OM 300 Exam 2 Newest 2025
OM 300 EXAM 2 NEWEST 2025 WITH COMPLETE 100
QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+||NEWEST VERSION!!
Which of the following is a critical component of additive manufacturing?
A.
Computer-aided design (CAD)
B.
Design for manufacturing and assembly (DFMA)
C.
Standard for the exchange of product data (STEPD)
D.
Computer-aided manufacturing (CAM) - ANSWER-A. Computer-aided design (CAD)
Features such as the yellow line for first downs on televised football games and your GPS
location on a smartphone map is an example of what term? - ANSWER-Augmented Reality
The choice of producing the component internally or purchasing the component externally is
known as what? - ANSWER-The make-or-buy decision
What are the three Ps in the triple bottom line of the three Ps? - ANSWER-People, Planet and
Profit
Which of the following considers forward and reverse product flows over the entire life cycle? -
ANSWER-reverse logistics
1|Page
, OM 300 Exam 2 Newest 2025
Managing quality helps build successful strategies of - ANSWER-differentiation, low cost and
response
Which of the following costs is NOT a cost of quality?
A. Lost Goodwill
B. Research and Development
C. Scrap
D. Rework - ANSWER-B. Research and Development
What is the Japanese term used to describe continuous improvement efforts? - ANSWER-Kaizen
To develop a standard or benchmark, firms need to start with - ANSWER-determining WHAT to
benchmark
Which of the following is NOT true about Six Sigma?
A.
It utilizes a five-step improvement model, DMAIC
B.
It is only applicable in manufacturing
C.
It was developed by Motorola in the 1980s
D.
It is a program designed to reduce defects to help lower costs - ANSWER-B. It is only applicable
in manufacturing
Cause-and-effect diagrams are also known as - ANSWER-fish-bone charts
2|Page
, OM 300 Exam 2 Newest 2025
A device or technique that ensures production of a good unit every time is a - ANSWER-Poka-
yoke
Attribute inspection measures - ANSWER-If the product is good or bad
Inspections should NOT take place - ANSWER-after costly or irreversible processes
Which of the following determinants of service quality means the firm performs the service
right the first time and that the firm honors its promises? - ANSWER-Reliability
Low-volume, high-variety production is best suited for which of the following process
strategies? - ANSWER-Process Focus
What is a drawing of the movement of material, product or people? - ANSWER-Flowchart
In many applications, human quality inspectors can be replaced effectively by - ANSWER-Vision
Systems
Which of the following is NOT a production technology that enhances production and
productivity?
A.
service blueprinting
B.
process control
C.
vision systems
D.
3|Page
, OM 300 Exam 2 Newest 2025
automatic identification systems - ANSWER-A. service blueprinting
Tim Urban, owner/manager of Urban's Motor Court in Key West, is considering outsourcing the
daily room cleanup for his motel to Duffy's Maid Service. Tim rents an average of 50 rooms for
each of 365 nights (365 × 50 equals the total rooms rented for the year). Tim's cost to clean a
room is $13.50. The Duffy's Maid Service quote is
$18.00 per room plus a fixed cost of $24,000 for sundry items such as uniforms with the motel's
name. Tim's annual fixed cost for space, equipment, and supplies is $60,000. What is the
crossover point for Tim? - ANSWER-8000 room nights
If the number of room nights is less than the crossover point, then is oursourcing or not
outsourcing the best option? - ANSWER-Outsourcing
Based on the given room nights that Tim expects to rent
(18,250), the best option is - ANSWER-Not outsourcing
A large quantity and large variety of products are produced in - ANSWER-mass customization
What is an electronically guided and controlled cart used to move materials? - ANSWER-AGV
Amy Xia's plant is designed to produce 7,000 hammers per day but is limited to making 6,000
hammers per day because of the time needed to change equipment between styles of
hammers. The utilization rate is? - ANSWER-85.71%
If a plant has an effective capacity of 6,500
and an efficiency of 88%, then its actual (planned) output - ANSWER-5,720 units
Under ideal conditions, a service bay at a Fast Lube can serve
4|Page
OM 300 EXAM 2 NEWEST 2025 WITH COMPLETE 100
QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+||NEWEST VERSION!!
