BICSI IN101, V8.0 Day 2 - 2023
Save
Students also studied
Flashcard sets Study guides
Chapter 1-3 lifetime fitness ATI Pharm made easy 4.0 Cardiovas... NSCA CSCS
51 terms Teacher 25 terms 256 terms
Preview carolynekoech001 Preview Maggie_Mwai
An elevated walkway provided in some buildings to help workers
Catwalk
reach utility spaces.
Are large enough and configured so that an employee can
physically enter and perform assigned work; has limited or
Confined Spaces
restrictive means for entry or exit; is not designed for continuous
employee occupancy.
Abbreviation of safety data sheet. A document prepared by the
SDS manufacturer describing all known chemical, radiological, and
other hazards of a specific product.
caught in/ caught between When an injury is the result of pressure or crushing.
CPR Abbreviation of cardiopulmonary resuscitation.
Acronym for hazardous material. A substance which, by reason
of being explosive, flammable, poisonous, corrosive, oxidizing,
HAZMAT
irritating, or otherwise harmful, is likely to cause death or injury.
(OSHA)
Acronym for the Occupational Safety and Health Administration.
Part of the U.S.Department of Labor, OSHA was created to
OSHA assure safe and healthful working conditions by setting and
enforcing standards and by providing training, outreach,
education, and assistance.(OSHA).
Abbreviation of personal protective equipment. Any number of
safety apparatuses worn or used by an individual (e.g., hard hat,
PPE
protective eyewear, gloves, clothing) that shield against possible
injury while performing tasks.
TOXIN A poisonous substance
Which is unlikely to be a hazard C
of confined spaces?
Combustible dust, contact with sharp objects, and unsafe
A. Combustible dust oxygen levels are specific to confined spaces. The danger of
B. Flammable gas electrocution is not inherent in a confined space.
C. Electrocution
D. Unsafe oxygen levels
, Chemical hazards can present B&D
multiple threats. Select all the
dangers that may result from The vapors from chemicals can overwhelm the user. Chemical
working with chemicals. vapors are highly flammable and combustible.
A. Combustible dust
B. High flammability
C. Contact with objects
D. Toxic fumes
Identify a best practice specific B
to the usage of tools on site.
Examine both hand and power tools regularly to ensure they are
in safe working condition.
A. Be sure to properly section
off the work area when using
tools.
B. Inspect tools regularly.
C. Use breaks to secure the
position of tools as they are
being used.
D. You may use tools in ways
you deem fit.
Whats the formula used for A.
extension ladders to be set at
the proper pitch (angle)? (25%) Example: An extension ladder contacting the support wall
at a height of 20 ft. would have its base 5 ft. from the wall.
A. X/4
B. X/5 X/4 = 20/4 = 5ft.
C. X/6
D. X/2
Extension ladders should always B
overlap between sections by at
least three rungs. Both side rails Should extend up to the work area and =0.91 m (3 ft) above
of the ladder must be supported roofline, catwalks, or lofts (see Figure 3.8). This allows the
at the top, and the top of the installer to safely mount or dismount the steps when getting back
ladder should extend up to how onto the ladder from the roofline, catwalk, or loft. Lash ladders
many feet above the roofline, to anchors if the ladder will be used for an extended period.
catwalks, or lofts?
A. 4 Ft
B. 3 Ft
C. 5 Ft
D. 6 Ft.
An AP is a company that provides a physical (copper or optical
Access Provider (AP)
fiber cabling) or wireless circuit path to the site.
Conduit A pipe or tube through which cable travels.
A point here the operation control or ownership changes. The
Demarcation Point point of interface between service providers and customer
facilities.
Save
Students also studied
Flashcard sets Study guides
Chapter 1-3 lifetime fitness ATI Pharm made easy 4.0 Cardiovas... NSCA CSCS
51 terms Teacher 25 terms 256 terms
Preview carolynekoech001 Preview Maggie_Mwai
An elevated walkway provided in some buildings to help workers
Catwalk
reach utility spaces.
Are large enough and configured so that an employee can
physically enter and perform assigned work; has limited or
Confined Spaces
restrictive means for entry or exit; is not designed for continuous
employee occupancy.
Abbreviation of safety data sheet. A document prepared by the
SDS manufacturer describing all known chemical, radiological, and
other hazards of a specific product.
caught in/ caught between When an injury is the result of pressure or crushing.
CPR Abbreviation of cardiopulmonary resuscitation.
Acronym for hazardous material. A substance which, by reason
of being explosive, flammable, poisonous, corrosive, oxidizing,
HAZMAT
irritating, or otherwise harmful, is likely to cause death or injury.
(OSHA)
Acronym for the Occupational Safety and Health Administration.
Part of the U.S.Department of Labor, OSHA was created to
OSHA assure safe and healthful working conditions by setting and
enforcing standards and by providing training, outreach,
education, and assistance.(OSHA).
Abbreviation of personal protective equipment. Any number of
safety apparatuses worn or used by an individual (e.g., hard hat,
PPE
protective eyewear, gloves, clothing) that shield against possible
injury while performing tasks.
TOXIN A poisonous substance
Which is unlikely to be a hazard C
of confined spaces?
Combustible dust, contact with sharp objects, and unsafe
A. Combustible dust oxygen levels are specific to confined spaces. The danger of
B. Flammable gas electrocution is not inherent in a confined space.
C. Electrocution
D. Unsafe oxygen levels
, Chemical hazards can present B&D
multiple threats. Select all the
dangers that may result from The vapors from chemicals can overwhelm the user. Chemical
working with chemicals. vapors are highly flammable and combustible.
A. Combustible dust
B. High flammability
C. Contact with objects
D. Toxic fumes
Identify a best practice specific B
to the usage of tools on site.
Examine both hand and power tools regularly to ensure they are
in safe working condition.
A. Be sure to properly section
off the work area when using
tools.
B. Inspect tools regularly.
C. Use breaks to secure the
position of tools as they are
being used.
D. You may use tools in ways
you deem fit.
Whats the formula used for A.
extension ladders to be set at
the proper pitch (angle)? (25%) Example: An extension ladder contacting the support wall
at a height of 20 ft. would have its base 5 ft. from the wall.
A. X/4
B. X/5 X/4 = 20/4 = 5ft.
C. X/6
D. X/2
Extension ladders should always B
overlap between sections by at
least three rungs. Both side rails Should extend up to the work area and =0.91 m (3 ft) above
of the ladder must be supported roofline, catwalks, or lofts (see Figure 3.8). This allows the
at the top, and the top of the installer to safely mount or dismount the steps when getting back
ladder should extend up to how onto the ladder from the roofline, catwalk, or loft. Lash ladders
many feet above the roofline, to anchors if the ladder will be used for an extended period.
catwalks, or lofts?
A. 4 Ft
B. 3 Ft
C. 5 Ft
D. 6 Ft.
An AP is a company that provides a physical (copper or optical
Access Provider (AP)
fiber cabling) or wireless circuit path to the site.
Conduit A pipe or tube through which cable travels.
A point here the operation control or ownership changes. The
Demarcation Point point of interface between service providers and customer
facilities.
