NCCER Module 1 (safety) (2025) COMPLETE QUESTIONS With 100%
NCCER Module 1 (safety)
VerifiedStudySolutions,
online at https://quizlet.com/_8xbdhm
1. companies with strong safety cultures usually have incident and accident rates
lower?
2. what is a statement regarding safety? it's a learned behavior and
attitude
3. poor lighting, excessive noise, and inadequate guards unsafe conditions
for moving parts are examples of?
4. the activity that consists of breaking a job into its com- job safety analysis JSA
ponent tasks and then analyzing each step for poten-
tial hazards is called a?
5. a measure of the probability, consequences, and expo- Risk
sure related to an event is referred to as?
6. if there is a hole in the floor or a structure, the pre- be guarded with marked
ferred method of protecting workers from falls is to? flags or covered. (must be
clearly marked)
7. the D-ring or support point on a safety harness should between the shoulder
be placed? blades
8. a personal fall arrest system should be inspected competent person
monthly by a?
9. lanyards that have no shock-absorbing features are positioning and fall re-
used for? straint.
10. when placing a ladder against a platform or roof the 3 feet (0.9 m)
top of the ladder should be extended above the point
where the ladder touches the platform or roof by
atleast?
1/3
NCCER Module 1 (safety)
VerifiedStudySolutions,
online at https://quizlet.com/_8xbdhm
1. companies with strong safety cultures usually have incident and accident rates
lower?
2. what is a statement regarding safety? it's a learned behavior and
attitude
3. poor lighting, excessive noise, and inadequate guards unsafe conditions
for moving parts are examples of?
4. the activity that consists of breaking a job into its com- job safety analysis JSA
ponent tasks and then analyzing each step for poten-
tial hazards is called a?
5. a measure of the probability, consequences, and expo- Risk
sure related to an event is referred to as?
6. if there is a hole in the floor or a structure, the pre- be guarded with marked
ferred method of protecting workers from falls is to? flags or covered. (must be
clearly marked)
7. the D-ring or support point on a safety harness should between the shoulder
be placed? blades
8. a personal fall arrest system should be inspected competent person
monthly by a?
9. lanyards that have no shock-absorbing features are positioning and fall re-
used for? straint.
10. when placing a ladder against a platform or roof the 3 feet (0.9 m)
top of the ladder should be extended above the point
where the ladder touches the platform or roof by
atleast?
1/3
