Millwright Level 1 Exam Questions
and Answers Latest | Graded A+.
Save
Terms in this set (343)
On a pedestal 1/8 inch
grinder, the gap
between the
grinding wheel
and work rest
should not
exceed:
The kind of aluminum oxide
abrasive material
used in grinding
wheels for
general purpose
applications is:
, protect the flanges from the
A blotter is used abrasize grit, display information
on a grinding about the wheel and compensate
wheel to: for the uneven surfaces on the
wheel
Flanges should 1/3 the diameter of the wheel
at least be:
The best wheel wire wheel
to use for
cleaning scale
and dirt off a
workpiece is the:
What is a natural made of natural material rather than
abrasive? synthetic
Under ability of a material to scratch or
properties of penetrate another material
abrasives, to
what does the
term hardness
refer?
, The ____ is the bond
part of the
wheel that holds
the grains
together
Markings for the Blotter
wheel
identification
can be found on
the _______
What is the Never run it faster that the max RPM
recommended of the grinding wheel
speed to run a
grinding wheel?
How should you Stand off to the side and wait a full
start a grinder? minute
Is 46 or 60 the 46
coarser grit?
What are the 2 Aluminum oxide and silicone
most commonly carbide
used abrasive
materials?
and Answers Latest | Graded A+.
Save
Terms in this set (343)
On a pedestal 1/8 inch
grinder, the gap
between the
grinding wheel
and work rest
should not
exceed:
The kind of aluminum oxide
abrasive material
used in grinding
wheels for
general purpose
applications is:
, protect the flanges from the
A blotter is used abrasize grit, display information
on a grinding about the wheel and compensate
wheel to: for the uneven surfaces on the
wheel
Flanges should 1/3 the diameter of the wheel
at least be:
The best wheel wire wheel
to use for
cleaning scale
and dirt off a
workpiece is the:
What is a natural made of natural material rather than
abrasive? synthetic
Under ability of a material to scratch or
properties of penetrate another material
abrasives, to
what does the
term hardness
refer?
, The ____ is the bond
part of the
wheel that holds
the grains
together
Markings for the Blotter
wheel
identification
can be found on
the _______
What is the Never run it faster that the max RPM
recommended of the grinding wheel
speed to run a
grinding wheel?
How should you Stand off to the side and wait a full
start a grinder? minute
Is 46 or 60 the 46
coarser grit?
What are the 2 Aluminum oxide and silicone
most commonly carbide
used abrasive
materials?
