Forklift OSHA Certification Prep Pro: Step-by-Step Protocols & Hazard Prevention | Latest Update GUARANTEED SUCCESS

Forklift OSHA Certification Prep Pro:
Step-by-Step Protocols & Hazard
Prevention | Latest Update GUARANTEED
SUCCESS
When parking or leaving your truck, you should:
A. Park or leave your truck in a safe area away from traffic.
B. Lower the forks until they are flat on the floor.
C. Turn-off the engine.
D. Set the parking brake and set the directional control to neutral.
E. All of the above.
All of the above
All industrial trucks (lift trucks) are equipped with controls which
allow you to
raise/lower and tilt the forks.
A. True
B. False
True
Of the three load positions illustrated below, which is the most
stable?
3




Rear wheel steering is used on lift trucks because it gives the
operator greater control
when using the forks.
A. True
B. False
True

, Always check the air pressure in tires from the side, not by facing
the tread.
A. True
B. False
False
All industrial trucks (lift trucks) are equipped with a clutch.
A. True
B. False
False
Which of the following is NOT a type of lift truck?
A. Gasoline Powered
B. Diesel Powered
C. Electric Powered
D. Air-cooled Powered
Air-cooled powered
Wide and long loads are more unstable than other types of loads.
A. True
B. False
True
9. If the lift mechanism on your lift fails, you should try to repair
the chains or hydraulic
system yourself.
A. True
B. False
False
The load capacity of a truck can be found on its data plate.
A. True
B. False
True
It is part of your job to complete a Daily Operator's Report after
you have thoroughly