NCCCO TSS MANITEX ACTUAL EXAM
COMPLETE ACCURATE EXAM
QUESTIONS WITH DETAILED VERIFIED
ANSWERS (100% CORRECT ANSWERS)
Guaranteed Pass!!
1. According to OSHA, which accessible area of an operating crane must
always be barricaded? - ANSWER The swing radius of the rear of the
rotating superstructure
2. What is the OSHA regulation governing cranes in construction? - ANSWER
1926.1400
3. According to ASME, what percentage of the manufacturer's crane rating
must not be exceeded if a load test is done on a repaired crane? - ANSWER
100%
4. Where is the tipping axis of a crawler crane located? - ANSWER It
depends if the idler or sprocket are in line or offset from the track rollers
5. What should be done with materials placed under overhead energized
power lines? - ANSWER NOT be lifted by crane
, 6. What determines the amount of deduction required for an erected jib that
is not being used? - ANSWER The effective weight of the jib
7. What happens to ground bearing pressure if you move a crawler crane from
soft ground to harder ground? - ANSWER It increases
8. How should the wheels of a crane be positioned when it is set up for
working on outriggers? - ANSWER Just high enough off the ground to
relieve the tires of crane weight
9. Where is the tipping axis of a crawler crane located? - ANSWER It
depends if the idler or sprocket are in line or offset from the track rollers
10.Where are the Standard Method hand signals found? - ANSWER OSHA
Subpart CC
11.A truck crane is set up on outriggers. The part of the load chart governed by
stability is based on what percentage of the cranes capacity? - ANSWER
85%
12.Truck crane capacities are usually greater over the _________ - ANSWER
Rear
13.If the operator makes two audible signals when moving a crane, he/she
intends to ______________ - ANSWER Go ahead
COMPLETE ACCURATE EXAM
QUESTIONS WITH DETAILED VERIFIED
ANSWERS (100% CORRECT ANSWERS)
Guaranteed Pass!!
1. According to OSHA, which accessible area of an operating crane must
always be barricaded? - ANSWER The swing radius of the rear of the
rotating superstructure
2. What is the OSHA regulation governing cranes in construction? - ANSWER
1926.1400
3. According to ASME, what percentage of the manufacturer's crane rating
must not be exceeded if a load test is done on a repaired crane? - ANSWER
100%
4. Where is the tipping axis of a crawler crane located? - ANSWER It
depends if the idler or sprocket are in line or offset from the track rollers
5. What should be done with materials placed under overhead energized
power lines? - ANSWER NOT be lifted by crane
, 6. What determines the amount of deduction required for an erected jib that
is not being used? - ANSWER The effective weight of the jib
7. What happens to ground bearing pressure if you move a crawler crane from
soft ground to harder ground? - ANSWER It increases
8. How should the wheels of a crane be positioned when it is set up for
working on outriggers? - ANSWER Just high enough off the ground to
relieve the tires of crane weight
9. Where is the tipping axis of a crawler crane located? - ANSWER It
depends if the idler or sprocket are in line or offset from the track rollers
10.Where are the Standard Method hand signals found? - ANSWER OSHA
Subpart CC
11.A truck crane is set up on outriggers. The part of the load chart governed by
stability is based on what percentage of the cranes capacity? - ANSWER
85%
12.Truck crane capacities are usually greater over the _________ - ANSWER
Rear
13.If the operator makes two audible signals when moving a crane, he/she
intends to ______________ - ANSWER Go ahead
