NRA Basic Pistol Shooting FINAL EXAM STUDY GUIDE 2025/2026 COMPLETE QUESTIONS BANK AND CORRECT DETAILED ANSWERS WITH RATIONALES || 100% GUARANTEED PASS LATEST VERSION

NRA Basic Pistol Shooting FINAL EXAM STUDY GUIDE 2025/2026 COMPLETE QUESTIONS BANK AND CORRECT DETAILED ANSWERS WITH RATIONALES || 100% GUARANTEED PASS LATEST VERSION 1. Four Fundamentals of Shooting a Pistol- ANSWER 1.) Grip 2.) Trigger control 3.) Sight allignment/Sight Picture 4.) Stance 2. Which of the following are the three major components of a pistol? A. Trigger, slide, and chamber B. Barrel, grip, and hammer C. Frame, barrel, and action D. Slide, sights, and recoil spring Correct Answer: C. Frame, barrel, and action Rationale: These are the primary structural and functional components necessary for a pistol to operate. 3. Which rule is NOT one of the NRA’s three fundamental rules for safe gun handling? A. Always keep the gun pointed in a safe direction B. Always keep your finger off the trigger until ready to shoot C. Always keep the action closed when not using the firearm D. Always keep the gun unloaded until ready to use Correct Answer: C. Always keep the action closed when not using the firearm Rationale: This is not one of the NRA’s three core rules. The actual rules involve safe direction, trigger discipline, and keeping the gun unloaded until use. 4. Which of the following is considered a stable shooting position? A. Standing with crossed legs B. Isosceles stance C. Hunched shoulder position D. Leaning against a wall Correct Answer: B. Isosceles stance Rationale: The isosceles stance provides stability and is recommended for beginners. 5. What should you do if your pistol does not fire when the trigger is pulled? A. Immediately dismantle the firearm B. Drop the gun and back away C. Keep the gun pointed in a safe direction and wait 30 seconds D. Pull the trigger again quickly Correct Answer: C. Keep the gun pointed in a safe direction and wait 30 seconds Rationale: This is proper protocol in case of a misfire or hangfire. 6. What is a malfunction known as a "stovepipe"? A. When the slide jams fully open B. When a casing gets caught vertically in the ejection port C. When bullets feed in the wrong direction D. When no cartridge enters the chamber Correct Answer: B. When a casing gets caught vertically in the ejection port Rationale: This is a common failure to eject malfunction. 7. What are the four components of a pistol cartridge? A. Primer, shell, grip, lead B. Bullet, case, primer, powder C. Shell, powder, cap, case D. Bullet, clip, primer, shell Correct Answer: B. Bullet, case, primer, powder Rationale: These parts work together to ignite and fire the round. 8. What is the difference between centerfire and rimfire ammunition? A. Rimfire has a thicker casing B. Centerfire has a primer in the center of the base; rimfire has primer in the rim C. Rimfire is used for high-caliber pistols only D. There is no functional difference Correct Answer: B. Centerfire has a primer in the center of the base; rimfire has primer in the rim Rationale: This difference affects ignition method and firearm compatibility. 9. What factor is MOST important when selecting a pistol for personal use? A. Color B. Popularity C. Fit and comfort in the shooter’s hand D. Cost Correct Answer: C. Fit and comfort in the shooter’s hand Rationale: A well-fitted pistol ensures better handling, control, and safety. 10. Why should you clean your pistol regularly? A. To increase resale value B. To make it look shiny C. To ensure safe and reliable operation D. To avoid warranty issues Correct Answer: C. To ensure safe and reliable operation Rationale: Dirt and residue can cause malfunctions and wear down internal parts. 11. Which of the following is NOT a component of a basic gun cleaning kit? A. Bore brush B. Gun oil C. Toothpaste D. Cleaning rod Correct Answer: C. Toothpaste Rationale: While abrasive, toothpaste is not designed for firearm use and can damage parts.