6/4/25, 2:09 AM Fire Apparatus Driver/Operator - Pumper End of Course Exam
Fire Apparatus Driver/Operator - Pumper End of
Course Exam | Explore New 109 Questions and
Answers | 2025 Update | 100% Correct.
Correct
Incorrect
Fire Apparatus Driver/Operator - Pumper End of Course Exam
109 Correct terms
Questions and answers
hoseline
hoseline
hoseline
,6/4/25, 2:09 AM Fire Apparatus Driver/Operator - Pumper End of Course Exam
gpm, then: to:
The correct hose layout for the
One characteristic of discharge
FDC at a property with a
pressure relief valves is that they:
sprinkler system should be:
Don't know?
2 of 109
Term
One of the dangers of using foam concentrates in fire pumps is that the
solution can:
Give this one a go later!
A. Pump tends to overheat
B. Fire streams tends to pulsate (Correct Answer)
C. Seals on the discharge tend to leak
D. Pressures streams tends to be low
A. A overflow the pump housing
B. Strip the lubrication from valve seals (Correct Answer)
C. Foul the pump discharge
D. Create sediment in the pump housing
A. Move the apparatus safely to the left lane (Correct Answer)
,6/4/25, 2:09 AM Fire Apparatus Driver/Operator - Pumper End of Course Exam
F. Check the side streets or roads
A. That they are hard to handle (Correct Answer)
B. Their high friction loss
C. That they are not designed for positive pressure
D. Their collapsibility
Don't know?
3 of 109
Term
When a dry supply line is being charged, it is important to open the:
Give this one a go later!
A. Control Valve
B. Bleeder Valve (Correct Answer)
C. Gate Valve
D. Drain Valve
A. Check valve on the larger hydrant discharge
B. Globe valve on the smaller hydrant discharge
C. Gate valve on the smaller hydrant discharge (Correct Answer)
D. Needle valve on the larger hydrant discharge
, 6/4/25, 2:09 AM Fire Apparatus Driver/Operator - Pumper End of Course Exam
D. Maneuvering through the markers in 1, 2, 3, then 3, 2, 1 order
A. 4 and 6 inches (Correct Answer)
B. 3 and 5 inches
C. 6 and 12 inches
D. 2 ½ and 5 inches
Don't know?
4 of 109
Definition
A. There is 40 psi of residual pressure at each relay pumper
B. To pump 500 GPM, a pumper's rated capacity must be 1,000 GPM
C. There is 20 psi of residual pressure at each relay pumper (Correct
Answer)
D. To pump 750 GPM, a pumper's rated capacity must be 1,000 GPM
Give this one a go later!
One of the assumptions of a
One of the major disadvantages of
maximum distance relay method
large diameter hoses is:
is that:
Identify the FOUR steps for passing
Identify the true statement about a
through a straight section of a road
multi-stage fire pump
or highway
Fire Apparatus Driver/Operator - Pumper End of
Course Exam | Explore New 109 Questions and
Answers | 2025 Update | 100% Correct.
Correct
Incorrect
Fire Apparatus Driver/Operator - Pumper End of Course Exam
109 Correct terms
Questions and answers
hoseline
hoseline
hoseline
,6/4/25, 2:09 AM Fire Apparatus Driver/Operator - Pumper End of Course Exam
gpm, then: to:
The correct hose layout for the
One characteristic of discharge
FDC at a property with a
pressure relief valves is that they:
sprinkler system should be:
Don't know?
2 of 109
Term
One of the dangers of using foam concentrates in fire pumps is that the
solution can:
Give this one a go later!
A. Pump tends to overheat
B. Fire streams tends to pulsate (Correct Answer)
C. Seals on the discharge tend to leak
D. Pressures streams tends to be low
A. A overflow the pump housing
B. Strip the lubrication from valve seals (Correct Answer)
C. Foul the pump discharge
D. Create sediment in the pump housing
A. Move the apparatus safely to the left lane (Correct Answer)
,6/4/25, 2:09 AM Fire Apparatus Driver/Operator - Pumper End of Course Exam
F. Check the side streets or roads
A. That they are hard to handle (Correct Answer)
B. Their high friction loss
C. That they are not designed for positive pressure
D. Their collapsibility
Don't know?
3 of 109
Term
When a dry supply line is being charged, it is important to open the:
Give this one a go later!
A. Control Valve
B. Bleeder Valve (Correct Answer)
C. Gate Valve
D. Drain Valve
A. Check valve on the larger hydrant discharge
B. Globe valve on the smaller hydrant discharge
C. Gate valve on the smaller hydrant discharge (Correct Answer)
D. Needle valve on the larger hydrant discharge
, 6/4/25, 2:09 AM Fire Apparatus Driver/Operator - Pumper End of Course Exam
D. Maneuvering through the markers in 1, 2, 3, then 3, 2, 1 order
A. 4 and 6 inches (Correct Answer)
B. 3 and 5 inches
C. 6 and 12 inches
D. 2 ½ and 5 inches
Don't know?
4 of 109
Definition
A. There is 40 psi of residual pressure at each relay pumper
B. To pump 500 GPM, a pumper's rated capacity must be 1,000 GPM
C. There is 20 psi of residual pressure at each relay pumper (Correct
Answer)
D. To pump 750 GPM, a pumper's rated capacity must be 1,000 GPM
Give this one a go later!
One of the assumptions of a
One of the major disadvantages of
maximum distance relay method
large diameter hoses is:
is that:
Identify the FOUR steps for passing
Identify the true statement about a
through a straight section of a road
multi-stage fire pump
or highway
