California Forklift Safety Instructor
Certification Practice Exam Questions
And Correct Answers (Verified Answers)
Plus Rationales 2025 Q&A | Instant
Download Pdf
1. What is the primary standard that governs forklift safety training
requirements in the United States?
A. OSHA 1910.147
B. ANSI B56.1
C. OSHA 1910.178
D. NFPA 70E
OSHA 1910.178 specifically outlines the safety requirements for powered
industrial trucks, including operator training.
2. How often must forklift operators be evaluated according to OSHA
standards?
A. Every year
B. Every 3 years
C. Every 3 years or when unsafe operation is observed
D. Only upon employment
,Operators must be reevaluated at least once every 3 years or sooner if
performance issues or workplace changes occur.
3. What is the minimum age required to legally operate a forklift?
A. 16
B. 18
C. 21
D. No age limit
Federal law prohibits anyone under 18 from operating a powered
industrial truck in non-agricultural employment.
4. Which of the following is a key responsibility of a forklift safety
instructor?
A. Conduct maintenance
B. Evaluate operator competence
C. Drive forklifts daily
D. Enforce company policy
Instructors must evaluate operator performance and provide training per
OSHA requirements.
5. When should a forklift be removed from service?
A. At the end of a shift
B. When it is unsafe to operate
C. Every Friday
D. After 100 hours of use
A forklift must be taken out of service immediately if it is found unsafe to
operate.
6. What is the most common cause of forklift-related fatalities?
, A. Tip-overs
B. Falling objects
C. Fires
D. Carbon monoxide
Tip-overs are the leading cause of fatalities involving forklifts due to
operator error or uneven terrain.
7. What must be completed before using a forklift each shift?
A. Fuel level check
B. Horn test
C. Pre-operation inspection
D. Supervisor approval
OSHA requires a forklift pre-operation inspection before every shift to
ensure safety.
8. What is the best action to take when the forklift’s view is obstructed?
A. Drive slowly
B. Use a spotter
C. Honk twice
D. Reverse
Using a spotter ensures better visibility and helps prevent collisions or
injuries.
9. Which document outlines the forklift’s weight capacity?
A. MSDS
B. Training record
C. Load capacity plate
D. Inspection log
Certification Practice Exam Questions
And Correct Answers (Verified Answers)
Plus Rationales 2025 Q&A | Instant
Download Pdf
1. What is the primary standard that governs forklift safety training
requirements in the United States?
A. OSHA 1910.147
B. ANSI B56.1
C. OSHA 1910.178
D. NFPA 70E
OSHA 1910.178 specifically outlines the safety requirements for powered
industrial trucks, including operator training.
2. How often must forklift operators be evaluated according to OSHA
standards?
A. Every year
B. Every 3 years
C. Every 3 years or when unsafe operation is observed
D. Only upon employment
,Operators must be reevaluated at least once every 3 years or sooner if
performance issues or workplace changes occur.
3. What is the minimum age required to legally operate a forklift?
A. 16
B. 18
C. 21
D. No age limit
Federal law prohibits anyone under 18 from operating a powered
industrial truck in non-agricultural employment.
4. Which of the following is a key responsibility of a forklift safety
instructor?
A. Conduct maintenance
B. Evaluate operator competence
C. Drive forklifts daily
D. Enforce company policy
Instructors must evaluate operator performance and provide training per
OSHA requirements.
5. When should a forklift be removed from service?
A. At the end of a shift
B. When it is unsafe to operate
C. Every Friday
D. After 100 hours of use
A forklift must be taken out of service immediately if it is found unsafe to
operate.
6. What is the most common cause of forklift-related fatalities?
, A. Tip-overs
B. Falling objects
C. Fires
D. Carbon monoxide
Tip-overs are the leading cause of fatalities involving forklifts due to
operator error or uneven terrain.
7. What must be completed before using a forklift each shift?
A. Fuel level check
B. Horn test
C. Pre-operation inspection
D. Supervisor approval
OSHA requires a forklift pre-operation inspection before every shift to
ensure safety.
8. What is the best action to take when the forklift’s view is obstructed?
A. Drive slowly
B. Use a spotter
C. Honk twice
D. Reverse
Using a spotter ensures better visibility and helps prevent collisions or
injuries.
9. Which document outlines the forklift’s weight capacity?
A. MSDS
B. Training record
C. Load capacity plate
D. Inspection log
