TPC 319 QUESTIONS WITH 100%
CORRECT ANS!!
position with
clips.
welding
wires
wooden braces
, • Megohmeter • Bench level
• tie wires • A wood block
Don't know?
2 of 25
Term
You can keep the fluid pressure in a line near a preset level with
a_________
valve.
• bypass
• regulating
• relief
• start-up
Give this one a try later!
hydraulic • Megohmeter
• regulating • Bench level
Don't know?
, 3 of 25
Term
To drill anchor bolt holes larger than 1^1/_2 in., you should use a
• Core bit with a diamond or carbon tip
• high-speed steel drill
• solid carbon-tipped bit
• tool steel drilli
Give this one a try later!
• cover it with mortar • neoprene tubing
• Core bit with a diamond or
• non-heat conductive top plate
carbon tip
Don't know?
4 of 25
Term
When moving equipment with a crowbar, what should you use
between the bar and the floor?
• A piece of pipe
• A thin steel plate
• A wad of waste material
• A wood block
CORRECT ANS!!
position with
clips.
welding
wires
wooden braces
, • Megohmeter • Bench level
• tie wires • A wood block
Don't know?
2 of 25
Term
You can keep the fluid pressure in a line near a preset level with
a_________
valve.
• bypass
• regulating
• relief
• start-up
Give this one a try later!
hydraulic • Megohmeter
• regulating • Bench level
Don't know?
, 3 of 25
Term
To drill anchor bolt holes larger than 1^1/_2 in., you should use a
• Core bit with a diamond or carbon tip
• high-speed steel drill
• solid carbon-tipped bit
• tool steel drilli
Give this one a try later!
• cover it with mortar • neoprene tubing
• Core bit with a diamond or
• non-heat conductive top plate
carbon tip
Don't know?
4 of 25
Term
When moving equipment with a crowbar, what should you use
between the bar and the floor?
• A piece of pipe
• A thin steel plate
• A wad of waste material
• A wood block