Which of the following is a critical component of additive manufacturing?
A.
Computer-aided design (CAD)
B.
Design for manufacturing and assembly (DFMA)
C.
Standard for the exchange of product data (STEPD)
D.
Computer-aided manufacturing (CAM) - ANSWER-A. Computer-aided design (CAD)
Features such as the yellow line for first downs on televised football games and your GPS
location on a smartphone map is an example of what term? - ANSWER-Augmented Reality
The choice of producing the component internally or purchasing the component externally is
known as what? - ANSWER-The make-or-buy decision
What are the three Ps in the triple bottom line of the three Ps? - ANSWER-People, Planet and
Profit
Which of the following considers forward and reverse product flows over the entire life cycle? -
ANSWER-reverse logistics
1|Page
, OM 300 Exam 2 Newest 2025
Managing quality helps build successful strategies of - ANSWER-differentiation, low cost and
response
Which of the following costs is NOT a cost of quality?
A. Lost Goodwill
B. Research and Development
C. Scrap
D. Rework - ANSWER-B. Research and Development
What is the Japanese term used to describe continuous improvement efforts? - ANSWER-Kaizen
To develop a standard or benchmark, firms need to start with - ANSWER-determining WHAT to
benchmark
Which of the following is NOT true about Six Sigma?
A.
It utilizes a five-step improvement model, DMAIC
B.
It is only applicable in manufacturing
C.
It was developed by Motorola in the 1980s
D.
It is a program designed to reduce defects to help lower costs - ANSWER-B. It is only applicable
in manufacturing
Cause-and-effect diagrams are also known as - ANSWER-fish-bone charts
2|Page
, OM 300 Exam 2 Newest 2025
A device or technique that ensures production of a good unit every time is a - ANSWER-Poka-
yoke
Attribute inspection measures - ANSWER-If the product is good or bad
Inspections should NOT take place - ANSWER-after costly or irreversible processes
Which of the following determinants of service quality means the firm performs the service
right the first time and that the firm honors its promises? - ANSWER-Reliability
Low-volume, high-variety production is best suited for which of the following process
strategies? - ANSWER-Process Focus
What is a drawing of the movement of material, product or people? - ANSWER-Flowchart
In many applications, human quality inspectors can be replaced effectively by - ANSWER-Vision
Systems
Which of the following is NOT a production technology that enhances production and
productivity?
A.
service blueprinting
B.
process control
C.
vision systems
D.
3|Page
, OM 300 Exam 2 Newest 2025
automatic identification systems - ANSWER-A. service blueprinting
Tim Urban, owner/manager of Urban's Motor Court in Key West, is considering outsourcing the
daily room cleanup for his motel to Duffy's Maid Service. Tim rents an average of 50 rooms for
each of 365 nights (365 × 50 equals the total rooms rented for the year). Tim's cost to clean a
room is $13.50. The Duffy's Maid Service quote is
$18.00 per room plus a fixed cost of $24,000 for sundry items such as uniforms with the motel's
name. Tim's annual fixed cost for space, equipment, and supplies is $60,000. What is the
crossover point for Tim? - ANSWER-8000 room nights
If the number of room nights is less than the crossover point, then is oursourcing or not
outsourcing the best option? - ANSWER-Outsourcing
Based on the given room nights that Tim expects to rent
(18,250), the best option is - ANSWER-Not outsourcing
A large quantity and large variety of products are produced in - ANSWER-mass customization
What is an electronically guided and controlled cart used to move materials? - ANSWER-AGV
Amy Xia's plant is designed to produce 7,000 hammers per day but is limited to making 6,000
hammers per day because of the time needed to change equipment between styles of
hammers. The utilization rate is? - ANSWER-85.71%
If a plant has an effective capacity of 6,500
and an efficiency of 88%, then its actual (planned) output - ANSWER-5,720 units
Under ideal conditions, a service bay at a Fast Lube can serve
4|Page
