Questions and Answers 100%
Guaranteed Success | Already Rated A+
The best way to effect a blitz attack with an elevated master stream is to try to
deflect water off the __ of the fire room. - 🧠 ANSWER ✔✔ceiling
When stabilizing tractor-trailer aerial apparatus , maximum stability occurs when
the angle of the tractor is ___ degrees from the centerline of the trailer, and the
aerial ladder is operated toward the outside of the angle. - 🧠 ANSWER ✔✔60
The tractor-trailer apparatus should never be positioned with the tractor and trailer
at an angle: - 🧠 ANSWER ✔✔greater than 90 degrees
A gauge used to indicate water pressure in pounds-per-square-inch is a ___ gauge.
- 🧠 ANSWER ✔✔pressure
the rule of thumb for elevated master stream operations is - 🧠 ANSWER ✔✔75-
80- 80
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
1
,What is the flow from a 2-inch nozzle with ideal nozzle pressure? (gpm = 29.7 x
d2 x "'1NP) - 🧠 ANSWER ✔✔1063
Always locate the feeder hose __ of the aerial ladder - 🧠 ANSWER ✔✔in the
center
Elevated master streams can only be used in a defensive operation (T/F) - 🧠
ANSWER ✔✔F
Only operate elevated master streams when interior crews are either out of the
structure or in a place of safe refuge (T/F) - 🧠 ANSWER ✔✔T
The recommended nozzle pressure for solid bore master streams two inches or less
is __ psi - 🧠 ANSWER ✔✔80
The use of auxiliary hydraulic pumps on aerial devices should be limited to: - 🧠
ANSWER ✔✔bedding the aerial device after a main system failure occurs.
When lowering the aerial device, driver/operators should rotate the aerial device
until it
is positioned directly above the - 🧠 ANSWER ✔✔travel cradle
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
2
, Which of the following methods ensures that the aerial device is properly
positioned for storage - 🧠 ANSWER ✔✔indicator lights and Corresponding
markers and sensors
Before bedding an aerial device used for master stream ops, the operator must - 🧠
ANSWER ✔✔drain water from the system
Which of the following is an indicator of mechanical trouble with the aerial
device? - 🧠 ANSWER ✔✔Unusual noises or vibrations
B. Drifting of the aerial device when raised
C. Leaking hydraulic fluid
D. Overheating of any mechanical components
If any indicators of hydraulic failure with the aerial device occur, while operating
at a fire scene - 🧠 ANSWER ✔✔A. personnel should be removed from the aerial
device immediately.
B. the device should be taken out of service.
C. the device should be bedded using the auxiliary hydraulic pump
The purpose of hold-down locks on an aerial apparatus is to secure the - 🧠
ANSWER ✔✔aerial device for road travel
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
3