AMT1 SWE QUESTIONS (QUIZBANK) ANSWERED CORRECTLY TO PASS!!
A tire has markings 46x17R20. What does the R stand for? - (ANSWER)Radial
A tire marked 20x6.6-10. What is the tire cross section width? - (ANSWER)6.6 inches
A&P Manual Airframe V2 pg. 13-77
A salvage report shall be submitted to CG-41 within how many days? - (ANSWER)30 days
What is the ATA chapter for Air Conditioning? - (ANSWER)Chapter 21
A helicopter tail rotor offsets what force? - (ANSWER)Translating Tendency
What level mishap requires toxicology? - (ANSWER)class A & B
What are the tabs on the CGBI home page? - (ANSWER)Enterprise, Unit, Personal, Cubes/Reports
What ATA Chapter is Fire Protection? - (ANSWER)Chapter 26
What ATA Chapter is Powerplant? - (ANSWER)Chapter 71
What ATA Chapter is Fuel? - (ANSWER)Chapter 28
How is a monel rivet Identified? - (ANSWER)2 raised teets or 2 dimples
Damage repairable by stop drilling is classified as? - (ANSWER)Negligible
NAVAIR 01-1A-1 pg. 2-3
,AMT1 SWE QUESTIONS (QUIZBANK) ANSWERED CORRECTLY TO PASS!!
Who designates Collateral QA's? - (ANSWER)Engineering Officer
Aircraft washrack water should be between what temperature range? - (ANSWER)120-140
A fuel leak consisting of 4 drops per minute on an external fuel tank is classified as a? - (ANSWER)Class C
Heavy Seep NAVAIR 1-1A35
After a mishap, a member must be screened within how many hours? - (ANSWER)2 hours CIM 5100.47
pg3-40
After a mishap requiring a Mishap Board, members must do a pre-mishap screening of how many
hours? - (ANSWER)72 hour pre mishap history worksheet 5100.47 pg3-41
After how many hours of signal outage, should paper log books be used? - (ANSWER)4 hours PG-110
pg5-9
What should be entered in EAL after receiving a part from a parts pending discrepancy? -
(ANSWER)Parts Received and Awaiting Installation PG-110 pg5-6
What is the horizontal distance from from the reference datum to the center of gravity of an item? -
(ANSWER)Arm
Who is responsible for training members in JOAP sample usage? - (ANSWER)EO PG-110
How long are paper logbooks kept after entering into EAL? - (ANSWER)90 Days PG-110 pg5-10
What reference should be used for EAL Contingencies? - (ANSWER)MPC 00EAL.0 PG-110 pg5-10
,AMT1 SWE QUESTIONS (QUIZBANK) ANSWERED CORRECTLY TO PASS!!
The AFTO Form 103 will be initiated how many days in advance of the scheduled depot date to allow for
command review and certification? - (ANSWER)55 days AFTO 00-25-4
AFTO Form 103 shall be completed IAW what reference? - (ANSWER)AFTO 00-25-4
Who is responsible for Aircraft salvage and recovery? - (ANSWER)CO CIM-13020 pg10-1
During hover, a rotary aircraft has a tendency to drift. This drift is called what? - (ANSWER)Translating
Tendency
A near miss with no injury or aircraft damage is considered what class mishap? - (ANSWER)Class D
Aviation Mishap CIM-5100.47 pg3-7
What is a Near Miss defined as? - (ANSWER)withing 500 ft CIM-5100.47 pg3-7
How many days shall a CG-22 marked URGENT be issued to units? - (ANSWER)7 days
CGTO PG-85-00-20-A
When is a Form F not required to be given to a person on the ground? - (ANSWER)Loaded with the
standard load within 12 months or capable of recording w&b on crashworthy recorder CIM-3710.1 pg3-
2
If a crack goes beyond a stop drill repair, what increment should the drill be increased by? -
(ANSWER)1/16th of an inch.
NAVAIR 01-1A-1 Pg. 3-14
, AMT1 SWE QUESTIONS (QUIZBANK) ANSWERED CORRECTLY TO PASS!!
