BECC Mod 2 Questions With 100% Verified Correct Answers (Guaranteed Pass)

BECC Mod 2 Questions With 100% Verified Correct Answers (Guaranteed Pass) What is a standard key used by watch standers and maintenance personnel? - answer- Operator key Who has the only keys to the key locker? - answer-Key issue control custodian, Engineering duty officer, and the Engineering officer Who must any breach of security procedures be reported to? - answer-The Engineering officer Who can approve the resumption of normal operations? - answer-Engineer officer, CDO, or CO Who is responsible for physical security of the ship and takes direct control of security forces in the event of a security alert? - answer-CDO In-port, represents the CO, and reports to the CDO - answer-OOD Who controls access to the ship and receives hourly reports from the sounding and security watch? - answer OOD In cases involving fire or flooding, what information do you state? - answer-Type of casualty, location, compartment noun name, your name, rate/rank and telephone number What is the purpose of the EOSS? - answer-Provides safe, accurate and standardized procedures tailored to each ship What does EOSS stand for? - answer-Engineering Operational Sequencing System The use of the EOSS is? - answer-Mandatory Changes in the EOSS must be authorized by? - answer-CO What are the 3 parts of the EOSS? - answer-User Guide, Engineering Operational Procedures(EOP), Engineering Operational Casualty Control(EOCC) Where is the EOSS located? - answer-In the Engineering Spaces. There is also a CD- ROM kept in the log room Master Plant Procedures are structured so that they are the overall controlling document used by? - answer-The EOOW What provides proper valve alignment for each combination of tanks, components, fuel stations, and systems that are used when accomplishing an evolution? - answer-Tank Table What provides tank capacities? - answer-Tank Status Diagrams The act of opening an electrical circuit breaker or switch at a power supply - answer-De- energize The act of closing an electrical circuit breaker or switch at a power supply - answer- Energize The opening or shutting of valves in a piping system or the positioning of switches or controls in an electrical system to permit the required flow of fluids or current - answerAlign What is the recommended minimum actions that must be completed prior to plant start- up? - answer-The Master Pre-light off check list (MLOC) What are the 4 actions of the EOCC? - answer-Controlling, Immediate, Supplemantary and Restoring What 2 actions of the EOCC must be memorized? - answer-Controlling and Immediate Watch station actions that are taken to bring the plant to a safe and stable operation condition - answer-Supplementary actions Actions taken to stop spread of casualty and minimize plant losses - answer-Immediate actions How many parts per million of oil is sufficient enough to cause a sheen? - answer-15-20 Why do you need to remove any oil from the bilges? - answer-It may generate vapors that can ignite with spark or open flame In accordance with Navy policy, sewage cannot be discharged how many miles from land? - answer-3 miles What does ORM stand for? - answer-Operational Risk Management What are the 5 steps of ORM? - answer-1. Identify hazards 2. Assess hazards 3. Make risk decisions 4. Implement controls 5. Supervise follow up What are the 3 levels of ORM? - answer-The time critical level, deliberate level and the in-depth level Ensure hazardous areas around machinery and elevators are - answer-Color coded True or False: You should lock escape shuttles so the cannot be opened from the inside? - answer False What should you wear where the potential exists for falling, slipping, or being thrown or carried into the water? - answer-A lifejacket Before attempting to perform repairs or maintenance, equipment should be - answer-De- energized and properly tagged out of service How are extremely hot surfaces, especially piping, identified? - answer-Aluminum paint True or false: Clothing such as an exposure suit, fire retardant utilities(with long sleeves) or coveralls must be worn in all engineering spaces at all times? - answer-True Who do you notify when entering a tank, void, or space not normally manned? - answer- Department head or Division officer What is a fireproof material that possesses high tensile strength, good heat and electrical insulating capabilities, and moderate to good chemical resistance? - answerAsbestos What could be the most deadly of all hazards? - answer-Radiation Before working aloft, always receive permission from - answer-OOD Minimizes the transfer of heat to or from the surrounding atmosphere - answer-Thermal insulation