6/11/25, 9:19 AM NCTI Field Tech 2 to 3
NCTI FIELD TECH 2 TO 3 ACTUAL EXAM
2025\LATEST VERSION WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
\ASSURED PASS ALREADY GRADED A+
What is the difference The placement of pair numbers 3 and 4
between the wiring
configurations for a
residential 8-position, 8-
contact(8P8C) modular plug
and jack in the Universal
Service Order Codes (USOC)
and ANSI/TIA/EIA 570-B
How is silver satin cable used Reversed at opposite ends, or cross-pinned
to connect telephone
equipment to wall outlets
typically pinned
In unshielded twisted pair Ground Fault
(UTP) cable, what is the
term that describes when
an information-carrying
conductor makes contact
with a grounded
conductor
After resolving the problem Verify that the problem has been resolved and that
with the premises wiring phone service is running perfectly on all phones
issue, which of the
following is the next step
in the six-step process
that the tech should
take
1/28
,6/11/25, 9:19 AM NCTI Field Tech 2 to 3
If the telephone wiring is in Break the loop into smaller sections and retest the two
the bus sections to identify which one has the wiring error.
topology and the twisted-
Continue to divide the section with the error into smaller
pair cable tester is
sections until the wiring error is identified
connected at the embedded
multimedia terminal
adapter (EMTA) with the
remote
unit connected to the last
outlet in the
loop, what is the quickest
way to locate the
incorrectly wired outlet if
the tester
indicates a wiring error?
How should the digital Use the voltmeter function; both the network interface device
multimeter (DMM) be used (NID) and the
embedded multimedia terminal adapter (EMTA) provide a steady
to troubleshoot problems
on-hook voltage
in the telephone wiring?
What is it called when Ad-Hoc Mode
several computers are
sharing files without a
WAP
What is the standard AES
encryption method used
with WPA2
When configuring a wireless To avoid telling hackers exactly what the device is
router, why is changing the
service set identifier (SSID)
from the device default
recommended
Which mode uses a wireless Infrastructure
access point (WAP)
connected to a wired
network
In regard to Wi-Fi networks, To enable connection to a Wi-Fi network without a Windows
interface
2/28
, 6/11/25, 9:19 AM NCTI Field Tech 2 to 3
what is WPS used for
Which encryption method is WPA2
the most secure for a
wireless network
How many channels are 11
available with IEEE 802.11g
What is the last step of the Apply Security
basic wireless access point
(WAP) setup
All 802.11 standards use one of 2.4 GHz and 5 GHz bands
two
frequency bands. What are
these frequency bands
What uses the 2.4 GHz band 802.11g
and runs at 54 Mbps
Which organization regulates The Federal Communications Commision (FCC)
the use of wireless local area
network (WLAN)
devices in the United States
Which of the following IEEE 802.11
802.11 wireless local area
network (WLAN) standards
specifies both spread
spectrum RF and
Infrared (IR) transmission tech
Why has it become cost- The cost of wireless tech has decreased and the quality has
effective for increased
enterprise companies to
integrate wireless local area
network (WLAN) segments
into their networks
3/28
NCTI FIELD TECH 2 TO 3 ACTUAL EXAM
2025\LATEST VERSION WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
\ASSURED PASS ALREADY GRADED A+
What is the difference The placement of pair numbers 3 and 4
between the wiring
configurations for a
residential 8-position, 8-
contact(8P8C) modular plug
and jack in the Universal
Service Order Codes (USOC)
and ANSI/TIA/EIA 570-B
How is silver satin cable used Reversed at opposite ends, or cross-pinned
to connect telephone
equipment to wall outlets
typically pinned
In unshielded twisted pair Ground Fault
(UTP) cable, what is the
term that describes when
an information-carrying
conductor makes contact
with a grounded
conductor
After resolving the problem Verify that the problem has been resolved and that
with the premises wiring phone service is running perfectly on all phones
issue, which of the
following is the next step
in the six-step process
that the tech should
take
1/28
,6/11/25, 9:19 AM NCTI Field Tech 2 to 3
If the telephone wiring is in Break the loop into smaller sections and retest the two
the bus sections to identify which one has the wiring error.
topology and the twisted-
Continue to divide the section with the error into smaller
pair cable tester is
sections until the wiring error is identified
connected at the embedded
multimedia terminal
adapter (EMTA) with the
remote
unit connected to the last
outlet in the
loop, what is the quickest
way to locate the
incorrectly wired outlet if
the tester
indicates a wiring error?
How should the digital Use the voltmeter function; both the network interface device
multimeter (DMM) be used (NID) and the
embedded multimedia terminal adapter (EMTA) provide a steady
to troubleshoot problems
on-hook voltage
in the telephone wiring?
What is it called when Ad-Hoc Mode
several computers are
sharing files without a
WAP
What is the standard AES
encryption method used
with WPA2
When configuring a wireless To avoid telling hackers exactly what the device is
router, why is changing the
service set identifier (SSID)
from the device default
recommended
Which mode uses a wireless Infrastructure
access point (WAP)
connected to a wired
network
In regard to Wi-Fi networks, To enable connection to a Wi-Fi network without a Windows
interface
2/28
, 6/11/25, 9:19 AM NCTI Field Tech 2 to 3
what is WPS used for
Which encryption method is WPA2
the most secure for a
wireless network
How many channels are 11
available with IEEE 802.11g
What is the last step of the Apply Security
basic wireless access point
(WAP) setup
All 802.11 standards use one of 2.4 GHz and 5 GHz bands
two
frequency bands. What are
these frequency bands
What uses the 2.4 GHz band 802.11g
and runs at 54 Mbps
Which organization regulates The Federal Communications Commision (FCC)
the use of wireless local area
network (WLAN)
devices in the United States
Which of the following IEEE 802.11
802.11 wireless local area
network (WLAN) standards
specifies both spread
spectrum RF and
Infrared (IR) transmission tech
Why has it become cost- The cost of wireless tech has decreased and the quality has
effective for increased
enterprise companies to
integrate wireless local area
network (WLAN) segments
into their networks
3/28
