ASBESTOS CONTRACTOR/SUPERVISOR
EXAM 2025 QUESTIONS AND ANSWERS
Fibers - ANS Asbestos is a generic name for a group of minerals that form __________
Hood, booties, coveralls - ANS The following are parts of a protective clothing ensemble
Removal of 5 feet of pipe insulation in order to fix a leak in the pipe - ANS Which of the
following operations would be considered to be an OSHA Class II job?
Holes cut in the polyethylene next to the machines - ANS Make-up air for a negative pressure
enclosure usually comes from
Sealed, labeled containers or wraps - ANS All asbestos waste must be
Inhalation - ANS Asbestos enters the body via
Guard rails - ANS Free standing mobile scaffolding that is 16 feet high are required to have
LOCKABLE WHEELS, NOT TO BE LESS THAN 4 FEET WIDE, BE INSPECTED BY A COMPETENT
PERSON, and must have what?
The removal of all specified asbestos-containing materials - ANS A final visual inspection is
used to determine which one of the final steps of an abatement project?
1 Copyright ©2025 BRAINBARTER ALL RIGHTS RESERVED
, 50-90 times - ANS How much greater is the incidence of lung cancer in asbestos workers who
smoke than in non-asbestos workers who do not smoke?
Personal air monitoring - ANS Which of the following records must be kept for a minimum of
30 years?
Any job where the amount of friable ACM being removed is less than 260 linear feet or 160
square feet - ANS AHERA regulations allow PCM to be used as a method of analysis for:
Visible emissions - ANS When removing asbestos-containing materials, which of the
following is most difficult to control?
OSHA - ANS What federal agency regulates asbestos in the manufacturing sector through
29CFR 1910.1001 and in the construction industry through 29 CFR 1926.1101?
2 layers of 4 mil on the walls and 2 layers of 6 mil on the floors - ANS When constructing a
negative pressure containment for abatement, common practice is to place polyethylene
sheeting on the walls and floors consisting of
HEPA vacuuming protective clothing before leaving the work area - ANS The following
personal hygiene practice could reduce the chances of asbestos exposure
On an annual basis - ANS The medical surveillance program is in a written document
designed to assess and monitor workers' health and fitness prior to employment and
____________
Towards the decontamination area - ANS When conducting detail cleaning of asbestos-
containing materials using scrubbers, the work should proceed
2 Copyright ©2025 BRAINBARTER ALL RIGHTS RESERVED
EXAM 2025 QUESTIONS AND ANSWERS
Fibers - ANS Asbestos is a generic name for a group of minerals that form __________
Hood, booties, coveralls - ANS The following are parts of a protective clothing ensemble
Removal of 5 feet of pipe insulation in order to fix a leak in the pipe - ANS Which of the
following operations would be considered to be an OSHA Class II job?
Holes cut in the polyethylene next to the machines - ANS Make-up air for a negative pressure
enclosure usually comes from
Sealed, labeled containers or wraps - ANS All asbestos waste must be
Inhalation - ANS Asbestos enters the body via
Guard rails - ANS Free standing mobile scaffolding that is 16 feet high are required to have
LOCKABLE WHEELS, NOT TO BE LESS THAN 4 FEET WIDE, BE INSPECTED BY A COMPETENT
PERSON, and must have what?
The removal of all specified asbestos-containing materials - ANS A final visual inspection is
used to determine which one of the final steps of an abatement project?
1 Copyright ©2025 BRAINBARTER ALL RIGHTS RESERVED
, 50-90 times - ANS How much greater is the incidence of lung cancer in asbestos workers who
smoke than in non-asbestos workers who do not smoke?
Personal air monitoring - ANS Which of the following records must be kept for a minimum of
30 years?
Any job where the amount of friable ACM being removed is less than 260 linear feet or 160
square feet - ANS AHERA regulations allow PCM to be used as a method of analysis for:
Visible emissions - ANS When removing asbestos-containing materials, which of the
following is most difficult to control?
OSHA - ANS What federal agency regulates asbestos in the manufacturing sector through
29CFR 1910.1001 and in the construction industry through 29 CFR 1926.1101?
2 layers of 4 mil on the walls and 2 layers of 6 mil on the floors - ANS When constructing a
negative pressure containment for abatement, common practice is to place polyethylene
sheeting on the walls and floors consisting of
HEPA vacuuming protective clothing before leaving the work area - ANS The following
personal hygiene practice could reduce the chances of asbestos exposure
On an annual basis - ANS The medical surveillance program is in a written document
designed to assess and monitor workers' health and fitness prior to employment and
____________
Towards the decontamination area - ANS When conducting detail cleaning of asbestos-
containing materials using scrubbers, the work should proceed
2 Copyright ©2025 BRAINBARTER ALL RIGHTS RESERVED
