@PROFDOCDIGITALLIBRARIES
AERIAL CDC QUESTIONS WITH
ANSWERS 2025 LATEST UPDATED
AND GRADED 100%
Hydraulic systems in aerial apparatus are used to: - Solution Stabilize the
apparatus and extend the aerial device
Identify Three conditions where you should drive an aerial apparatus in low
gear. - Solution 1. Climbing a hill
PR
2. Traveling around a corner
3. Approaching an intersection
When checking the hydraulic fluid level: - Solution Use a dipstick or sight
gauge
O
Select three elements of the aerial device that must be visually inspected. -
Solution 1. Elevating platform assembly
FD
2. Ladder rungs
3. Equipment
The function of the hydraulic system is to: - Solution Provide power for
O
operating the various hydraulic components needed to stabilize the
apparatus and operate the aerial device
C
Select three areas that should be checked when looking at tires. - Solution
1. Condition
2. Type
3. Inflation
A liquid surge effect may occur: - Solution When an aerial apparatus's tank
is not completely full
A turntable's function is best described as: - Solution Provides continuous
rotation on a horizontal plane
, @PROFDOCDIGITALLIBRARIES
When maintaining aerial apparatus records, you should always: - Solution
Refer to your department's SOP's for specific guidance
The most common type of aerial fire apparatus operated in North America
is the: - Solution Aerial ladder apparatus
To check the overall condition of the engine and pump, perform the: -
Solution Pumping test
Identify three features of elevated platform waterway systems. - Solution
1. Attack lines
2. Two nozzles at the platform
3. Handlines
PR
Aerial apparatus driver/operators are regulated by: - Solution All of the
above
Identify five major features or functions of quints. - Solution 1. size of the
O
water tank
2. amount of supply and attack hose
3. array and length of grounds ladders
FD
4. pre-piped waterway on the aerial apparatus
5. size of the fire pump.
When checking the automatic transmission fluid driver/operators should
O
perform a: - Solution Hot and cold check
To provide electric power to multiple connections, aerial apparatus
C
driver/operators should use: - Solution Junction boxes
When drafting from a static source, it is important to remember to: -
Solution Make your connections before moving into position
For all types of apparatus, the first step when engaging the PTO is to: -
Solution Set the parking brake
Identify two true statements about foam streams operated from elevated
master streams. - Solution 1. Non aerated foam has fast knock-down but
doesn't form a blanket over the fuel
2. One acceptable foam concentrate is AFFF
AERIAL CDC QUESTIONS WITH
ANSWERS 2025 LATEST UPDATED
AND GRADED 100%
Hydraulic systems in aerial apparatus are used to: - Solution Stabilize the
apparatus and extend the aerial device
Identify Three conditions where you should drive an aerial apparatus in low
gear. - Solution 1. Climbing a hill
PR
2. Traveling around a corner
3. Approaching an intersection
When checking the hydraulic fluid level: - Solution Use a dipstick or sight
gauge
O
Select three elements of the aerial device that must be visually inspected. -
Solution 1. Elevating platform assembly
FD
2. Ladder rungs
3. Equipment
The function of the hydraulic system is to: - Solution Provide power for
O
operating the various hydraulic components needed to stabilize the
apparatus and operate the aerial device
C
Select three areas that should be checked when looking at tires. - Solution
1. Condition
2. Type
3. Inflation
A liquid surge effect may occur: - Solution When an aerial apparatus's tank
is not completely full
A turntable's function is best described as: - Solution Provides continuous
rotation on a horizontal plane
, @PROFDOCDIGITALLIBRARIES
When maintaining aerial apparatus records, you should always: - Solution
Refer to your department's SOP's for specific guidance
The most common type of aerial fire apparatus operated in North America
is the: - Solution Aerial ladder apparatus
To check the overall condition of the engine and pump, perform the: -
Solution Pumping test
Identify three features of elevated platform waterway systems. - Solution
1. Attack lines
2. Two nozzles at the platform
3. Handlines
PR
Aerial apparatus driver/operators are regulated by: - Solution All of the
above
Identify five major features or functions of quints. - Solution 1. size of the
O
water tank
2. amount of supply and attack hose
3. array and length of grounds ladders
FD
4. pre-piped waterway on the aerial apparatus
5. size of the fire pump.
When checking the automatic transmission fluid driver/operators should
O
perform a: - Solution Hot and cold check
To provide electric power to multiple connections, aerial apparatus
C
driver/operators should use: - Solution Junction boxes
When drafting from a static source, it is important to remember to: -
Solution Make your connections before moving into position
For all types of apparatus, the first step when engaging the PTO is to: -
Solution Set the parking brake
Identify two true statements about foam streams operated from elevated
master streams. - Solution 1. Non aerated foam has fast knock-down but
doesn't form a blanket over the fuel
2. One acceptable foam concentrate is AFFF
