Advance Rigger Test
ADVANCE RIGGER TEST NEWEST 2025 EXAM COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+
What is the MAXIMUM percent of the rated capacity of a crane that can be used to lift
personnel?
a. 40%
b. 50%
c. 60%
d. 80% - ANSWER-b. 50%
When does lightening present the greatest hazard to the crane and rigging personnel?
a. When it is raining
b. When thunder and lightning are apparent
c. When the sky is cloudy
d. When a weather warning is announced - ANSWER-b. When thunder and lightning are
apparent
What force would be required to move an object up an inclined plane compared to lifting it
vertically?
a. Same
b. Less
c. 1 ½ times more
d. 2 times more - ANSWER-c. 1 ½ times more
Personnel platforms shall NOT be used to lift:
a. Employees
1|Page
, Advance Rigger Test
b. Tools with employees
c. Materials with employees
d. Tools and materials without employees - ANSWER-d. Tools and materials without employees
All of the following are reasons for stopping personnel lifting operations EXCEPT:
a. The A-2-B (anti-two-block) malfunctions
b. Dangerous weather is approaching
c. Radio communication fails
d. There are no tag lines - ANSWER-d. There are no tag lines
When working in close quarters, the main concern is:
a. Time
b. Speed
c. Safety
d. Efficiency - ANSWER-c. Safety
The point of any object's weight can be assumed to be concentrated at:
a. High point
b. Radius of gyration
c. Center of gravity
d. Center pin - ANSWER-c. Center of gravity
In a spur-gear chain hoist with a two chain system, the endless chain is used to:
a. Attach the load
b. Attach the hoist to the anchorage point
c. Raise and lower the load
2|Page
, Advance Rigger Test
d. Wrap around a bulky load - ANSWER-c. Raise and lower the load
In an emergency situation, what is the rigger's FIRST priority?
a. To prevent damage to equipment
b. To prevent injury or loss of life
c. To properly handle the media
d. To determine the responsible party - ANSWER-b. To prevent injury or loss of life
All of the following conditions exert dynamic loading on a crane EXCEPT:
a. Swinging
b. Adverse operating conditions
c. Static boom angle
d. Traveling - ANSWER-c. Static boom angle
Proper lead sheave placement as it relates to the hoisting drum location is:
a. The drum to hoist faster
b. Wires in rope to stay together
c. Proper spooling of wire rope
d. Precise hoisting - ANSWER-c. Proper spooling of wire rope
The MOST important information to consider when planning a lift is:
a. Weather
b. Weight of the load
c. Time of lift
d. Available rigging gear - ANSWER-b. Weight of the load
3|Page
ADVANCE RIGGER TEST NEWEST 2025 EXAM COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+
What is the MAXIMUM percent of the rated capacity of a crane that can be used to lift
personnel?
a. 40%
b. 50%
c. 60%
d. 80% - ANSWER-b. 50%
When does lightening present the greatest hazard to the crane and rigging personnel?
a. When it is raining
b. When thunder and lightning are apparent
c. When the sky is cloudy
d. When a weather warning is announced - ANSWER-b. When thunder and lightning are
apparent
What force would be required to move an object up an inclined plane compared to lifting it
vertically?
a. Same
b. Less
c. 1 ½ times more
d. 2 times more - ANSWER-c. 1 ½ times more
Personnel platforms shall NOT be used to lift:
a. Employees
1|Page
, Advance Rigger Test
b. Tools with employees
c. Materials with employees
d. Tools and materials without employees - ANSWER-d. Tools and materials without employees
All of the following are reasons for stopping personnel lifting operations EXCEPT:
a. The A-2-B (anti-two-block) malfunctions
b. Dangerous weather is approaching
c. Radio communication fails
d. There are no tag lines - ANSWER-d. There are no tag lines
When working in close quarters, the main concern is:
a. Time
b. Speed
c. Safety
d. Efficiency - ANSWER-c. Safety
The point of any object's weight can be assumed to be concentrated at:
a. High point
b. Radius of gyration
c. Center of gravity
d. Center pin - ANSWER-c. Center of gravity
In a spur-gear chain hoist with a two chain system, the endless chain is used to:
a. Attach the load
b. Attach the hoist to the anchorage point
c. Raise and lower the load
2|Page
, Advance Rigger Test
d. Wrap around a bulky load - ANSWER-c. Raise and lower the load
In an emergency situation, what is the rigger's FIRST priority?
a. To prevent damage to equipment
b. To prevent injury or loss of life
c. To properly handle the media
d. To determine the responsible party - ANSWER-b. To prevent injury or loss of life
All of the following conditions exert dynamic loading on a crane EXCEPT:
a. Swinging
b. Adverse operating conditions
c. Static boom angle
d. Traveling - ANSWER-c. Static boom angle
Proper lead sheave placement as it relates to the hoisting drum location is:
a. The drum to hoist faster
b. Wires in rope to stay together
c. Proper spooling of wire rope
d. Precise hoisting - ANSWER-c. Proper spooling of wire rope
The MOST important information to consider when planning a lift is:
a. Weather
b. Weight of the load
c. Time of lift
d. Available rigging gear - ANSWER-b. Weight of the load
3|Page
