C54 EXAM WITH CORRECT QUESTIONS
AND ANSWERS 2025
Absorbs more than 7% water. Not for wet areas or exterior use. - CORRECT-
ANSWERS******Nonvitreous Tile
Absorbs 3% to 7% water. Can be used in some interior wet areas if there is waterproofing. -
CORRECT-ANSWERS******Semi-Vitreous Tile
Absorbs .5% to 3% water and is used both inside and outside. - CORRECT-
ANSWERS******Vitreous Tile
Absorbs less .5% water and is used for sanitary installations. - CORRECT-
ANSWERS******Impervious Tile
Must not weight less than 2.5 pounds per square yard and metal lath must be lapped at least 2"
on all sides. - CORRECT-ANSWERS******Lath
, Used for high sulfate resistants. - CORRECT-ANSWERS******Type V Morter Mix
Increases bond strength and over the years will heal fine cracks such as those caused by
shrinkage. - CORRECT-ANSWERS******Lime
A cementing agent that increases water retention and plasticity of mortar. - CORRECT-
ANSWERS******Plasticiser
1:5:1/2 to 1:7:1 - CORRECT-ANSWERS******Mix Ratio for Wall/Ceilings
1:5 - CORRECT-ANSWERS******Mix Ratio for Floors
1:4* - CORRECT-ANSWERS******Mix Ratio for Showers
1:4* - CORRECT-ANSWERS******Mix Ratio for Roman Tub
1:5 - CORRECT-ANSWERS******Mix Ratio for Countertops
AND ANSWERS 2025
Absorbs more than 7% water. Not for wet areas or exterior use. - CORRECT-
ANSWERS******Nonvitreous Tile
Absorbs 3% to 7% water. Can be used in some interior wet areas if there is waterproofing. -
CORRECT-ANSWERS******Semi-Vitreous Tile
Absorbs .5% to 3% water and is used both inside and outside. - CORRECT-
ANSWERS******Vitreous Tile
Absorbs less .5% water and is used for sanitary installations. - CORRECT-
ANSWERS******Impervious Tile
Must not weight less than 2.5 pounds per square yard and metal lath must be lapped at least 2"
on all sides. - CORRECT-ANSWERS******Lath
, Used for high sulfate resistants. - CORRECT-ANSWERS******Type V Morter Mix
Increases bond strength and over the years will heal fine cracks such as those caused by
shrinkage. - CORRECT-ANSWERS******Lime
A cementing agent that increases water retention and plasticity of mortar. - CORRECT-
ANSWERS******Plasticiser
1:5:1/2 to 1:7:1 - CORRECT-ANSWERS******Mix Ratio for Wall/Ceilings
1:5 - CORRECT-ANSWERS******Mix Ratio for Floors
1:4* - CORRECT-ANSWERS******Mix Ratio for Showers
1:4* - CORRECT-ANSWERS******Mix Ratio for Roman Tub
1:5 - CORRECT-ANSWERS******Mix Ratio for Countertops