What are the types of structural damage classifications? - (ANSWER)Damage is generally classified as
negligible, repairable by patching, repairable by insertion, or requiring part replacement. (Patching
Insertion Replacement Negligible)
NAVAIR 01-1A-1 pg. 2-2
Who is responsible for printing flight manuals and checklists? - (ANSWER)CG-711
How long can a weekly be extended for an H65? - (ANSWER)1 day CIM-13020.1 pg5-9
What should be used to fir an O-ring on a sharply threaded component? - (ANSWER)Phenolic, brass
fitting, paper cover, petrolatum
Whom approves tool purchase from a commercial dealer? - (ANSWER)Supply Officer? CIM 4400.19 per
PG-110
Who is responsible for briefing pilots and flight crew before a test flight to ensure all parties are aware
of expectations? - (ANSWER)QA, Maintenance Release Authority CIM-13020.1 pg1-10
When storing a fuel container, it should not be stored near electrical components for risk of what? -
(ANSWER)
Who procures Aviation Survival Equipment? - (ANSWER)
When the unit develops a unit specific training program, it must be approved by whom? - (ANSWER)
Form ALC ESD-22 shall be completed for what aircraft? - (ANSWER)
A tire has markings 46x17R20. What does the R stand for? - (ANSWER)Radial
A tire marked 20x6.6-10. What is the tire cross section width? - (ANSWER)6.6 inches
A&P Manual Airframe V2 pg. 13-77
A salvage report shall be submitted to CG-41 within how many days? - (ANSWER)30 days
What is the ATA chapter for Air Conditioning? - (ANSWER)Chapter 21
A helicopter tail rotor offsets what force? - (ANSWER)Translating Tendency
What level mishap requires toxicology? - (ANSWER)class A & B
What are the tabs on the CGBI home page? - (ANSWER)Enterprise, Unit, Personal, Cubes/Reports
What ATA Chapter is Fire Protection? - (ANSWER)Chapter 26
What ATA Chapter is Powerplant? - (ANSWER)Chapter 71
What ATA Chapter is Fuel? - (ANSWER)Chapter 28
How is a monel rivet Identified? - (ANSWER)2 raised teets or 2 dimples
Damage repairable by stop drilling is classified as? - (ANSWER)Negligible
NAVAIR 01-1A-1 pg. 2-3
,AMT1 SWE QUESTIONS (QUIZBANK) ANSWERED CORRECTLY TO PASS!!
Who designates Collateral QA's? - (ANSWER)Engineering Officer
Aircraft washrack water should be between what temperature range? - (ANSWER)120-140
A fuel leak consisting of 4 drops per minute on an external fuel tank is classified as a? - (ANSWER)Class C
Heavy Seep NAVAIR 1-1A35
After a mishap, a member must be screened within how many hours? - (ANSWER)2 hours CIM 5100.47
pg3-40
After a mishap requiring a Mishap Board, members must do a pre-mishap screening of how many
hours? - (ANSWER)72 hour pre mishap history worksheet 5100.47 pg3-41
After how many hours of signal outage, should paper log books be used? - (ANSWER)4 hours PG-110
pg5-9
What should be entered in EAL after receiving a part from a parts pending discrepancy? -
(ANSWER)Parts Received and Awaiting Installation PG-110 pg5-6
What is the horizontal distance from from the reference datum to the center of gravity of an item? -
(ANSWER)Arm
Who is responsible for training members in JOAP sample usage? - (ANSWER)EO PG-110
How long are paper logbooks kept after entering into EAL? - (ANSWER)90 Days PG-110 pg5-10
What reference should be used for EAL Contingencies? - (ANSWER)MPC 00EAL.0 PG-110 pg5-10
,AMT1 SWE QUESTIONS (QUIZBANK) ANSWERED CORRECTLY TO PASS!!
The AFTO Form 103 will be initiated how many days in advance of the scheduled depot date to allow for
command review and certification? - (ANSWER)55 days AFTO 00-25-4
AFTO Form 103 shall be completed IAW what reference? - (ANSWER)AFTO 00-25-4
Who is responsible for Aircraft salvage and recovery? - (ANSWER)CO CIM-13020 pg10-1
During hover, a rotary aircraft has a tendency to drift. This drift is called what? - (ANSWER)Translating
Tendency
A near miss with no injury or aircraft damage is considered what class mishap? - (ANSWER)Class D
Aviation Mishap CIM-5100.47 pg3-7
What is a Near Miss defined as? - (ANSWER)withing 500 ft CIM-5100.47 pg3-7
How many days shall a CG-22 marked URGENT be issued to units? - (ANSWER)7 days
CGTO PG-85-00-20-A
When is a Form F not required to be given to a person on the ground? - (ANSWER)Loaded with the
standard load within 12 months or capable of recording w&b on crashworthy recorder CIM-3710.1 pg3-
2
If a crack goes beyond a stop drill repair, what increment should the drill be increased by? -
(ANSWER)1/16th of an inch.
NAVAIR 01-1A-1 Pg. 3-14
, AMT1 SWE QUESTIONS (QUIZBANK) ANSWERED CORRECTLY TO PASS!!
What are the types of structural damage classifications? - (ANSWER)Damage is generally classified as
negligible, repairable by patching, repairable by insertion, or requiring part replacement. (Patching
Insertion Replacement Negligible)
NAVAIR 01-1A-1 pg. 2-2
Who is responsible for printing flight manuals and checklists? - (ANSWER)CG-711
How long can a weekly be extended for an H65? - (ANSWER)1 day CIM-13020.1 pg5-9
What should be used to fir an O-ring on a sharply threaded component? - (ANSWER)Phenolic, brass
fitting, paper cover, petrolatum
Whom approves tool purchase from a commercial dealer? - (ANSWER)Supply Officer? CIM 4400.19 per
PG-110
Who is responsible for briefing pilots and flight crew before a test flight to ensure all parties are aware
of expectations? - (ANSWER)QA, Maintenance Release Authority CIM-13020.1 pg1-10
When storing a fuel container, it should not be stored near electrical components for risk of what? -
(ANSWER)
Who procures Aviation Survival Equipment? - (ANSWER)
When the unit develops a unit specific training program, it must be approved by whom? - (ANSWER)
Form ALC ESD-22 shall be completed for what aircraft? - (ANSWER)
