NCCCO TELESCOPIC BOOM CRANE-
SWING CAB(TLL) EXAM WITH
CORRECT QUESTIONS AND ANSWERS
2025
A crane is operating with a long boom, on outriggers, on uneven ground. Under
these conditions it is important to - CORRECT-ANSWERS>>>>>Block under the
float or pad to achieve a 90 degree angle between the cylinder rod and the float
or pad
What is the purpose of a boom length indicator? - CORRECT-
ANSWERS>>>>>Indicates the extended length of boom
According to OSHA 1926 subpart cc, floats/pads must be fastened to the
outrigger/stabilizers when - CORRECT-ANSWERS>>>>>They are in use
A crane's jib is offset 15 degrees versus it's original 0 degree offset and the
boom angle remains unchanged, the load radius will - CORRECT-
ANSWERS>>>>>Increase
When leaving telescopic boom cranes unattended overnight or for longer
periods, the boom should be - CORRECT-ANSWERS>>>>>Fully retracted and
stowed
SWING CAB(TLL) EXAM WITH
CORRECT QUESTIONS AND ANSWERS
2025
A crane is operating with a long boom, on outriggers, on uneven ground. Under
these conditions it is important to - CORRECT-ANSWERS>>>>>Block under the
float or pad to achieve a 90 degree angle between the cylinder rod and the float
or pad
What is the purpose of a boom length indicator? - CORRECT-
ANSWERS>>>>>Indicates the extended length of boom
According to OSHA 1926 subpart cc, floats/pads must be fastened to the
outrigger/stabilizers when - CORRECT-ANSWERS>>>>>They are in use
A crane's jib is offset 15 degrees versus it's original 0 degree offset and the
boom angle remains unchanged, the load radius will - CORRECT-
ANSWERS>>>>>Increase
When leaving telescopic boom cranes unattended overnight or for longer
periods, the boom should be - CORRECT-ANSWERS>>>>>Fully retracted and
stowed