SACA C-202 Electric Motor Control Systems
ACTUAL EXAM 2025/2026 QUESTIONS WITH
VERIFIED CORRECT SOLUTIONS || 100%
GUARANTEED PASS <BRAND NEW VERSION>
Equipment grounding involves connecting to earth ground all _____ parts of an
electrical system that do not carry current under normal conditions. - answer-
Metallic
A current as small as _____ can be fatal. - answer-100 mA
_____ stands for National Electrical Code. - answer-NEC
Standing on a wet floor _____ the resistance between you and ground,
increasing the possibility of severe shock. - answer-Decreases
You are required to wire something with a remote start button. What logic
circuit would you choose? - answer-OR
What logic circuit is done by wiring 2 normally closed switches, wired in series?
- answer-NOR
, What logic circuit is wired, where opening any car door will turn on the lights,
but you are required to close ALL the doors to shut them off? - answer-NAND
What device is typically used to control one circuit with contacts in another
circuit? - answer-Control Relay
The coil of a relay is a(n):
A.) Input Device
B.) Output Device
C.) Both A & B
D.) None of the above - answer-B.) Output Device
__________ is a method of representing one component with several symbols
in various locations on a ladder diagram. - answer-Detached Symbology
The type of control relay used on heavy duty applications - answer-Machine
Control Relay
(T/F) The main difference between a motor starter and a control relay is that
the motor starter includes overload protection, such as an overload relay. -
answer-True
How many overloads are needed for a 3-phase induction motor? - answer-3
What logic circuit is wired into the circuit so that it continues to energize itself
after a momentary input from a switch? - answer-Seal-in Circuit / Memory
ACTUAL EXAM 2025/2026 QUESTIONS WITH
VERIFIED CORRECT SOLUTIONS || 100%
GUARANTEED PASS <BRAND NEW VERSION>
Equipment grounding involves connecting to earth ground all _____ parts of an
electrical system that do not carry current under normal conditions. - answer-
Metallic
A current as small as _____ can be fatal. - answer-100 mA
_____ stands for National Electrical Code. - answer-NEC
Standing on a wet floor _____ the resistance between you and ground,
increasing the possibility of severe shock. - answer-Decreases
You are required to wire something with a remote start button. What logic
circuit would you choose? - answer-OR
What logic circuit is done by wiring 2 normally closed switches, wired in series?
- answer-NOR
, What logic circuit is wired, where opening any car door will turn on the lights,
but you are required to close ALL the doors to shut them off? - answer-NAND
What device is typically used to control one circuit with contacts in another
circuit? - answer-Control Relay
The coil of a relay is a(n):
A.) Input Device
B.) Output Device
C.) Both A & B
D.) None of the above - answer-B.) Output Device
__________ is a method of representing one component with several symbols
in various locations on a ladder diagram. - answer-Detached Symbology
The type of control relay used on heavy duty applications - answer-Machine
Control Relay
(T/F) The main difference between a motor starter and a control relay is that
the motor starter includes overload protection, such as an overload relay. -
answer-True
How many overloads are needed for a 3-phase induction motor? - answer-3
What logic circuit is wired into the circuit so that it continues to energize itself
after a momentary input from a switch? - answer-Seal-in Circuit / Memory
