NEIEP 200 FINAL REVIEW (ACTUAL 2025)
SOLVED 100% VERIFIED CORRECT
Which lay of wire rope has the strand wires in line with the
rope axis?
Regular Lay
Which of the following wrenches is used to thread pipes with
polished surfaces together?
Strap Wrench
Which of the following statements applies to the use of a
hacksaw on the job?
Hacksaw blades must be installed with the teeth facing
forward.
The operation of the down final limit switch will prevent
movement of the car by normal operating devices in ...
both directions of travel
,Which of the following statements is correct regarding
ladders?
Metal ladders should never be used
What safety precaution is most important when using rollers
to move heavy equipment?
Pipe rollers must be picked up by the hollow inner pan
We have an expert-written solution to this problem!
What are two things a compound mitre saw does best at the
same time?
Bevel and mitre cuts can be made at the same time.
When the pit down final limit switch is actuated, the car...
Will not run at all
Why do we use laminated glass in the walls of glass elevator
cabs?
, . If the glass cracks the plastic interlayer holds the fragments
For carpet installation, if the cab area measures 94 inches by
62 inches and you need an additional six inches on each side
to account for waste during cutting, how many square yards of
carpet do you need for this job?
6
Which is an advantage of lang lay ropes over regular lay
ropes?
They are more flexible
Tension on the governor rope is maintained by using a
Tension Sheave
A reference mark from which vertical measurements are made
is known as a
Bench Mark
SOLVED 100% VERIFIED CORRECT
Which lay of wire rope has the strand wires in line with the
rope axis?
Regular Lay
Which of the following wrenches is used to thread pipes with
polished surfaces together?
Strap Wrench
Which of the following statements applies to the use of a
hacksaw on the job?
Hacksaw blades must be installed with the teeth facing
forward.
The operation of the down final limit switch will prevent
movement of the car by normal operating devices in ...
both directions of travel
,Which of the following statements is correct regarding
ladders?
Metal ladders should never be used
What safety precaution is most important when using rollers
to move heavy equipment?
Pipe rollers must be picked up by the hollow inner pan
We have an expert-written solution to this problem!
What are two things a compound mitre saw does best at the
same time?
Bevel and mitre cuts can be made at the same time.
When the pit down final limit switch is actuated, the car...
Will not run at all
Why do we use laminated glass in the walls of glass elevator
cabs?
, . If the glass cracks the plastic interlayer holds the fragments
For carpet installation, if the cab area measures 94 inches by
62 inches and you need an additional six inches on each side
to account for waste during cutting, how many square yards of
carpet do you need for this job?
6
Which is an advantage of lang lay ropes over regular lay
ropes?
They are more flexible
Tension on the governor rope is maintained by using a
Tension Sheave
A reference mark from which vertical measurements are made
is known as a
Bench Mark
