. Which of the following is not true of a title block? - Correct answer-
Format is the same from company to company.
11. A NFPA 70E is a regulation that provides guidelines and details for
___________? - Correct answer-Electrical safety
12. GFCI devices are used for what purpose? - Correct answer-To
prevent a person from being electrocuted.
13. A person with serious electrical injury should be moved only when
_______. - Correct answer-They are in immediate danger
, Page |3
14. What must be provided by chemical manufacturers, distributors, and
importers to anyone who will work with these potentially dangerous
materials? - Correct answer-Safety Data Sheet (SDS).
15. You come across a fellow employee who is being electrocuted by
becoming attached to a live electrical circuit, what is the first thing you
should do? - Correct answer-Shut off the circuit.
16. What would slippery floors and cluttered walkways be considered in
the workplace? - Correct answer-Physical hazards.
17. What tool is used to measure the turning force when tightening a
fastener? - Correct answer-Torque Wrench
18. When working on an electrical, fluid power, or mechanical system a
____ procedure should be performed to lock out the energy. - Correct
answer-LOTO
19. The section of a technical report which summarizes the report's
contents is called what? - Correct answer-Abstract
BCTC INDUSTRIAL MAINTENANCE
TECHNOLOGY AMTEC (NOCTI MECHATRONIC)
REVIEW 2025 QUESTIONS AND ANSWERS.
1. If you inhale phenolic fumes what would happen to you? - Correct
answer-Trouble breathing
2. A _________ fire extinguisher should be used on an electrical fire. -
Correct answer-Class C
3. What does OSHA stand for? - Correct answer-Occupational Safety &
Health Administration
4. This type of drawing represents a three-dimensional object using several
two-dimensional views of the object. - Correct answer-Orthographic
5. What are linear dimensions usually expressed in? - Correct answer-
Decimal or Fractional Units
6. What does a filled triangle represent in a fluid power diagram? - Correct
answer-Hydraulic Flow
, Page |2
7. What can happen if bolts and nuts are not properly torqued? - Correct
answer-They wear out quickly and can cause failure.
8. What safety practice is used to prevent equipment from being
energized? - Correct answer-Lockout/Tagout
9. A Safety Data Sheet (SDS) provides information about first aid
measures, stability and reactivity, and _____? - Correct answer-
Handling and Storage
10. Which of the following is not true of a title block? - Correct answer-
Format is the same from company to company.
11. A NFPA 70E is a regulation that provides guidelines and details for
___________? - Correct answer-Electrical safety
12. GFCI devices are used for what purpose? - Correct answer-To
prevent a person from being electrocuted.
13. A person with serious electrical injury should be moved only when
_______. - Correct answer-They are in immediate danger
, Page |3
14. What must be provided by chemical manufacturers, distributors, and
importers to anyone who will work with these potentially dangerous
materials? - Correct answer-Safety Data Sheet (SDS).
15. You come across a fellow employee who is being electrocuted by
becoming attached to a live electrical circuit, what is the first thing you
should do? - Correct answer-Shut off the circuit.
16. What would slippery floors and cluttered walkways be considered in
the workplace? - Correct answer-Physical hazards.
17. What tool is used to measure the turning force when tightening a
fastener? - Correct answer-Torque Wrench
18. When working on an electrical, fluid power, or mechanical system a
____ procedure should be performed to lock out the energy. - Correct
answer-LOTO
19. The section of a technical report which summarizes the report's
contents is called what? - Correct answer-Abstract
