Introduction to Joint MTN Operations JT101
Post Test 1 UPDATED ACTUAL Exam
Questions and CORRECT Answers
The ___________ refers to the physical systems that make up the Multi-TDL Network (MTN). -
CORRECT ANSWER - Multi-TDL Architecture (MTA)
Match the Tactical Data Link (TDL) to the SATCOM frequency band by which it is supported. -
CORRECT ANSWER - a) SHF SATCOM (*JREAP C (USN Unicast J (UTJ))*)
b) UHF SATCOM (*Satellite TDL-J / JREAP A*)
c) EHF SATCOM (*JREAP C Multicast (USN Multicast TDL-J (MTJ))*)
Which type of circuit provides simultaneous transmit and receive capability, allowing two-way
traffic between the stations on a single circuit. - CORRECT ANSWER - Duplex Circuit
The purpose of the ____________ is to satisfy the subset of warfighters' IERs specifically
facilitated by tactical data links. - CORRECT ANSWER - Joint Data Network Officer
(JDNO)
According to the MIL-STD-6016 what are the requirements for information to be passed
between and among joint forces and organizations, along with the technical interfaces, and
protocols called? - CORRECT ANSWER - Information Exchange Requirements (IERs)
Each JTF is responsible for a ___________ in support of the Joint Data Network (JDN). -
CORRECT ANSWER - Common Tactical Picture (CTP)
Which mandatory OPTASK LINK general information, non-link specific set indicates the
effective time period of the OPTASK LINK? - CORRECT ANSWER - PERIOD
Which Military Standard defines Link 11? - CORRECT ANSWER - MIL-STD-6011
Post Test 1 UPDATED ACTUAL Exam
Questions and CORRECT Answers
The ___________ refers to the physical systems that make up the Multi-TDL Network (MTN). -
CORRECT ANSWER - Multi-TDL Architecture (MTA)
Match the Tactical Data Link (TDL) to the SATCOM frequency band by which it is supported. -
CORRECT ANSWER - a) SHF SATCOM (*JREAP C (USN Unicast J (UTJ))*)
b) UHF SATCOM (*Satellite TDL-J / JREAP A*)
c) EHF SATCOM (*JREAP C Multicast (USN Multicast TDL-J (MTJ))*)
Which type of circuit provides simultaneous transmit and receive capability, allowing two-way
traffic between the stations on a single circuit. - CORRECT ANSWER - Duplex Circuit
The purpose of the ____________ is to satisfy the subset of warfighters' IERs specifically
facilitated by tactical data links. - CORRECT ANSWER - Joint Data Network Officer
(JDNO)
According to the MIL-STD-6016 what are the requirements for information to be passed
between and among joint forces and organizations, along with the technical interfaces, and
protocols called? - CORRECT ANSWER - Information Exchange Requirements (IERs)
Each JTF is responsible for a ___________ in support of the Joint Data Network (JDN). -
CORRECT ANSWER - Common Tactical Picture (CTP)
Which mandatory OPTASK LINK general information, non-link specific set indicates the
effective time period of the OPTASK LINK? - CORRECT ANSWER - PERIOD
Which Military Standard defines Link 11? - CORRECT ANSWER - MIL-STD-6011
