1|Page
TCFP Driver Operator Masterclass Exam and Practice
Exam Latest 2025 Test Bank| Complete 900 Actual Exam
Questions and Correct Detailed Answers (Verified Answers)
Already Graded A+|| New!!
Which type of strainer is used for clean, shallow water sources?
A. Floating strainer
B. Pipe strainer
C. Barrel strainer
D. Low-level strainer - -answer: D
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 335
Which type of strainer is designed to operate below the surface scum
and above the weeds, dirt, and silt in the water source?
A. Floating strainer
B. Pipe strainer
C. Barrel strainer
D. Low-level strainer - -answer: A
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 336
Which type of strainer requires 24 inches (0.5 m) of water in all
directions around the strainer?
pg. 1
,2|Page
A. Floating strainer
B. Pipe strainer
C. Barrel strainer
D. Low-level strainer - -answer: C
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 336
What is the minimum water depth required to draft utilizing low-level
and floating strainers?
A. 12 inches (0.3 m)
B. 24 inches (0.5 m)
C. 36 inches (0.9 m)
D. 48 inches (1.2 m) - -answer: B
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 336
What term refers to a small-diameter hose that remains in the open
position and continues flowing water during the entire drafting
operation?
A. Flow line
B. Attack line
C. Dump line
D. Hard suction line - -answer: C
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
pg. 2
,3|Page
Page: 340
What type of tanker operation does not require the use of portable tanks,
but consists of offloading water from a tanker into a pumper?
A. Relay pumping tanker
B. Portable tanker
C. Nurse tender
D. Attack tanker - -answer: C
NFPA 1002 : 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 355
The process of transferring the supply of water from the internal
apparatus water tank to an external source is known as a(n):
A. changeover operation.
B. dynamic conversion.
C. transfer operation.
D. intake conversion. - -answer: A
NFPA 1002: 4.3.7, 4.3.7(A), 5.2.4(1), 5.2.4(2), 5.2.4(3), 5.2.4(4),
5.2.4(A)
Page: 290
What should the driver/operator do if the fire apparatus does not go into
the "pump" position after completing the correct procedures?
A. Manually shift the pump gear.
pg. 3
, 4|Page
B. Force the transmission into third gear.
C. Reset the parking brake.
D. Reverse the procedure to take the fire apparatus out of "pump" gear
and start again. - -answer: D
NFPA 1002: 4.3.7, 4.3.7(A), 5.2.4(1), 5.2.4(2), 5.2.4(3), 5.2.4(4),
5.2.4(A)
Page: 292
If drafting with a two-staged pump, it is recommended that the pump be
in the ___________ stage before beginning any drafting operations.
A. pressure
B. series
C. drafting
D. volume - -answer: D
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 340
When providing water to the operation for the purpose of master streams
from a static water source, the transfer valve in a two-stage pump should
be in the__________ position.
A. pressure
B. volume
C. straight
D. on - -answer: B
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
pg. 4
TCFP Driver Operator Masterclass Exam and Practice
Exam Latest 2025 Test Bank| Complete 900 Actual Exam
Questions and Correct Detailed Answers (Verified Answers)
Already Graded A+|| New!!
Which type of strainer is used for clean, shallow water sources?
A. Floating strainer
B. Pipe strainer
C. Barrel strainer
D. Low-level strainer - -answer: D
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 335
Which type of strainer is designed to operate below the surface scum
and above the weeds, dirt, and silt in the water source?
A. Floating strainer
B. Pipe strainer
C. Barrel strainer
D. Low-level strainer - -answer: A
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 336
Which type of strainer requires 24 inches (0.5 m) of water in all
directions around the strainer?
pg. 1
,2|Page
A. Floating strainer
B. Pipe strainer
C. Barrel strainer
D. Low-level strainer - -answer: C
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 336
What is the minimum water depth required to draft utilizing low-level
and floating strainers?
A. 12 inches (0.3 m)
B. 24 inches (0.5 m)
C. 36 inches (0.9 m)
D. 48 inches (1.2 m) - -answer: B
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 336
What term refers to a small-diameter hose that remains in the open
position and continues flowing water during the entire drafting
operation?
A. Flow line
B. Attack line
C. Dump line
D. Hard suction line - -answer: C
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
pg. 2
,3|Page
Page: 340
What type of tanker operation does not require the use of portable tanks,
but consists of offloading water from a tanker into a pumper?
A. Relay pumping tanker
B. Portable tanker
C. Nurse tender
D. Attack tanker - -answer: C
NFPA 1002 : 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 355
The process of transferring the supply of water from the internal
apparatus water tank to an external source is known as a(n):
A. changeover operation.
B. dynamic conversion.
C. transfer operation.
D. intake conversion. - -answer: A
NFPA 1002: 4.3.7, 4.3.7(A), 5.2.4(1), 5.2.4(2), 5.2.4(3), 5.2.4(4),
5.2.4(A)
Page: 290
What should the driver/operator do if the fire apparatus does not go into
the "pump" position after completing the correct procedures?
A. Manually shift the pump gear.
pg. 3
, 4|Page
B. Force the transmission into third gear.
C. Reset the parking brake.
D. Reverse the procedure to take the fire apparatus out of "pump" gear
and start again. - -answer: D
NFPA 1002: 4.3.7, 4.3.7(A), 5.2.4(1), 5.2.4(2), 5.2.4(3), 5.2.4(4),
5.2.4(A)
Page: 292
If drafting with a two-staged pump, it is recommended that the pump be
in the ___________ stage before beginning any drafting operations.
A. pressure
B. series
C. drafting
D. volume - -answer: D
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
Page: 340
When providing water to the operation for the purpose of master streams
from a static water source, the transfer valve in a two-stage pump should
be in the__________ position.
A. pressure
B. volume
C. straight
D. on - -answer: B
NFPA 1002: 10.2.1, 10.2.1(A), 10.2.2, 10.2.2(A)
pg. 4
