Page | 1
CBSPD EXAM PREP 2025| BRAND NEW ACTUAL
EXAM WITH 100% VERIFIED QUESTIONS AND
CORRECT SOLUTIONS| GUARANTEED VALUE
PACK| ACE YOUR GRADES.
1. How many people annually undergo rigid and flexible
endoscopic procedures? - correct answer - 20 million
, Page | 2
2. A liquid chemical sterile processing system uses - correct
answer - a tabletop microprocessor-controlled
unit, a single use cup of PA-based sterilant, and a variety of
device trays and containers. With the proper temp for is 122 -
133 degrees and the exposure time to the sterilant is 12
minutes
3. during the sterilization phase the system monitors and verifies
__concentration (175 or greater), temp (122-133 degrees), and
exposure process (12 minutes - correct answer - Parametric
monitoring
4. steam enters the chamber as air is removed through the drain -
correct answer - Conditioning phase
5. begins when the thermocouple senses the constant pre-set
cycle temp - correct answer - Exposure phase
6. filtered air enters, steam is removed from the chamber, and the
pressure
inside the chamber returns to atmospheric pressure - correct
answer - Exhaust phase
, Page | 3
7. In the event of a load recall, info about specific load contents
can be obtained from: - correct answer - The sterilization log
8. If the sterilizer successfully killed all the bacteria in a biological
test, it will read as - correct answer - Negative
9. exposure time be for a Dry Heat sterilizer that was run at 160C
or 320F - correct answer - 2 hours
10. The amount of time it takes to kill 90% of the microbes
present on an object - correct answer - D-value
11. Most efficient type of dry sterilizer - correct answer -
Mechanical convection
12. confirmation that sterilization recommendations from the
manufacturer can be
, Page | 4
13. successfully undertaken in the hospital setting - correct
answer - Verification
14. portion of the steam sterilizer that measures steam temp and
automatically controls the flow of air and condensate from the
sterilizer chamber - correct answer - Thermostatic strap
15. steam sterilization heats items within the load using a heat
transfer process - correct answer - Convection
16. Dry heat sterilization heats items within the load using a heat
transfer
process - correct answer - Conduction
17. Cycle time for
items sterilized using ozone sterilization_ - correct answer - 4
hours
18. cycle time for items sterilized using hydrogen peroxide gas
plasma - correct answer - <1hour
CBSPD EXAM PREP 2025| BRAND NEW ACTUAL
EXAM WITH 100% VERIFIED QUESTIONS AND
CORRECT SOLUTIONS| GUARANTEED VALUE
PACK| ACE YOUR GRADES.
1. How many people annually undergo rigid and flexible
endoscopic procedures? - correct answer - 20 million
, Page | 2
2. A liquid chemical sterile processing system uses - correct
answer - a tabletop microprocessor-controlled
unit, a single use cup of PA-based sterilant, and a variety of
device trays and containers. With the proper temp for is 122 -
133 degrees and the exposure time to the sterilant is 12
minutes
3. during the sterilization phase the system monitors and verifies
__concentration (175 or greater), temp (122-133 degrees), and
exposure process (12 minutes - correct answer - Parametric
monitoring
4. steam enters the chamber as air is removed through the drain -
correct answer - Conditioning phase
5. begins when the thermocouple senses the constant pre-set
cycle temp - correct answer - Exposure phase
6. filtered air enters, steam is removed from the chamber, and the
pressure
inside the chamber returns to atmospheric pressure - correct
answer - Exhaust phase
, Page | 3
7. In the event of a load recall, info about specific load contents
can be obtained from: - correct answer - The sterilization log
8. If the sterilizer successfully killed all the bacteria in a biological
test, it will read as - correct answer - Negative
9. exposure time be for a Dry Heat sterilizer that was run at 160C
or 320F - correct answer - 2 hours
10. The amount of time it takes to kill 90% of the microbes
present on an object - correct answer - D-value
11. Most efficient type of dry sterilizer - correct answer -
Mechanical convection
12. confirmation that sterilization recommendations from the
manufacturer can be
, Page | 4
13. successfully undertaken in the hospital setting - correct
answer - Verification
14. portion of the steam sterilizer that measures steam temp and
automatically controls the flow of air and condensate from the
sterilizer chamber - correct answer - Thermostatic strap
15. steam sterilization heats items within the load using a heat
transfer process - correct answer - Convection
16. Dry heat sterilization heats items within the load using a heat
transfer
process - correct answer - Conduction
17. Cycle time for
items sterilized using ozone sterilization_ - correct answer - 4
hours
18. cycle time for items sterilized using hydrogen peroxide gas
plasma - correct answer - <1hour
