STUDYSAGE
FSVO state REVIEW WITH HIGH YIELD
QUESTIONS AND 100% RIGHT/AUTHENTIC
ANSWERS|ALREADY GRADED A|GET A
PASS ON YOUR FIRST TRIAL|LATEST
UPDATED VERSION.
The purpose of using a spotter is to - CORRECT ANSWERS.✔️✔️the driver by
observing cross traffic the as the area in the blind spot
horizontal and vertical openings, the operator must know: To effectively judge the
ability of a vehicle to pass through areas of restricted - CORRECT
ANSWERS.✔️✔️vehicle dimensions.
Which driving skill would not require using a spotter? - CORRECT
ANSWERS.✔️✔️Diminishing clearance
The distance a vehicle travels from the point where you begin recognizing the
hazard until the apparatus comes to a complete stop is called the: - CORRECT
ANSWERS.✔️✔️total stopping distance.
The confined space turnaround maneuver allows an operator to turn the
apparatus degrees - CORRECT ANSWERS.✔️✔️180
Improper tire pressures may cause - CORRECT ANSWERS.✔️✔️poor handling
One method of performing an apparatus/pretrip inspection is the - CORRECT
ANSWERS.✔️✔️walk-around method.
SUCCESS
, STUDYSAGE
Before shutdown the apparatus engine temperature should be allowed to
stabilize by idling it for minutes. - CORRECT ANSWERS.✔️✔️3 to 5
Checking for voltage, electrolyte level, and corrosion are all steps in inspecting: -
CORRECT ANSWERS.✔️✔️the battery.
While traveling in the center lane of a multiple-lane highway on an emergency
call, the vehicle in front of you stops. You should: - CORRECT
ANSWERS.✔️✔b ️ rake to reduce speed and pass on the left side of the vehicle.
The vacuum test requires a reading at the end of 5 minutes with no more than
inches of vacuum being lost. - CORRECT ANSWERS.✔️✔️10
When responding to emergencies, the use of warning devices: - CORRECT
ANSWERS.✔️✔d ️ oes not allow the driver to disregard other drivers.
When approaching unguarded railroad crossings, the driver shall: - CORRECT
ANSWERS.✔️✔️come to a complete stop.
Level I staging may be: - CORRECT ANSWERS.✔️✔u ️ sed in the initial response to
a fire or other incident involving more than one responding company.
Many accidents involving apparatus are caused by the operator - CORRECT
ANSWERS.✔️✔️misunderstanding the capabilities of the apparatus.
At a working fire, which apparatus has the highest priority for position? -
CORRECT ANSWERS.✔️✔️Aerial apparatus
SUCCESS
FSVO state REVIEW WITH HIGH YIELD
QUESTIONS AND 100% RIGHT/AUTHENTIC
ANSWERS|ALREADY GRADED A|GET A
PASS ON YOUR FIRST TRIAL|LATEST
UPDATED VERSION.
The purpose of using a spotter is to - CORRECT ANSWERS.✔️✔️the driver by
observing cross traffic the as the area in the blind spot
horizontal and vertical openings, the operator must know: To effectively judge the
ability of a vehicle to pass through areas of restricted - CORRECT
ANSWERS.✔️✔️vehicle dimensions.
Which driving skill would not require using a spotter? - CORRECT
ANSWERS.✔️✔️Diminishing clearance
The distance a vehicle travels from the point where you begin recognizing the
hazard until the apparatus comes to a complete stop is called the: - CORRECT
ANSWERS.✔️✔️total stopping distance.
The confined space turnaround maneuver allows an operator to turn the
apparatus degrees - CORRECT ANSWERS.✔️✔️180
Improper tire pressures may cause - CORRECT ANSWERS.✔️✔️poor handling
One method of performing an apparatus/pretrip inspection is the - CORRECT
ANSWERS.✔️✔️walk-around method.
SUCCESS
, STUDYSAGE
Before shutdown the apparatus engine temperature should be allowed to
stabilize by idling it for minutes. - CORRECT ANSWERS.✔️✔️3 to 5
Checking for voltage, electrolyte level, and corrosion are all steps in inspecting: -
CORRECT ANSWERS.✔️✔️the battery.
While traveling in the center lane of a multiple-lane highway on an emergency
call, the vehicle in front of you stops. You should: - CORRECT
ANSWERS.✔️✔b ️ rake to reduce speed and pass on the left side of the vehicle.
The vacuum test requires a reading at the end of 5 minutes with no more than
inches of vacuum being lost. - CORRECT ANSWERS.✔️✔️10
When responding to emergencies, the use of warning devices: - CORRECT
ANSWERS.✔️✔d ️ oes not allow the driver to disregard other drivers.
When approaching unguarded railroad crossings, the driver shall: - CORRECT
ANSWERS.✔️✔️come to a complete stop.
Level I staging may be: - CORRECT ANSWERS.✔️✔u ️ sed in the initial response to
a fire or other incident involving more than one responding company.
Many accidents involving apparatus are caused by the operator - CORRECT
ANSWERS.✔️✔️misunderstanding the capabilities of the apparatus.
At a working fire, which apparatus has the highest priority for position? -
CORRECT ANSWERS.✔️✔️Aerial apparatus
SUCCESS
