Science Engineering Mechanical Engineering
NCCCO Telescopic Boom Crane- Swing Cab(TLL)
2025 EXAM QUESTIONS AND CORRECT
DETAILED ANSWERS WITH (VERIFIED ANSWERS)
|ALREADY GRADED A+||NEWEST VERSION
Save
Practice questions for this set
Learn 1 /7 Study using Learn
According to OSHA 1926 subpart cc, floats/pads must be fastened to the
outrigger/stabilizers when
Select the correct definition
Determined by the crane
1 Longest section can be overloaded 2
manufacturer
3 They are in use 4 Off the supporting surface
Don't know?
, A crane is operating with a Block under the float or pad to achieve a 90 degree
long boom, on outriggers, angle between the cylinder rod and the float or pad
on uneven ground. Under
these conditions it is
important to
What is the purpose of a Indicates the extended length of boom
boom length indicator?
According to OSHA 1926 They are in use
subpart cc, floats/pads
must be fastened to the
outrigger/stabilizers when
A crane's jib is offset 15 Increase
degrees versus it's original
0 degree offset and the
boom angle remains
unchanged, the load
radius will
When leaving telescopic Fully retracted and stowed
boom cranes unattended
overnight or for longer
periods, the boom should
be
On a telescopic boom Determined by the crane manufacturer
truck crane that has all 5
outriggers properly
positioned, the working
area diagram will indicate
the "over front" area is
According to OSHA 1926 The manufacturer
subpart cc, who
determines if a crane can
be used for pick and carry
operations?
NCCCO Telescopic Boom Crane- Swing Cab(TLL)
2025 EXAM QUESTIONS AND CORRECT
DETAILED ANSWERS WITH (VERIFIED ANSWERS)
|ALREADY GRADED A+||NEWEST VERSION
Save
Practice questions for this set
Learn 1 /7 Study using Learn
According to OSHA 1926 subpart cc, floats/pads must be fastened to the
outrigger/stabilizers when
Select the correct definition
Determined by the crane
1 Longest section can be overloaded 2
manufacturer
3 They are in use 4 Off the supporting surface
Don't know?
, A crane is operating with a Block under the float or pad to achieve a 90 degree
long boom, on outriggers, angle between the cylinder rod and the float or pad
on uneven ground. Under
these conditions it is
important to
What is the purpose of a Indicates the extended length of boom
boom length indicator?
According to OSHA 1926 They are in use
subpart cc, floats/pads
must be fastened to the
outrigger/stabilizers when
A crane's jib is offset 15 Increase
degrees versus it's original
0 degree offset and the
boom angle remains
unchanged, the load
radius will
When leaving telescopic Fully retracted and stowed
boom cranes unattended
overnight or for longer
periods, the boom should
be
On a telescopic boom Determined by the crane manufacturer
truck crane that has all 5
outriggers properly
positioned, the working
area diagram will indicate
the "over front" area is
According to OSHA 1926 The manufacturer
subpart cc, who
determines if a crane can
be used for pick and carry
operations?
