Science Engineering Civil Engineering
CSX- Freight Conductor final
Save
Students also studied
Flashcard sets Study guides
CSX- Freight Conductor final CSX Freight Conductor Final Exam NCCCO MOBILE CR
168 terms Teacher 168 terms Teacher 99 terms
Preview Muia_Son8 Preview SIRANTOS
202.2- What's the indication Proceed
when a flag, hand or lantern
signal has raised or lowered
vertically
6104- Your key train has arrived CT-168
at Midway Yard to make a pickup
of 20 cars. You will place those
cars at the lead end of the train.
After adding the cars to the train
and making the appropriate
brake test, what documents
must be updated before
departing?
4509.1- T/F True
When handling 1 or more
clearance implicated shipments
in your train is the follow
statement True or False?
Do not enter a yard terminal
where a yard master on duty,
until you tell the yard master of
the shipment.
4505.1- When handling a train Clearance bureau instructions
with one or more clearance
implicated shipments, what
instructions must be included as
part of your CXT train
documents if the shipment was
not authorized verbally?
, 301.2- Your train is authorized on Crew members direct the locomotive operator to slow the train
the Atlanta subdivision at to the authorized speed
50mph. While descending the
grade, you exceed the speed on
a grade to 53mph. What action
is required? (Your speeding by 3
mph)
1) Crew members direct the locomotive operators to stop the
301.2- Your speeding by 7 mph.
train immediately and report the occurrence to the proper
What do you do?
authority
(2 Answer)
2) Must not proceed unit released
401.3- Rolling equipment must 1) Switches and derails connected with the movement are
not foul the track until it can properly lined
visually be determine that?
2) The attend route is clear
(2 Answer)
407.1- You been instructed by 1) Standing outside the rail off the end of the cross top of the
the yard master to leave cars in connected track extend arm toward equipment
track 14. Where clearance points
are not identified or visible. 2) Position equipment an additional 50ft in the track beyond the
Identify steps required to location where it can not longer be touched
determine the clearance point.
(2 Answers)
401.8- T/F 1) False
After operating a switch or 2) False
derail the employee must make
certain that the switch is 3) True
properly lined and the switch
point fits properly. What else is 4) True
true?
1) It is equipped with a reflective
marking on the handle?
2) It is at least 100ft from a road
crossing?
3) The lever is latched?
4) Device is locked if it's
equipped with a lock
406.8- When shoving for 1) Improperly lined switch
purpose other then making a
coupling. You must stop 150ft 2) Derail
short of a?
(2 Answers)
CSX- Freight Conductor final
Save
Students also studied
Flashcard sets Study guides
CSX- Freight Conductor final CSX Freight Conductor Final Exam NCCCO MOBILE CR
168 terms Teacher 168 terms Teacher 99 terms
Preview Muia_Son8 Preview SIRANTOS
202.2- What's the indication Proceed
when a flag, hand or lantern
signal has raised or lowered
vertically
6104- Your key train has arrived CT-168
at Midway Yard to make a pickup
of 20 cars. You will place those
cars at the lead end of the train.
After adding the cars to the train
and making the appropriate
brake test, what documents
must be updated before
departing?
4509.1- T/F True
When handling 1 or more
clearance implicated shipments
in your train is the follow
statement True or False?
Do not enter a yard terminal
where a yard master on duty,
until you tell the yard master of
the shipment.
4505.1- When handling a train Clearance bureau instructions
with one or more clearance
implicated shipments, what
instructions must be included as
part of your CXT train
documents if the shipment was
not authorized verbally?
, 301.2- Your train is authorized on Crew members direct the locomotive operator to slow the train
the Atlanta subdivision at to the authorized speed
50mph. While descending the
grade, you exceed the speed on
a grade to 53mph. What action
is required? (Your speeding by 3
mph)
1) Crew members direct the locomotive operators to stop the
301.2- Your speeding by 7 mph.
train immediately and report the occurrence to the proper
What do you do?
authority
(2 Answer)
2) Must not proceed unit released
401.3- Rolling equipment must 1) Switches and derails connected with the movement are
not foul the track until it can properly lined
visually be determine that?
2) The attend route is clear
(2 Answer)
407.1- You been instructed by 1) Standing outside the rail off the end of the cross top of the
the yard master to leave cars in connected track extend arm toward equipment
track 14. Where clearance points
are not identified or visible. 2) Position equipment an additional 50ft in the track beyond the
Identify steps required to location where it can not longer be touched
determine the clearance point.
(2 Answers)
401.8- T/F 1) False
After operating a switch or 2) False
derail the employee must make
certain that the switch is 3) True
properly lined and the switch
point fits properly. What else is 4) True
true?
1) It is equipped with a reflective
marking on the handle?
2) It is at least 100ft from a road
crossing?
3) The lever is latched?
4) Device is locked if it's
equipped with a lock
406.8- When shoving for 1) Improperly lined switch
purpose other then making a
coupling. You must stop 150ft 2) Derail
short of a?
(2 Answers)
