AAAE ACE Study Questions Module 1
Questions with Correct Answers |100% Verified
1. What category accounts for between .25% and 1% of total U.S.
passenger enplanements?: Medium Hub
2. What shows the capital development needs of an airport over a 20
year period?: The Master Plan
3. What depicts the airport property boundary, the various tracts of land
acquired for development, and the method of acquisition.: Airport
Property Map
4. A Boeing 747, with a wingspan of 108', a tail height of 34' and a length
of 108' falls into what design group?: Design group III (3)
5. What is formed by imaginary lines connecting the visibility points of
two different runways?: Runway Visibility Zones
6. What is the most critical capacity determinant?: Runway configuration
1/4
, 7.Of the following, Runway, Taxiway, Taxi lane and Runway Safety area,
which is considered a non-movement area?: Taxi lane
8. For a GA airport to be included in the NPIAS, it must meet what
criteria?-
: Open to the public, greater than 20 miles from a NPIAS airport.
9. Name the four GA categories.: National, Regional, Local, &
Basic (DKX is a regional)
10. Runway orientation must provide for at least what % of wind
coverage?-
: 95%
11.An airport airspace drawing reflects surfaces defined in what part of 14
CFR?: Part 77
12.The FAA report to Congress that contains a 5 year financial estimate
of AIP-eligible developments is called?: NPIAS (National Plan of
Integrated Airport Systems)
13.Commercial Service Airports are defined as public airports receiving
scheduled passenger service, and having or more emplaned
passengers per year..: 2500
2/4
Questions with Correct Answers |100% Verified
1. What category accounts for between .25% and 1% of total U.S.
passenger enplanements?: Medium Hub
2. What shows the capital development needs of an airport over a 20
year period?: The Master Plan
3. What depicts the airport property boundary, the various tracts of land
acquired for development, and the method of acquisition.: Airport
Property Map
4. A Boeing 747, with a wingspan of 108', a tail height of 34' and a length
of 108' falls into what design group?: Design group III (3)
5. What is formed by imaginary lines connecting the visibility points of
two different runways?: Runway Visibility Zones
6. What is the most critical capacity determinant?: Runway configuration
1/4
, 7.Of the following, Runway, Taxiway, Taxi lane and Runway Safety area,
which is considered a non-movement area?: Taxi lane
8. For a GA airport to be included in the NPIAS, it must meet what
criteria?-
: Open to the public, greater than 20 miles from a NPIAS airport.
9. Name the four GA categories.: National, Regional, Local, &
Basic (DKX is a regional)
10. Runway orientation must provide for at least what % of wind
coverage?-
: 95%
11.An airport airspace drawing reflects surfaces defined in what part of 14
CFR?: Part 77
12.The FAA report to Congress that contains a 5 year financial estimate
of AIP-eligible developments is called?: NPIAS (National Plan of
Integrated Airport Systems)
13.Commercial Service Airports are defined as public airports receiving
scheduled passenger service, and having or more emplaned
passengers per year..: 2500
2/4
