PJM OPERATIONS AND ALERTS PRACTICE TEST QUESTIONS LATEST UPDATE VERIFIED 2025

PJM OPERATIONS AND ALERTS PRACTICE TEST QUESTIONS LATEST UPDATE VERIFIED 2025 Example questions 1. Which of the following is NOT a limit that must be submitted to PJM for generating units? Emergency Max Dynamic Instability Eco Max Eco Min 2. What must generators obtain before taking a generating unit offline according to PJM regulations? State approval No approval needed PJM approval Federal approval 3. What is the term used for the signal PJM sends to generators to adjust their output? Output Signal Generation Command Capacity Alert Dispatch Rate 5. When must a request for a maintenance outage extension be submitted? Prior to the end of the outage At any time during the outage After the outage has ended Only during peak operational hours 6. Describe the significance of ordering generators to load spinning reserve in response to a unit trip in PJM operations. Ordering generators to load spinning reserve helps stabilize the grid by ensuring that there is enough immediate backup power available to counteract the loss of generation. It allows for the reduction of generation costs across the board. It serves to notify consumers of potential outages. It is a measure to increase the total generation capacity of the system. 7. PJM issues a cold weather alert when the forecasted temperature in the RTO or in a control zone is expected to be less than or equal to 32°F 5°F 0°F 10°F 8. What are the two types of reserves included in the Contingency Reserve? Active & Reactive Synchronized & Non-Synchronized Primary & Secondary Load & Generation 9. What is the primary reason PJM needs to be informed about a generator's