NEIEP 200 Final Review Study Guide / @i @i @i @i @i @i
73 Questions and Answers 2025. @i @i @i @i
Which lay of wire rope has the strand wires in line with the rope axis? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Regular Lay
@i @i
At what speed should the counterweight safeties be set to trip? -
@i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Up to 10% higher than the car governor
@i @i @i @i @i @i @i @i
Which type of safety uses an oil buffer between the car and safety planks? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Type C @i @i
What is the purpose of the terminal motion switch? -
@i @i @i @i @i @i @i @i @i @i
@i ✅ slow down and stop the car automatically at or near the top or bottom landing
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
If you have a 3500 lb. car rated at 4000 lbs. capacity, how much should the counterweight assembly weigh
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
for a normal 40% installation? -
@i @i @i @i @i @i @i
@i ✅ 5100 lbs. @i @i
When the pit directional limit switch is actuated, the normal circuits will allow the car to run -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Up @i
_______should not be disassembled in the field. - @i @i @i @i @i @i @i @i
@i ✅ Oil Buffers
@i @i
The loss of traction between the hoist ropes and the machine driver when the counterweight lands on its
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
buffer avoids... - @i @i @i
@i ✅ The elevator car being pulled into the over head.
@i @i @i @i @i @i @i @i @i
Refer to Table 1. With a safety factor of 5, what is the breaking strength for 1 1/8" nylon rope? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ 52,000 lbs.
@i @i
, Which of the following applies to rope usage? -
@i @i @i @i @i @i @i @i @i
@i ✅ Prevent manila rope from unraveling by using whipping.
@i @i @i @i @i @i @i @i
What does the designation 3/8" 6 X 30 improved plow steel mean? -
@i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ It is a high strength cable with 6 strands composed of 30 wires per strand?
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
When using Crosby clips, which of the following statements is correct? -
@i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ To determine the correct minimum spacing multiply the rope diameter times 6.
@i @i @i @i @i @i @i @i @i @i @i @i
When handling and storing a freight platform, what do you need to keep in mind? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ With the platform on edge, handle it from the ends and move on rollers.
@i @i @i @i @i @i @i @i @i @i @i @i @i @i
Which of the following statements is true concerning capstans? -
@i @i @i @i @i @i @i @i @i @i
@i ✅ Both b, and c.
@i @i @i @i
b. Fasten the hoist to a beam or other building structure.
@i @i @i @i @i @i @i @i @i @i
c. To interrupt hoisting ease off on the pulling rope
@i @i @i @i @i @i @i @i @i
When choosing planks for hoisting, what must be considered? -
@i @i @i @i @i @i @i @i @i @i
@i ✅ Use only scaffold grade lumber
@i @i @i @i @i
The distance between the counterweight buffer strike plate and the striking surface of the counterweigh
@i @i @i @i @i @i @i @i @i @i @i @i @i @i
t buffer when the car floor is level with the top terminal landing is known as -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Runby @i
What type of wrench is used to align the holes for rail installation? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Spud Wrench
@i @i
Which of the following wrenches is used to thread pipes with polished surfaces together? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Strap Wrench
@i @i
73 Questions and Answers 2025. @i @i @i @i
Which lay of wire rope has the strand wires in line with the rope axis? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Regular Lay
@i @i
At what speed should the counterweight safeties be set to trip? -
@i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Up to 10% higher than the car governor
@i @i @i @i @i @i @i @i
Which type of safety uses an oil buffer between the car and safety planks? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Type C @i @i
What is the purpose of the terminal motion switch? -
@i @i @i @i @i @i @i @i @i @i
@i ✅ slow down and stop the car automatically at or near the top or bottom landing
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
If you have a 3500 lb. car rated at 4000 lbs. capacity, how much should the counterweight assembly weigh
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
for a normal 40% installation? -
@i @i @i @i @i @i @i
@i ✅ 5100 lbs. @i @i
When the pit directional limit switch is actuated, the normal circuits will allow the car to run -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Up @i
_______should not be disassembled in the field. - @i @i @i @i @i @i @i @i
@i ✅ Oil Buffers
@i @i
The loss of traction between the hoist ropes and the machine driver when the counterweight lands on its
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
buffer avoids... - @i @i @i
@i ✅ The elevator car being pulled into the over head.
@i @i @i @i @i @i @i @i @i
Refer to Table 1. With a safety factor of 5, what is the breaking strength for 1 1/8" nylon rope? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ 52,000 lbs.
@i @i
, Which of the following applies to rope usage? -
@i @i @i @i @i @i @i @i @i
@i ✅ Prevent manila rope from unraveling by using whipping.
@i @i @i @i @i @i @i @i
What does the designation 3/8" 6 X 30 improved plow steel mean? -
@i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ It is a high strength cable with 6 strands composed of 30 wires per strand?
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
When using Crosby clips, which of the following statements is correct? -
@i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ To determine the correct minimum spacing multiply the rope diameter times 6.
@i @i @i @i @i @i @i @i @i @i @i @i
When handling and storing a freight platform, what do you need to keep in mind? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ With the platform on edge, handle it from the ends and move on rollers.
@i @i @i @i @i @i @i @i @i @i @i @i @i @i
Which of the following statements is true concerning capstans? -
@i @i @i @i @i @i @i @i @i @i
@i ✅ Both b, and c.
@i @i @i @i
b. Fasten the hoist to a beam or other building structure.
@i @i @i @i @i @i @i @i @i @i
c. To interrupt hoisting ease off on the pulling rope
@i @i @i @i @i @i @i @i @i
When choosing planks for hoisting, what must be considered? -
@i @i @i @i @i @i @i @i @i @i
@i ✅ Use only scaffold grade lumber
@i @i @i @i @i
The distance between the counterweight buffer strike plate and the striking surface of the counterweigh
@i @i @i @i @i @i @i @i @i @i @i @i @i @i
t buffer when the car floor is level with the top terminal landing is known as -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Runby @i
What type of wrench is used to align the holes for rail installation? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Spud Wrench
@i @i
Which of the following wrenches is used to thread pipes with polished surfaces together? -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i
@i ✅ Strap Wrench
@i @i
