Class 200 final Exam 80 Questions and Answers.

Class 200 final Exam 80 Questions and Answers. @i @i @i @i @i @i @i




____________ ____________ should not be disassembled in the field - @i @i @i @i @i @i @i @i @i @i




@i ✔️Oil buffers
@i @i




Two safety precautions to be followed when first entering the elevator pit are to have the ___________ _
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i




__________ ___________open and the pit light on. - @i @i @i @i @i @i @i @i




@i ✔️Pit stop switch
@i @i @i




Tension on the governor rope is maintained by using a - @i @i @i @i @i @i @i @i @i @i @i




@i ✔️Tension sheave
@i @i




The ASME Safety Code requires oil buffers for elevators when traveling at a car speed of -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i




@i ✔️Over 200 FPM
@i @i @i




If the pit extends more than ______ feet below the sill of the access door, a fixed vertical ladder shall be lo
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i




cated within reach of the access door. -
@i @i @i @i @i @i @i @i




@i ✔️3 @i




If using a rope fall with 4 sheaves to lift 500 lbs. how much pulling force will be required?
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i




Add 10% to the weight of the load for each sheave. -
@i @i @i @i @i @i @i @i @i @i @i @i @i




@i ✔️175 lbs. @i @i




OSHA requires that slings used for hoisting be inspected at what intervals? -
@i @i @i @i @i @i @i @i @i @i @i @i @i




@i ✔️Each day before using
@i @i @i @i




Spring buffers are used only when the elevator travels at ___________ FPM or less. -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i




@i ✔️200 @i




All measurements necessary for the installation of various components in the pit are measured with refer
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i




ence to the - @i @i @i @i




@i ✔️guide rails
@i @i

, ASME Safety Code requires that a fully compressed oil buffer should return to its normal position within _
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i




________ seconds after the elevator car or counterweight has been removed. -
@i @i @i @i @i @i @i @i @i @i @i @i




@i ✔️90
@i




Wood used to construct a hoisting support must be -
@i @i @i @i @i @i @i @i @i @i




@i ✔️scaffold grade
@i @i




What is a sign of poor quality manila rope? -
@i @i @i @i @i @i @i @i @i @i




@i ✔️Dark colored fibers
@i @i @i




(True/False) All synthetics are impervious to sunlight. - @i @i @i @i @i @i @i @i




@i ✔️False
@i




(True/False) Good quality manila rope has a light yellow color with a silvery or pearly luster. -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i




@i ✔️True
@i




What is the minimum number and proper spacing of crosby clips for rope diameters from 1/2 to 3/4. -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i @i




@i ✔️3 crosby clips 6 times the rope diameter apart
@i @i @i @i @i @i @i @i @i




The cutting force is applied on the (forward/return) stroke when using a hacksaw. -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i




@i ✔️forward
@i




What type of lumber must be used for decking on scaffolding? -
@i @i @i @i @i @i @i @i @i @i @i @i




@i ✔️Scaffold grade
@i @i




Glass must be either ____________ or ____________ to hold the glass together if broken. -
@i @i @i @i @i @i @i @i @i @i @i @i @i @i @i




@i ✔️Laminated, Bonded
@i @i




What is the required height of an OSHA approved barricade? -
@i @i @i @i @i @i @i @i @i @i @i




@i ✔️42"
@i