Structured Cabling Chapters 1 - 17 Test
2025/2026 Exam Questions and Correct
Answers | New Update
Which of the following standards or standards bodies covers the standard for the
design of commercial buildings in the US? - 🧠 ANSWER ✔✔ANSI/TIA-568-C
Which types of category UTP cabling is designed for use with 10GBase-T
applications? - 🧠 ANSWER ✔✔Cat 6A
The following type of shielded twisted pair cabling __________ contains four
individually shielded pairs of 24 AWG, 100 ohm wire surrounded by an outer
metal shielding. - 🧠 ANSWER ✔✔S/STP or S/FTP
Unlike riser cabling, Plenum cables are designed with special compounds that don't
produce toxic gases when they burn. True/False - 🧠 ANSWER ✔✔False
The following type of crosstalk measures the interference between cable: - 🧠
ANSWER ✔✔AXT (Alien crosstalk)
The NEC is published every ________ years. - 🧠 ANSWER ✔✔3
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, The ANSI/TIA-568-C.1 standard breaks structured cabling into six areas.
True/False - 🧠 ANSWER ✔✔True
Horizontal cabling extends from horizontal cross-connect, intermediate cross-
connect, or main cross-connect to the work area and terminates in
telecommunications outlets. True/False - 🧠 ANSWER ✔✔True
ANSI/TIA-568-C.1 specifies that each work area shall have a minimum of
__________ information-outlet ports. - 🧠 ANSWER ✔✔2
The work area is where the backbone cable terminates at the wall outlet.
True/False - 🧠 ANSWER ✔✔False
The ____ ____ defined by ANSI/TIA-568-C.1 specifies the point in the building
where cabling interfaces with the outside world. - 🧠 ANSWER ✔✔entrance facility
________ optical fiber is most often used as backbone cable inside a building and
for horizontal cabling. - 🧠 ANSWER ✔✔Multi-mode
_______ optical fiber cable is commonly used as backbone cabling outside the
building. - 🧠 ANSWER ✔✔Single
The entrance facility is usually located either on the first floor or in the basement
of a building. True/False - 🧠 ANSWER ✔✔True
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED
2025/2026 Exam Questions and Correct
Answers | New Update
Which of the following standards or standards bodies covers the standard for the
design of commercial buildings in the US? - 🧠 ANSWER ✔✔ANSI/TIA-568-C
Which types of category UTP cabling is designed for use with 10GBase-T
applications? - 🧠 ANSWER ✔✔Cat 6A
The following type of shielded twisted pair cabling __________ contains four
individually shielded pairs of 24 AWG, 100 ohm wire surrounded by an outer
metal shielding. - 🧠 ANSWER ✔✔S/STP or S/FTP
Unlike riser cabling, Plenum cables are designed with special compounds that don't
produce toxic gases when they burn. True/False - 🧠 ANSWER ✔✔False
The following type of crosstalk measures the interference between cable: - 🧠
ANSWER ✔✔AXT (Alien crosstalk)
The NEC is published every ________ years. - 🧠 ANSWER ✔✔3
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, The ANSI/TIA-568-C.1 standard breaks structured cabling into six areas.
True/False - 🧠 ANSWER ✔✔True
Horizontal cabling extends from horizontal cross-connect, intermediate cross-
connect, or main cross-connect to the work area and terminates in
telecommunications outlets. True/False - 🧠 ANSWER ✔✔True
ANSI/TIA-568-C.1 specifies that each work area shall have a minimum of
__________ information-outlet ports. - 🧠 ANSWER ✔✔2
The work area is where the backbone cable terminates at the wall outlet.
True/False - 🧠 ANSWER ✔✔False
The ____ ____ defined by ANSI/TIA-568-C.1 specifies the point in the building
where cabling interfaces with the outside world. - 🧠 ANSWER ✔✔entrance facility
________ optical fiber is most often used as backbone cable inside a building and
for horizontal cabling. - 🧠 ANSWER ✔✔Multi-mode
_______ optical fiber cable is commonly used as backbone cabling outside the
building. - 🧠 ANSWER ✔✔Single
The entrance facility is usually located either on the first floor or in the basement
of a building. True/False - 🧠 ANSWER ✔✔True
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED
