1
Fire Alarm
Certificate of Fitness For Supervision
of Fire Alarm Systems S-95 Exam
Questions with Correct Verified
Solutions 100% Guaranteed Pass
1. Single-Station Smoke Alarm - ANS ✔An assembly incorporating
the detector, the control equipment, and the alarm-sounding device
in one unit, operated from a power supply either in the unit or
obtained at the point of installation.
2. Smoke Alarm - ANS ✔A single - or multiple- station alarm
responsive to smoke and not connected to a fire alarm system.
3. Smoke Detector Maintenance Company Certificate - ANS ✔A
certificate issued by the commissioner to a person engaged in the
business of performing smoke detector cleaning and testing, which
authorizes such person to engage in such business and supervise the
performance of such cleaning and testing by certificate of fitness
holders.
4. Trouble Signal - ANS ✔A signal initiated by the fire alarm system
or device indicative of a fault in a monitored circuit or component.
5. Unnecessary Alarm - ANS ✔An alarm signal transmitted by a fire
alarm system which functioned as designed, but for which a
department response proved unnecessary. An example is an alarm
Fire Alarm Systems S-95
, 2
Fire Alarm
triggered by smoke from a lit cigarette in a non-smoking area, when
the presence of such smoke does not implicate fire safety concerns.
6. Unwarranted Alarm - ANS ✔An alarm signal transmitted by a fire
alarm system which failed to function as designed as a result of
improper installation, improper maintenance, malfunction, or other
factor. Example are alarms resulting from improper smoke detector
placement, improper detector setting for installed location, lack of
system maintenance, and control panel malfunction. It is important
to know that the alarm verification feature reduces the number of
these alarms.
7. Supervisory Signals - ANS ✔Signals which Indicate that a system
or device being monitored has been compromised or is in an
abnormal state. Will audibly and visually annunciate at the FACP to
indicate the condition needs to be investigated and corrected. The
FACP will also send a signal to an FDNY approved central station.
8. Lamp Test - ANS ✔This function is used on some FACP's to check
the condition of the light emitting diodes (LEDs) on the FACP.
9. Remote Annunciator Panel - ANS ✔When installed shall function
for visual notification of alarm, supervisory or trouble conditions
only.
10. Addressable System Smoke Detectors - ANS ✔Provide an
alarm indication to a control unit. In addition, they also signal the
location of the alarm.
11. Intelligent System Smoke Detectors - ANS ✔Send
information about smoke conditions to the control unit. The detector
Fire Alarm Systems S-95
Fire Alarm
Certificate of Fitness For Supervision
of Fire Alarm Systems S-95 Exam
Questions with Correct Verified
Solutions 100% Guaranteed Pass
1. Single-Station Smoke Alarm - ANS ✔An assembly incorporating
the detector, the control equipment, and the alarm-sounding device
in one unit, operated from a power supply either in the unit or
obtained at the point of installation.
2. Smoke Alarm - ANS ✔A single - or multiple- station alarm
responsive to smoke and not connected to a fire alarm system.
3. Smoke Detector Maintenance Company Certificate - ANS ✔A
certificate issued by the commissioner to a person engaged in the
business of performing smoke detector cleaning and testing, which
authorizes such person to engage in such business and supervise the
performance of such cleaning and testing by certificate of fitness
holders.
4. Trouble Signal - ANS ✔A signal initiated by the fire alarm system
or device indicative of a fault in a monitored circuit or component.
5. Unnecessary Alarm - ANS ✔An alarm signal transmitted by a fire
alarm system which functioned as designed, but for which a
department response proved unnecessary. An example is an alarm
Fire Alarm Systems S-95
, 2
Fire Alarm
triggered by smoke from a lit cigarette in a non-smoking area, when
the presence of such smoke does not implicate fire safety concerns.
6. Unwarranted Alarm - ANS ✔An alarm signal transmitted by a fire
alarm system which failed to function as designed as a result of
improper installation, improper maintenance, malfunction, or other
factor. Example are alarms resulting from improper smoke detector
placement, improper detector setting for installed location, lack of
system maintenance, and control panel malfunction. It is important
to know that the alarm verification feature reduces the number of
these alarms.
7. Supervisory Signals - ANS ✔Signals which Indicate that a system
or device being monitored has been compromised or is in an
abnormal state. Will audibly and visually annunciate at the FACP to
indicate the condition needs to be investigated and corrected. The
FACP will also send a signal to an FDNY approved central station.
8. Lamp Test - ANS ✔This function is used on some FACP's to check
the condition of the light emitting diodes (LEDs) on the FACP.
9. Remote Annunciator Panel - ANS ✔When installed shall function
for visual notification of alarm, supervisory or trouble conditions
only.
10. Addressable System Smoke Detectors - ANS ✔Provide an
alarm indication to a control unit. In addition, they also signal the
location of the alarm.
11. Intelligent System Smoke Detectors - ANS ✔Send
information about smoke conditions to the control unit. The detector
Fire Alarm Systems S-95
