1|Page | © copyright 2024/2025 | Grade A+
API 570 Questions and Answers
(Rated 100%)
Code to follow when performing an internal inspection on pipe
✓ "API 510"
Positive material identification (PMI)
✓ "API 578"
Fitness for service
✓ "API 579"
Risked based inspection (RBI)
✓ "API 580"
Valve inspection and testing
✓ "API 598"
Cathodic protection
✓ "API 651"
Master01 | October, 2024/2025 | Latest update
, 1|Page | © copyright 2024/2025 | Grade A+
Welding on in-service equipment containing the flammables
✓ "API 2201"
NDE procedure guidelines
✓ "ASME SECTION V"
Design code for fabrication of piping relief devices
✓ "ASME SECTION 8"
Welder and weld procedure qualification
✓ "ASME section 9"
NDE personnel qualification
✓ "ASNT SNT-TC-1A"
API 570 scope
✓ "AIRR
AIRR
Master01 | October, 2024/2025 | Latest update
, 1|Page | © copyright 2024/2025 | Grade A+
✓ alteration, inspection, repair, rerate
API 570 repair organization
✓ "JOC - authorized jurisdiction, owner, contractor
API 570 Ai's employer
✓ "JUIC - jurisdication, user, insurance company, contractor
Determine corrosion rate for new service or change in service
✓ "SOPI - Same or similar service, Owners experience, Published data,
inspect in three months
Primary responsibilities of API 570 authorized inspector
✓ "TIE - testing inspection examination
Define alteration
✓ "Physical change"
Define repair
Master01 | October, 2024/2025 | Latest update
, 1|Page | © copyright 2024/2025 | Grade A+
✓ "Restore to suitable condition"
Define an imperfection that exceeds the acceptance criteria
✓ "Defect"
Define a discontinuity that may or may not exceed the acceptance criteria
✓ "Imperfection"
Risk based inspections primary factors
✓ "Probability and consequence"
NDE number of CML's to obtain thickness readings during inspection
✓ "Representative"
NDE-CML that must be measured during the thickness inspection
✓ "CML with the earliest renewal date"
PRD's- How inspection intervals are determined
✓ "Performance"
Master01 | October, 2024/2025 | Latest update
API 570 Questions and Answers
(Rated 100%)
Code to follow when performing an internal inspection on pipe
✓ "API 510"
Positive material identification (PMI)
✓ "API 578"
Fitness for service
✓ "API 579"
Risked based inspection (RBI)
✓ "API 580"
Valve inspection and testing
✓ "API 598"
Cathodic protection
✓ "API 651"
Master01 | October, 2024/2025 | Latest update
, 1|Page | © copyright 2024/2025 | Grade A+
Welding on in-service equipment containing the flammables
✓ "API 2201"
NDE procedure guidelines
✓ "ASME SECTION V"
Design code for fabrication of piping relief devices
✓ "ASME SECTION 8"
Welder and weld procedure qualification
✓ "ASME section 9"
NDE personnel qualification
✓ "ASNT SNT-TC-1A"
API 570 scope
✓ "AIRR
AIRR
Master01 | October, 2024/2025 | Latest update
, 1|Page | © copyright 2024/2025 | Grade A+
✓ alteration, inspection, repair, rerate
API 570 repair organization
✓ "JOC - authorized jurisdiction, owner, contractor
API 570 Ai's employer
✓ "JUIC - jurisdication, user, insurance company, contractor
Determine corrosion rate for new service or change in service
✓ "SOPI - Same or similar service, Owners experience, Published data,
inspect in three months
Primary responsibilities of API 570 authorized inspector
✓ "TIE - testing inspection examination
Define alteration
✓ "Physical change"
Define repair
Master01 | October, 2024/2025 | Latest update
, 1|Page | © copyright 2024/2025 | Grade A+
✓ "Restore to suitable condition"
Define an imperfection that exceeds the acceptance criteria
✓ "Defect"
Define a discontinuity that may or may not exceed the acceptance criteria
✓ "Imperfection"
Risk based inspections primary factors
✓ "Probability and consequence"
NDE number of CML's to obtain thickness readings during inspection
✓ "Representative"
NDE-CML that must be measured during the thickness inspection
✓ "CML with the earliest renewal date"
PRD's- How inspection intervals are determined
✓ "Performance"
Master01 | October, 2024/2025 | Latest update
