NASAR SARTECH Verified Multiple Choice and
Conceptual Actual Emended Exam Questions
With Reviewed 100% Correct Detailed Answers
Guaranteed Pass!!Current Update
1. What is the primary purpose of a cable grip in helicopter rescue operations?
A. To connect the hoist to a winch
B. To secure a litter to the floor
C. To attach a safety belt in case of hoist failure
D. To extend the cable length
2. What is the rated supporting strength of the cable grip?
A. 500 lbs
B. 1000 lbs
C. 1500 lbs
D. 2000 lbs
3. What is the purpose of the Multi-place Liferaft (MPLR) weak link?
A. Ensures safe deployment of liferafts when dropped to survivors
B. Anchors the MPLR in shallow water
C. Secures the raft to the aircraft
D. Detects water salinity before inflation
4. Where should the weak link be stored when not in use?
A. Under the raft inflation panel
, B. Inside the cable grip pocket
C. Next to the rescue hook
D. With the raft inflation hose
5. What is the correct finished length of the weak link?
A. 2 inches ± ½ inch
B. 3 inches ± ½ inch
C. 4 inches exactly
D. 3.5 inches ± 1 inch
6. How many Double Rescue Hooks are typically available in a standard aircraft
hoist system?
A. Two
B. One
C. Three
D. Four
7. What is the primary function of the Double Rescue Hook?
A. Secure winch cable
B. Connect personnel/equipment to the hoist
C. Unlock the quick splice
D. Attach the raft to the floor
8. What is the load rating of the large spring-loaded gate on the Double Rescue
Hook?
A. 3000 lbs
B. 2500 lbs
C. 2000 lbs
D. 1000 lbs
,9. What is the load capacity of the small spring-loaded gate?
A. 750 lbs
B. 1000 lbs
C. 1500 lbs
D. 3000 lbs
10. What is the load limit of the bottom ring of the Double Rescue Hook?
A. 1000 lbs
B. 1500 lbs
C. 2000 lbs
D. 3000 lbs
11. What is the function of the Hoist Quick Splice?
A. Shorten the hoist cable
B. Serve as a backup in case of cable failure
C. Automatically deploy the MPLR
D. Secure the cockpit door during rescue
12. What are the load test parameters for the Hoist Quick Splice?
A. 1000 lbs ± 100 lbs for 10 minutes
B. 1500 lbs for 5 minutes
C. 800 lbs for 15 minutes
D. 2000 lbs for 2 minutes
13. True or False:
Cable Splice is an approved alternate to the Hoist Quick Splice.
True
, 14. What is applied to the Cable Splice shackle pin to ensure tamper evidence?
A. Tamper dot
B. Cable tie
C. Safety seal
D. Tape marker
15. How many clicks must be heard to confirm the self-locking feature on the
Shackle Pin is engaged?
A. One
B. Two
C. Three
D. Four
16. What type of locking mechanism is used on the Shackle Pin in the cable
splice?
A. Spring tension pin
B. Self-locking mechanism
C. Twist-and-lock gate
D. Carabiner-style clip
17. What action should be taken immediately after using the Hoist Quick Splice
during a rescue?
A. Report the incident and document the use
B. Retighten the splice for reuse
C. Continue using the same setup for the next lift
D. Disconnect the MPLR immediately
18. What is the maximum load rating of a certified rescue hoist cable used in
military helicopters (standard)?
Conceptual Actual Emended Exam Questions
With Reviewed 100% Correct Detailed Answers
Guaranteed Pass!!Current Update
1. What is the primary purpose of a cable grip in helicopter rescue operations?
A. To connect the hoist to a winch
B. To secure a litter to the floor
C. To attach a safety belt in case of hoist failure
D. To extend the cable length
2. What is the rated supporting strength of the cable grip?
A. 500 lbs
B. 1000 lbs
C. 1500 lbs
D. 2000 lbs
3. What is the purpose of the Multi-place Liferaft (MPLR) weak link?
A. Ensures safe deployment of liferafts when dropped to survivors
B. Anchors the MPLR in shallow water
C. Secures the raft to the aircraft
D. Detects water salinity before inflation
4. Where should the weak link be stored when not in use?
A. Under the raft inflation panel
, B. Inside the cable grip pocket
C. Next to the rescue hook
D. With the raft inflation hose
5. What is the correct finished length of the weak link?
A. 2 inches ± ½ inch
B. 3 inches ± ½ inch
C. 4 inches exactly
D. 3.5 inches ± 1 inch
6. How many Double Rescue Hooks are typically available in a standard aircraft
hoist system?
A. Two
B. One
C. Three
D. Four
7. What is the primary function of the Double Rescue Hook?
A. Secure winch cable
B. Connect personnel/equipment to the hoist
C. Unlock the quick splice
D. Attach the raft to the floor
8. What is the load rating of the large spring-loaded gate on the Double Rescue
Hook?
A. 3000 lbs
B. 2500 lbs
C. 2000 lbs
D. 1000 lbs
,9. What is the load capacity of the small spring-loaded gate?
A. 750 lbs
B. 1000 lbs
C. 1500 lbs
D. 3000 lbs
10. What is the load limit of the bottom ring of the Double Rescue Hook?
A. 1000 lbs
B. 1500 lbs
C. 2000 lbs
D. 3000 lbs
11. What is the function of the Hoist Quick Splice?
A. Shorten the hoist cable
B. Serve as a backup in case of cable failure
C. Automatically deploy the MPLR
D. Secure the cockpit door during rescue
12. What are the load test parameters for the Hoist Quick Splice?
A. 1000 lbs ± 100 lbs for 10 minutes
B. 1500 lbs for 5 minutes
C. 800 lbs for 15 minutes
D. 2000 lbs for 2 minutes
13. True or False:
Cable Splice is an approved alternate to the Hoist Quick Splice.
True
, 14. What is applied to the Cable Splice shackle pin to ensure tamper evidence?
A. Tamper dot
B. Cable tie
C. Safety seal
D. Tape marker
15. How many clicks must be heard to confirm the self-locking feature on the
Shackle Pin is engaged?
A. One
B. Two
C. Three
D. Four
16. What type of locking mechanism is used on the Shackle Pin in the cable
splice?
A. Spring tension pin
B. Self-locking mechanism
C. Twist-and-lock gate
D. Carabiner-style clip
17. What action should be taken immediately after using the Hoist Quick Splice
during a rescue?
A. Report the incident and document the use
B. Retighten the splice for reuse
C. Continue using the same setup for the next lift
D. Disconnect the MPLR immediately
18. What is the maximum load rating of a certified rescue hoist cable used in
military helicopters (standard)?
