CCNA 2 FINAL EXAM STUDY 100%
ACCURATE 2025
, Refer to the exhibit. Assuming that the routing tables are up to date and no ARP
messages are needed, after a packet leaves H1, how many times is the L2 header
rewritten in the path to H2? - ANSWER2
Refer to the exhibit. Which highlighted value represents a specific destination network in
the routing table? - ANSWER10.16.100.128
Which type of static route is configured with a greater administrative distance to provide
a backup route to a route learned from a dynamic routing protocol? - ANSWERfloating
static route
Refer to the exhibit. Which route was configured as a static route to a specific network
using the next-hop address? - ANSWERS 10.17.2.0/24 [1/0] via 10.16.2.2
What network prefix and prefix-length combination is used to create a default static
route that will match any IPv6 destination? - ANSWER::/0
A router has used the OSPF protocol to learn a route to the 172.16.32.0/19 network.
Which command will implement a backup floating static route to this network? -
ANSWERip route 172.16.32.0 255.255.224.0 S0/0/0 200
Refer to the exhibit. Currently router R1 uses an EIGRP route learned from Branch2 to
reach the 10.10.0.0/16 network. Which floating static route would create a backup route
to the 10.10.0.0/16 network in the event that the link between R1 and Branch2 goes
down? - ANSWERip route 10.10.0.0 255.255.0.0 209.165.200.225 100
Which statement describes a route that has been learned dynamically? - ANSWERIt is
automatically updated and maintained by routing protocols.
Compared with dynamic routes, what are two advantages of using static routes on a
router? (Choose two.) - ANSWERThey Improve network security
They use fewer router resources
To enable RIP routing for a specific subnet, the configuration command network
172.16.64.32 was entered by the network administrator. What address, if any, appears
in the running configuration file to identify this network? - ANSWER172.16.0.0
A network administrator adds the default-information originate command to the
configuration of a router that uses RIP as the routing protocol. What will result from
adding this command? - ANSWERThe router will propagate a static default route in its
RIP updates, if one is present.
ACCURATE 2025
, Refer to the exhibit. Assuming that the routing tables are up to date and no ARP
messages are needed, after a packet leaves H1, how many times is the L2 header
rewritten in the path to H2? - ANSWER2
Refer to the exhibit. Which highlighted value represents a specific destination network in
the routing table? - ANSWER10.16.100.128
Which type of static route is configured with a greater administrative distance to provide
a backup route to a route learned from a dynamic routing protocol? - ANSWERfloating
static route
Refer to the exhibit. Which route was configured as a static route to a specific network
using the next-hop address? - ANSWERS 10.17.2.0/24 [1/0] via 10.16.2.2
What network prefix and prefix-length combination is used to create a default static
route that will match any IPv6 destination? - ANSWER::/0
A router has used the OSPF protocol to learn a route to the 172.16.32.0/19 network.
Which command will implement a backup floating static route to this network? -
ANSWERip route 172.16.32.0 255.255.224.0 S0/0/0 200
Refer to the exhibit. Currently router R1 uses an EIGRP route learned from Branch2 to
reach the 10.10.0.0/16 network. Which floating static route would create a backup route
to the 10.10.0.0/16 network in the event that the link between R1 and Branch2 goes
down? - ANSWERip route 10.10.0.0 255.255.0.0 209.165.200.225 100
Which statement describes a route that has been learned dynamically? - ANSWERIt is
automatically updated and maintained by routing protocols.
Compared with dynamic routes, what are two advantages of using static routes on a
router? (Choose two.) - ANSWERThey Improve network security
They use fewer router resources
To enable RIP routing for a specific subnet, the configuration command network
172.16.64.32 was entered by the network administrator. What address, if any, appears
in the running configuration file to identify this network? - ANSWER172.16.0.0
A network administrator adds the default-information originate command to the
configuration of a router that uses RIP as the routing protocol. What will result from
adding this command? - ANSWERThe router will propagate a static default route in its
RIP updates, if one is present.
