PRO TOOLS 210M | QUESTIONS
WITH 100% CORRECT
ANSWERS|VERIFIED/NEWEST
UPDATE
Save
Terms in this set (104)
The Song Start Position is?
a.First beat of Bar 1
a. First beat of
b. First beat of Bar 0
Bar 1
c. Where the cursor begins
d. Timecode 01:00:00:00
e. None of these above
, What edit command lets you tell Pro
Tools how long a loop is in bars and
realign the Bars:Beats grid
accordingly?
b. Identify Beat a. Beat Detective
b. Identify Beat
c. Elastic Audio
d. Sync Point
e. Relative Grid
What monitoring mode lets you hear
Auto Input the live inputs on record-enabled
Monitoring tracks whenever Pro Tools is
stopped or is recording?
An alternative operation of setting
the song start is?
a. Change Meter
c. Move Song
b. Cut Time
Start
c. Move Song Start
d. Miller time
e. Insert Time
, Which input mode(s) will enable you
to monitor live input on record-
enabled tracks when the Pro Tools
transport is stopped?
b. Auto Input
a. Input Only Monitoring
Monitoring
b. Auto Input Monitoring
c. Track Monitoring
d. All of the Above
e. None of these above
What is the synchronization signal
that contains timing pulses based on
tempo (at a rate of 24 pulses per
quarter-note)?
d. MIDI Beat
a. Beat Detective
Clock
b. Identify Beat
c. Sync Point
d. MIDI Beat Clock
e. Tick Timebase
, What command allows you to
punch-in, in Pro Tools
instantaneously while recording?
a. Track Punch
b. Quick Punch
b. Quick Punch
c. Destructive Punch
d. Loop Record
e. Input Only Monitoring
What command allows you to
prevent certain MIDI messages from
being recorded?
b. MIDI Input a. MIDI Beat Clock
Filter b. MIDI Input Filter
c. MIDI Thru
d. MIDI Setup
e. MIDI Merge
What monitoring mode will always
Input Only pass through their live input, and
Monitoring anything recorded to the track will
not be heard?
WITH 100% CORRECT
ANSWERS|VERIFIED/NEWEST
UPDATE
Save
Terms in this set (104)
The Song Start Position is?
a.First beat of Bar 1
a. First beat of
b. First beat of Bar 0
Bar 1
c. Where the cursor begins
d. Timecode 01:00:00:00
e. None of these above
, What edit command lets you tell Pro
Tools how long a loop is in bars and
realign the Bars:Beats grid
accordingly?
b. Identify Beat a. Beat Detective
b. Identify Beat
c. Elastic Audio
d. Sync Point
e. Relative Grid
What monitoring mode lets you hear
Auto Input the live inputs on record-enabled
Monitoring tracks whenever Pro Tools is
stopped or is recording?
An alternative operation of setting
the song start is?
a. Change Meter
c. Move Song
b. Cut Time
Start
c. Move Song Start
d. Miller time
e. Insert Time
, Which input mode(s) will enable you
to monitor live input on record-
enabled tracks when the Pro Tools
transport is stopped?
b. Auto Input
a. Input Only Monitoring
Monitoring
b. Auto Input Monitoring
c. Track Monitoring
d. All of the Above
e. None of these above
What is the synchronization signal
that contains timing pulses based on
tempo (at a rate of 24 pulses per
quarter-note)?
d. MIDI Beat
a. Beat Detective
Clock
b. Identify Beat
c. Sync Point
d. MIDI Beat Clock
e. Tick Timebase
, What command allows you to
punch-in, in Pro Tools
instantaneously while recording?
a. Track Punch
b. Quick Punch
b. Quick Punch
c. Destructive Punch
d. Loop Record
e. Input Only Monitoring
What command allows you to
prevent certain MIDI messages from
being recorded?
b. MIDI Input a. MIDI Beat Clock
Filter b. MIDI Input Filter
c. MIDI Thru
d. MIDI Setup
e. MIDI Merge
What monitoring mode will always
Input Only pass through their live input, and
Monitoring anything recorded to the track will
not be heard?
