Computer Networking Tutorials-Labs-Tips, Exam & Answers
for Student & Beginners
[Updated Constantly]
HERE
CCNA 3 (v5.0.3 + v6.0) Chapter 1 Exam Answers Full
1. What are two expected features of modern enterprise networks? (Choose two.)
support for converged network traffic*
support for distributed administrative control
support for 90 percent reliability
support for critical applications*
support for limited growth
All modern enterprise networks are expected to support critical applications, converged
network traffic, diverse business needs, and provide centralized administrative control.
Users expect enterprise networks to be up 99.999 percent of the time (not 90 percent.).
Support for limited growth is not a usual network design criterion.
2. Which type of information is displayed by the show ip protocols command that is issued
from a router command prompt?
the routed protocol that is enabled and the protocol status of interfaces
the configured routing protocols and the networks that the router is advertising*
interfaces with line (protocol) status and I/O statistics
interface information, including whether an ACL is enabled on the interface
The show ip protocols command displays information about the routing protocols that are
configured, the networks the router is advertising, and the default administrative distance.
The show interfaces command displays interfaces with line (protocol) status, bandwidth,
delay, reliability, encapsulation, duplex, and I/O statistics. The show ip interfaces command
displays interface information, including protocol status, the IP address, whether a helper
address is configured, and whether an ACL is enabled on the interface. The show protocols
command displays information about the routed protocol that is enabled and the protocol
status of interfaces.
3. Which action should be taken when planning for redundancy on a hierarchical network
design?
immediately replace a non-functioning module, service or device on a network
implement STP portfast between the switches on the network
continually purchase backup equipment for the network
add alternate physical paths for data to traverse the network*
One method of implementing redundancy is path redundancy, installing alternate physical
paths for data to traverse the network. Redundant links in a switched network supports high
availability and can be used for load balancing, reducing congestion on the network.
4. In the Cisco Enterprise Architecture, which two functional parts of the network are combined
to form a collapsed core design? (Choose two.)
distribution layer*
enterprise edge
access layer
https://itexamanswers.net/ccna-3-v5-0-3-v6-0-chapter-1-exam-answers-100-full.html
, Computer Networking Tutorials-Labs-Tips, Exam & Answers
for Student & Beginners
core layer*
provider edge
5. What are two ways to access a Cisco switch for out-of-band management? (Choose two.)
a connection that uses the AUX port*a connection that uses the AUX port*
a connection that uses HTTP
a connection that uses Telnet
a connection that uses the console port*
a connection that uses SSH
6. How can an enterprise network be designed to optimize bandwidth?
by installing devices with failover capabilities
by deploying a collapsed core model
by organizing the network to control traffic patterns*
by limiting the size of failure domains
7. Refer to the exhibit. Which devices exist in the failure domain when switch S3 loses power?
S4 and PC_2
PC_3 and AP_2*
AP_2 and AP_1
PC_3 and PC_2
S1 and S4
A failure domain is the area of a network that is impacted when a critical device such as
switch S3 has a failure or experiences problems.
8. As the network administrator you have been asked to implement EtherChannel on the
corporate network. What does this configuration consist of?
grouping multiple physical ports to increase bandwidth between two switches*
providing redundant links that dynamically block or forward traffic
grouping two devices to share a virtual IP address
https://itexamanswers.net/ccna-3-v5-0-3-v6-0-chapter-1-exam-answers-100-full.html
for Student & Beginners
[Updated Constantly]
HERE
CCNA 3 (v5.0.3 + v6.0) Chapter 1 Exam Answers Full
1. What are two expected features of modern enterprise networks? (Choose two.)
support for converged network traffic*
support for distributed administrative control
support for 90 percent reliability
support for critical applications*
support for limited growth
All modern enterprise networks are expected to support critical applications, converged
network traffic, diverse business needs, and provide centralized administrative control.
Users expect enterprise networks to be up 99.999 percent of the time (not 90 percent.).
Support for limited growth is not a usual network design criterion.
2. Which type of information is displayed by the show ip protocols command that is issued
from a router command prompt?
the routed protocol that is enabled and the protocol status of interfaces
the configured routing protocols and the networks that the router is advertising*
interfaces with line (protocol) status and I/O statistics
interface information, including whether an ACL is enabled on the interface
The show ip protocols command displays information about the routing protocols that are
configured, the networks the router is advertising, and the default administrative distance.
The show interfaces command displays interfaces with line (protocol) status, bandwidth,
delay, reliability, encapsulation, duplex, and I/O statistics. The show ip interfaces command
displays interface information, including protocol status, the IP address, whether a helper
address is configured, and whether an ACL is enabled on the interface. The show protocols
command displays information about the routed protocol that is enabled and the protocol
status of interfaces.
3. Which action should be taken when planning for redundancy on a hierarchical network
design?
immediately replace a non-functioning module, service or device on a network
implement STP portfast between the switches on the network
continually purchase backup equipment for the network
add alternate physical paths for data to traverse the network*
One method of implementing redundancy is path redundancy, installing alternate physical
paths for data to traverse the network. Redundant links in a switched network supports high
availability and can be used for load balancing, reducing congestion on the network.
4. In the Cisco Enterprise Architecture, which two functional parts of the network are combined
to form a collapsed core design? (Choose two.)
distribution layer*
enterprise edge
access layer
https://itexamanswers.net/ccna-3-v5-0-3-v6-0-chapter-1-exam-answers-100-full.html
, Computer Networking Tutorials-Labs-Tips, Exam & Answers
for Student & Beginners
core layer*
provider edge
5. What are two ways to access a Cisco switch for out-of-band management? (Choose two.)
a connection that uses the AUX port*a connection that uses the AUX port*
a connection that uses HTTP
a connection that uses Telnet
a connection that uses the console port*
a connection that uses SSH
6. How can an enterprise network be designed to optimize bandwidth?
by installing devices with failover capabilities
by deploying a collapsed core model
by organizing the network to control traffic patterns*
by limiting the size of failure domains
7. Refer to the exhibit. Which devices exist in the failure domain when switch S3 loses power?
S4 and PC_2
PC_3 and AP_2*
AP_2 and AP_1
PC_3 and PC_2
S1 and S4
A failure domain is the area of a network that is impacted when a critical device such as
switch S3 has a failure or experiences problems.
8. As the network administrator you have been asked to implement EtherChannel on the
corporate network. What does this configuration consist of?
grouping multiple physical ports to increase bandwidth between two switches*
providing redundant links that dynamically block or forward traffic
grouping two devices to share a virtual IP address
https://itexamanswers.net/ccna-3-v5-0-3-v6-0-chapter-1-exam-answers-100-full.html
