NACE CIP 1 CBT Exam (Quizzes and Study Questions) and Correct Answers 2025/2026

NACE CIP 1 CBT Exam (Quizzes and Study Questions) and Correct Answers 2025/2026 How is the process of steel corrosion ALWAYS described? - Answer - electrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - Answer -zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ - Answer -decrease The electrolyte is a medium which carries the following type of current? - Answer -Ionic Corrosion occurring uniformly across a surface is called _____ - Answer -general corrosion When a conflict occurs on a coatings project, as the inspector, the preferred first course of action is to _____ - Answer -actively listen and endeavor to understand the positions of others A proper coating specification should contain information regarding ____, ____, and ____ - Answer -surface preparation standards, safety, and locations to be usedIs it ever okay to accept a gift from a contractor? - Answer -NO What should you do if you find discrepancies between the specification and the coating manufacturer's technical data sheet? - Answer -seek written clarification from the owner's representative What are the general components of inspection reports? - Answer -- results of inspection tests - location(s) of work - details of preparation and application Inspection reports typically provide sufficient detail permitting the owner to evaluate ___ ___ ___ ___ - Answer -- contractor's performance - inspector's performance - job progress - work interruptions As an inspector headed to the job site for the first time, where would you always find instruction regarding appropriate types of PPE? - Answer -Safety Data Sheet (SDS), previously called MSDS Materials inventory report should contain which of the following? - Answer -- quantity of each component of each material onsite - material batch numbers - date of materials arrival at job site and storage information The primary function of the coating inspector is _____ - Answer - specification complianceHigh humidity in the air during coating application can cause _____ - Answer -solvent entrapment The temperature at which moisture condenses on a su