ASNT VT LEVEL II EXAM 2025/2026/ACTUAL COMPLETE
ALL REAL EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS ) | ALREADY GRADED A+ | LATEST
EXAM .
C. - ANSWER-. Slag and non-metallic inclusions are most likely
caused by:
A. moisture in the weld joint
B. high current
C. inadequate interpass cleaning
D. loss of shielding gas
E. both A and D
A. - ANSWER- The examination procedure checklist contains:
A. minimum examination requirements
B. maximum examination requirements
C. both minimum and maximum examination requirements
D. average examination requirements
B. - ANSWER- Boroscopes can be used in:
A. direct visual examination
, - ANSWER-
B. remote visual examination
C. translucent visual examination
D. all of the above
D. - ANSWER-. A distinct advantage of a fiberscope over a
borescope is that a fiberscope is:
A. lightweight
B. rigid
C. simpler to use
D. flexible
C. - ANSWER-. A purpose of a flux coating on an electrode is
to:
A. protect the electrode while in storage
B. keep the electrode dry during use
C. provide a slag blanket to protect the weld from atmosphere
D. all of the above
B. - ANSWER- The most commonly used method of recording
visual examination results is the:
A. objective method
B. subjective method
,C. soft copy method
D. hard copy method
D. - ANSWER-. According to ASME Section V, a written
procedure must contain:
A. VE personnel qualifications
B. the date of the examination
C. a Jaeger eye chart
D. a description of the surface cleaning method
E. all of the above
D. - ANSWER- NDE personnel should be:
A. qualified in accordance with SNT-TC-1A
B. certified by the employer
C. familiar with all processes used in fabricating the item(s)
being examined
D. all of the above
E. only A and B above
B. - ANSWER. In the above figure, what does "A" represent?
A. counterbore
, - ANSWER-
B. groove angle
C. groove face
D. bevel angle
C. - ANSWER- In the above figure, what does "B" represent?
A. Counterbore
B. groove angle
C. groove face
D. bevel angle
A. - ANSWER-. In the above figure, what does "C" represent?
A. Counterbore
B. groove angle
C. groove face
D. bevel angle
A. - ANSWER- Extrusions are susceptible to:
A. scabs
B. cracks
C. slugs
D. inclusions
ALL REAL EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS ) | ALREADY GRADED A+ | LATEST
EXAM .
C. - ANSWER-. Slag and non-metallic inclusions are most likely
caused by:
A. moisture in the weld joint
B. high current
C. inadequate interpass cleaning
D. loss of shielding gas
E. both A and D
A. - ANSWER- The examination procedure checklist contains:
A. minimum examination requirements
B. maximum examination requirements
C. both minimum and maximum examination requirements
D. average examination requirements
B. - ANSWER- Boroscopes can be used in:
A. direct visual examination
, - ANSWER-
B. remote visual examination
C. translucent visual examination
D. all of the above
D. - ANSWER-. A distinct advantage of a fiberscope over a
borescope is that a fiberscope is:
A. lightweight
B. rigid
C. simpler to use
D. flexible
C. - ANSWER-. A purpose of a flux coating on an electrode is
to:
A. protect the electrode while in storage
B. keep the electrode dry during use
C. provide a slag blanket to protect the weld from atmosphere
D. all of the above
B. - ANSWER- The most commonly used method of recording
visual examination results is the:
A. objective method
B. subjective method
,C. soft copy method
D. hard copy method
D. - ANSWER-. According to ASME Section V, a written
procedure must contain:
A. VE personnel qualifications
B. the date of the examination
C. a Jaeger eye chart
D. a description of the surface cleaning method
E. all of the above
D. - ANSWER- NDE personnel should be:
A. qualified in accordance with SNT-TC-1A
B. certified by the employer
C. familiar with all processes used in fabricating the item(s)
being examined
D. all of the above
E. only A and B above
B. - ANSWER. In the above figure, what does "A" represent?
A. counterbore
, - ANSWER-
B. groove angle
C. groove face
D. bevel angle
C. - ANSWER- In the above figure, what does "B" represent?
A. Counterbore
B. groove angle
C. groove face
D. bevel angle
A. - ANSWER-. In the above figure, what does "C" represent?
A. Counterbore
B. groove angle
C. groove face
D. bevel angle
A. - ANSWER- Extrusions are susceptible to:
A. scabs
B. cracks
C. slugs
D. inclusions
