View metadata, citation and similar papers at core.ac.uk brought to you by CORE
provided by ethesis@ni
Design of a Boost Converter
Submitted by
Abdul Fathah (109EE0612)
Department of Electrical Engineering
National Institute of Technology Rourkela
-1-
, Design of a Boost Converter
A Thesis submitted in partial accomplishment for the degree of
Bachelor of Technology in “Electrical Engineering”
By
Abdul Fathah (109EE0612)
Under guidance of
Prof. B.D. Subudhi
Department of Electrical Engineering
National Institute of Technology
Rourkela-769008 (ODISHA)
June-2013
-2-
, DEPARTMENT OF ELECTRICAL ENGINEERING
NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELA
ODISHA, INDIA-769008
CERTIFICATE
This is to certify that the thesis entitled “Design of a Boost Converter”, submitted by Abdul
Fathah (Roll. No. 109EE0612), in partial fulfillment for the award of Bachelor of Technology
in “Electrical Engineering” during session 2012-2013 at National Institute of Technology,
Rourkela. An authentic record of research work carried out by him under my supervision and
guidance.
The student has fulfilled all the recommended requirements.
The Thesis is based on candidate’s own work, has not submitted elsewhere for a degree/diploma.
In my opinion, this thesis is of standard required for the award of a bachelor of technology
degree in Electrical Engineering.
Place: Rourkela
Dept. of Electrical Engineering Prof. B.D. Subudhi
National institute of Technology Project Supervisor
Rourkela-769008
-3-
, ACKNOWLEDGEMENTS
On the submission of my thesis entitled “Design of a Boost Converter”, as a final year
project, I would like to extend my appreciation & my sincere thanks to my project supervisor, a
very generous guide in fact, Prof. B.D. Subudhi, Department of Electrical Engineering for his
ceaseless encouragement and support during the course of my work. I verily appreciate and value
his prestigious guidance and motivation from the beginning to the end of this work. His
knowledge and support at the time of crisis will be remembered lifelong. He has been great
source of inspiration to me and I thank him from the bottom of our hearts.
I would also like to thank the staff of Electrical engineering department for constant
support and providing place to work during project period. Last but not the least I would also like
thank my friends, specially Soumya Ranjan Panda and Subhransu Satpathy who was with
me during thick and thin.
Abdul Fathah
B. Tech (Electrical Engineering)
a
provided by ethesis@ni
Design of a Boost Converter
Submitted by
Abdul Fathah (109EE0612)
Department of Electrical Engineering
National Institute of Technology Rourkela
-1-
, Design of a Boost Converter
A Thesis submitted in partial accomplishment for the degree of
Bachelor of Technology in “Electrical Engineering”
By
Abdul Fathah (109EE0612)
Under guidance of
Prof. B.D. Subudhi
Department of Electrical Engineering
National Institute of Technology
Rourkela-769008 (ODISHA)
June-2013
-2-
, DEPARTMENT OF ELECTRICAL ENGINEERING
NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELA
ODISHA, INDIA-769008
CERTIFICATE
This is to certify that the thesis entitled “Design of a Boost Converter”, submitted by Abdul
Fathah (Roll. No. 109EE0612), in partial fulfillment for the award of Bachelor of Technology
in “Electrical Engineering” during session 2012-2013 at National Institute of Technology,
Rourkela. An authentic record of research work carried out by him under my supervision and
guidance.
The student has fulfilled all the recommended requirements.
The Thesis is based on candidate’s own work, has not submitted elsewhere for a degree/diploma.
In my opinion, this thesis is of standard required for the award of a bachelor of technology
degree in Electrical Engineering.
Place: Rourkela
Dept. of Electrical Engineering Prof. B.D. Subudhi
National institute of Technology Project Supervisor
Rourkela-769008
-3-
, ACKNOWLEDGEMENTS
On the submission of my thesis entitled “Design of a Boost Converter”, as a final year
project, I would like to extend my appreciation & my sincere thanks to my project supervisor, a
very generous guide in fact, Prof. B.D. Subudhi, Department of Electrical Engineering for his
ceaseless encouragement and support during the course of my work. I verily appreciate and value
his prestigious guidance and motivation from the beginning to the end of this work. His
knowledge and support at the time of crisis will be remembered lifelong. He has been great
source of inspiration to me and I thank him from the bottom of our hearts.
I would also like to thank the staff of Electrical engineering department for constant
support and providing place to work during project period. Last but not the least I would also like
thank my friends, specially Soumya Ranjan Panda and Subhransu Satpathy who was with
me during thick and thin.
Abdul Fathah
B. Tech (Electrical Engineering)
a
