WGU Comptia Verified Multiple Choice and
Conceptual Actual Exam Questions With
Reviewed 100% Correct Detailed Answers
Guaranteed Pass!!Current Update
1. Windows can create partitions using the _______________ disk.
Select one:
a. basic
b. extended
c. volume
d. system - ANSWER a. basic
You might see the terms basic partition and dynamic partition on the CompTIA
A+ 1002 exam. These mean, logically, volumes partitioned as basic disks or
dynamic disks, respectively.
2. When using primary partitions, how many drive letters are possible on a
single MBR disk?
Select one:
a. One
b. Four
c. Five
d. Twenty-six - ANSWER b. Four
3. MBR master boot record
,What type of problem does the error message "No Boot Device Present"
indicate?
Select one:
a. The boot file is missing or corrupted.
b. The hard drive containing the operating system has died.
c. The FAT has been corrupted.
d. The active partition has failed. - ANSWER b. The hard drive
containing the operating system has died.
4. To change a basic disk to dynamic, right-click the drive icon and select
_______________.
Select one:
a. Format as Dynamic
b. Partition as Dynamic
c. Convert to Dynamic Disk
d. New Volume - ANSWER c. Convert to Dynamic Disk
5. In Windows, each _______________ is assigned a drive letter from C: to Z:.
Select one:
a. cylinder
b. file
c. sector
d. partition - ANSWER d. partition
6. A surge suppressor should have a rating of at least _______________.
Select one:
, a. 330-V
b. 400-V
c. 800-V
d. 1449-V - ANSWER a. 330-V
7. The notches that guide installation in the Molex connector are called
_______________.
Select one:
a. chamfers
b. channels
c. ports
d. sockets - ANSWER a. chamfers
8. Which connector is the most common type of connector used for devices
that require 5 V or 12 V of power?
Select one:
a. Molex
b. P1
c. P4 12 V
d. sub-mini connector - ANSWER a. Molex
9. How is DC voltage represented on multimeters?
Select one:
a. V with a ~ below it
b. V with a dash below it
c. V with a ~ above it
Conceptual Actual Exam Questions With
Reviewed 100% Correct Detailed Answers
Guaranteed Pass!!Current Update
1. Windows can create partitions using the _______________ disk.
Select one:
a. basic
b. extended
c. volume
d. system - ANSWER a. basic
You might see the terms basic partition and dynamic partition on the CompTIA
A+ 1002 exam. These mean, logically, volumes partitioned as basic disks or
dynamic disks, respectively.
2. When using primary partitions, how many drive letters are possible on a
single MBR disk?
Select one:
a. One
b. Four
c. Five
d. Twenty-six - ANSWER b. Four
3. MBR master boot record
,What type of problem does the error message "No Boot Device Present"
indicate?
Select one:
a. The boot file is missing or corrupted.
b. The hard drive containing the operating system has died.
c. The FAT has been corrupted.
d. The active partition has failed. - ANSWER b. The hard drive
containing the operating system has died.
4. To change a basic disk to dynamic, right-click the drive icon and select
_______________.
Select one:
a. Format as Dynamic
b. Partition as Dynamic
c. Convert to Dynamic Disk
d. New Volume - ANSWER c. Convert to Dynamic Disk
5. In Windows, each _______________ is assigned a drive letter from C: to Z:.
Select one:
a. cylinder
b. file
c. sector
d. partition - ANSWER d. partition
6. A surge suppressor should have a rating of at least _______________.
Select one:
, a. 330-V
b. 400-V
c. 800-V
d. 1449-V - ANSWER a. 330-V
7. The notches that guide installation in the Molex connector are called
_______________.
Select one:
a. chamfers
b. channels
c. ports
d. sockets - ANSWER a. chamfers
8. Which connector is the most common type of connector used for devices
that require 5 V or 12 V of power?
Select one:
a. Molex
b. P1
c. P4 12 V
d. sub-mini connector - ANSWER a. Molex
9. How is DC voltage represented on multimeters?
Select one:
a. V with a ~ below it
b. V with a dash below it
c. V with a ~ above it
