1
Auto200 level 1 bar smog inspector course
Questions with Correct Answers for Specific
Exam Mail
What are 2 types of tsi tests
Ans: 2500 rpm test; idle test
What are two types of asm test
Ans: 50/15 test; 25/25 test
What are the fuel caps that are used to calibrate the eis machine
Ans: Known good and bad fuel caps
What types of gases are used to calibratethe E I S machine
Ans:
What does dad stand for
Ans: Data acquisition device.
What completed copy of the invoice must the customer receive when they
drop off their vehicle for repairs?
Ans: Written estimate.
What is the most important part of completed work order
Pretest - Stuvia US
, 2
Ans: Customer authorization.
May a test and repair station sublet repairs? If so what repairs?
Ans: Exhaust prior to repair
When performing a smog inspection the registration needs to compare to
the vehicle, true or false
Ans: True
Are all of the required ECS components listed on the under hood in missions
label
Ans: No
Part of the ecs system has been removed from the vehicle. How should this
be entered in the eis?
Ans: Missing
The belt is missing from the air pump. There is no visual evidence of
tempering. How should it be entered into the eis?
Ans: Defective
What entry should be completed if the ignition system is COP?
Ans: Not required
How is nox measured in california emissions test?
Pretest - Stuvia US
Auto200 level 1 bar smog inspector course
Questions with Correct Answers for Specific
Exam Mail
What are 2 types of tsi tests
Ans: 2500 rpm test; idle test
What are two types of asm test
Ans: 50/15 test; 25/25 test
What are the fuel caps that are used to calibrate the eis machine
Ans: Known good and bad fuel caps
What types of gases are used to calibratethe E I S machine
Ans:
What does dad stand for
Ans: Data acquisition device.
What completed copy of the invoice must the customer receive when they
drop off their vehicle for repairs?
Ans: Written estimate.
What is the most important part of completed work order
Pretest - Stuvia US
, 2
Ans: Customer authorization.
May a test and repair station sublet repairs? If so what repairs?
Ans: Exhaust prior to repair
When performing a smog inspection the registration needs to compare to
the vehicle, true or false
Ans: True
Are all of the required ECS components listed on the under hood in missions
label
Ans: No
Part of the ecs system has been removed from the vehicle. How should this
be entered in the eis?
Ans: Missing
The belt is missing from the air pump. There is no visual evidence of
tempering. How should it be entered into the eis?
Ans: Defective
What entry should be completed if the ignition system is COP?
Ans: Not required
How is nox measured in california emissions test?
Pretest - Stuvia US
