1|Page
TEXAS LP-GAS DISPENSING EXAM LATEST 2025 ACTUAL EXAM
WITH COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
When filling forklift cylinders by weight,it is important to
______________________________ - ANSWER-verify that the
cylinder is not overfilled at the conclusion of the filling process
TW is required when calculating cylinder filling by _____ -
ANSWER-weight
TW - ANSWER-tare weight
WC - ANSWER-water capacity
When changing out a forklift cylinder the cylinder service valve
should be ____ prior to making a the hose connection to the
cylinder - ANSWER-closed
,2|Page
The location pin on the forklift is used to
_________________________ - ANSWER-properly position the
cylinder on the forklift
When filling cylinders by weight, the ____ is used to determine
that the cylinder has reached its maximum permitted filling level -
ANSWER-scale
Permanently mounted mobile motor fuel and RV tanks are built to
____ specifications - ANSWER-ASME
Propane auto gas refueling stations and dispensaries are typically
used to refuel ____ ____ ____ - ANSWER-vehicles
Forklifts
RV tanks
All ignition sources must be atleast ____ feet from the motor fuel
dispenser - ANSWER-25
, 3|Page
RV tanks are used to supply propane appliances; therefore,
appliance pilots and electronic ignition systems must be ____
____ before beginning the filling operation - ANSWER-turned off
When relighting pilot lights, carefully follow ____ ____ ____ -
ANSWER-appliance manufacturers instructions
For motor fuel tanks, a propane decal is typically located near the
____ ____ ____ of the vehicle near the bumper - ANSWER-lower
right rear
When filling RV's the service valve on the tank and
___________________________ should be shut off to eliminate
all ignition sources - ANSWER-appliance pilots and ignition
systems
When a white mist appears from the fixed maximum liquid level
gauge while filling a mobile motor fuel or RV tank immediately
shut off the ____ & ____ - ANSWER-hose
Valve
TEXAS LP-GAS DISPENSING EXAM LATEST 2025 ACTUAL EXAM
WITH COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
When filling forklift cylinders by weight,it is important to
______________________________ - ANSWER-verify that the
cylinder is not overfilled at the conclusion of the filling process
TW is required when calculating cylinder filling by _____ -
ANSWER-weight
TW - ANSWER-tare weight
WC - ANSWER-water capacity
When changing out a forklift cylinder the cylinder service valve
should be ____ prior to making a the hose connection to the
cylinder - ANSWER-closed
,2|Page
The location pin on the forklift is used to
_________________________ - ANSWER-properly position the
cylinder on the forklift
When filling cylinders by weight, the ____ is used to determine
that the cylinder has reached its maximum permitted filling level -
ANSWER-scale
Permanently mounted mobile motor fuel and RV tanks are built to
____ specifications - ANSWER-ASME
Propane auto gas refueling stations and dispensaries are typically
used to refuel ____ ____ ____ - ANSWER-vehicles
Forklifts
RV tanks
All ignition sources must be atleast ____ feet from the motor fuel
dispenser - ANSWER-25
, 3|Page
RV tanks are used to supply propane appliances; therefore,
appliance pilots and electronic ignition systems must be ____
____ before beginning the filling operation - ANSWER-turned off
When relighting pilot lights, carefully follow ____ ____ ____ -
ANSWER-appliance manufacturers instructions
For motor fuel tanks, a propane decal is typically located near the
____ ____ ____ of the vehicle near the bumper - ANSWER-lower
right rear
When filling RV's the service valve on the tank and
___________________________ should be shut off to eliminate
all ignition sources - ANSWER-appliance pilots and ignition
systems
When a white mist appears from the fixed maximum liquid level
gauge while filling a mobile motor fuel or RV tank immediately
shut off the ____ & ____ - ANSWER-hose
Valve
