TKA 2.0 EXAM (ACTUAL 2025-2026) QUESTION
WITH CORRECT VERIFIED ANSWERS GRADED
A+.
True notching' can be described as the superior edge of
anterior cut haptic model violating bone surface. -
ANSWERS_True
In the image shown, which notification is displayed on the
main window? - ANSWERS_Femur planning
Alignment
Laxity
Joint line
In the image shown, which notification has been triggered on
the main window? - ANSWERS_No mentioned answer
choices
Laxity
Tibia planning
All mentioned answer choices
Femur planning
The user is limited to using the standard sawblade for implant
sizes 3-8. - ANSWERS_False
Which of the following steps is not included in Mako Park? -
ANSWERS_Angle of Robotic System
, TKA 2.0 EXAM (ACTUAL 2024-2025) QUESTION
WITH CORRECT VERIFIED ANSWERS GRADED
A+.
Consider the following scenario. The surgeon user has chosen
the mid-resection workflow and has executed both the distal
and tibial resections. The user moves forward with updating
the implant plan based on the 'Tensioning' pose captures.
Which pre-set anchor position should the user select to
increase the valgus angle on the distal cut without triggering
the 'implant proud of cut' warning? - ANSWERS_F1- in line
and off distal medial resection
For tibia intra-incisional pins, the surgeon can utilize the long
or short stabilizers. However, if using the long stabilizer, 140
mm pins are recommended and when using the short
stabilizer, 110 mm pins are recommended. - ANSWERS_True
The user may need to 'zero' during trialing for the following
reasons: - ANSWERS_If the femur is articulating in the
sulcus of the tibia and anything other than zero is displayed
The TKA 1.0 concept of "adding bone" can be compared to
which warning? - ANSWERS_Implant proud of cut
The tibial coordinate system is defined by medial malleolus,
lateral malleolus, rotational landmark, tibia knee center,
medial slope, and lateral slope. (False works but does not
make sense) - ANSWERS_False
, TKA 2.0 EXAM (ACTUAL 2024-2025) QUESTION
WITH CORRECT VERIFIED ANSWERS GRADED
A+.
In the image shown, which notification is displayed on the
main window? - ANSWERS_AlignmentTibia
planning (alignment)
LaxityTibia
planning (resection)
If the user prefers intra-incisional bone pins on the tibia, what
consideration(s) should be made? - ANSWERS_Resection
view, ensure resection depths are appropriate
Consider the following scenario. The user has modified the
implant plan based on the laxity pose captures. No warnings
are indicated on the main window or information box. What
should the user check before proceeding to bone preparation?
- ANSWERS_Resection view, ensure resection depths are
appropriate
If the implant plan has triggered the 'checkpoint near cut'
warning the checkpoint will be displayed as __________ on
the main window bone model __________. -
ANSWERS_Yellow, while on the cut, the checkpoint may
interact with the cutter
WITH CORRECT VERIFIED ANSWERS GRADED
A+.
True notching' can be described as the superior edge of
anterior cut haptic model violating bone surface. -
ANSWERS_True
In the image shown, which notification is displayed on the
main window? - ANSWERS_Femur planning
Alignment
Laxity
Joint line
In the image shown, which notification has been triggered on
the main window? - ANSWERS_No mentioned answer
choices
Laxity
Tibia planning
All mentioned answer choices
Femur planning
The user is limited to using the standard sawblade for implant
sizes 3-8. - ANSWERS_False
Which of the following steps is not included in Mako Park? -
ANSWERS_Angle of Robotic System
, TKA 2.0 EXAM (ACTUAL 2024-2025) QUESTION
WITH CORRECT VERIFIED ANSWERS GRADED
A+.
Consider the following scenario. The surgeon user has chosen
the mid-resection workflow and has executed both the distal
and tibial resections. The user moves forward with updating
the implant plan based on the 'Tensioning' pose captures.
Which pre-set anchor position should the user select to
increase the valgus angle on the distal cut without triggering
the 'implant proud of cut' warning? - ANSWERS_F1- in line
and off distal medial resection
For tibia intra-incisional pins, the surgeon can utilize the long
or short stabilizers. However, if using the long stabilizer, 140
mm pins are recommended and when using the short
stabilizer, 110 mm pins are recommended. - ANSWERS_True
The user may need to 'zero' during trialing for the following
reasons: - ANSWERS_If the femur is articulating in the
sulcus of the tibia and anything other than zero is displayed
The TKA 1.0 concept of "adding bone" can be compared to
which warning? - ANSWERS_Implant proud of cut
The tibial coordinate system is defined by medial malleolus,
lateral malleolus, rotational landmark, tibia knee center,
medial slope, and lateral slope. (False works but does not
make sense) - ANSWERS_False
, TKA 2.0 EXAM (ACTUAL 2024-2025) QUESTION
WITH CORRECT VERIFIED ANSWERS GRADED
A+.
In the image shown, which notification is displayed on the
main window? - ANSWERS_AlignmentTibia
planning (alignment)
LaxityTibia
planning (resection)
If the user prefers intra-incisional bone pins on the tibia, what
consideration(s) should be made? - ANSWERS_Resection
view, ensure resection depths are appropriate
Consider the following scenario. The user has modified the
implant plan based on the laxity pose captures. No warnings
are indicated on the main window or information box. What
should the user check before proceeding to bone preparation?
- ANSWERS_Resection view, ensure resection depths are
appropriate
If the implant plan has triggered the 'checkpoint near cut'
warning the checkpoint will be displayed as __________ on
the main window bone model __________. -
ANSWERS_Yellow, while on the cut, the checkpoint may
interact with the cutter
