NYS METAL COILS ENDORSEMENT EXAM
QUESTIONS |GUARANTEED ACCURATE
ANSWERS |LATEST VERSION 2025\26
Term 1 of
18
What are the requirements for securing metal coils with eyes lengthwise?
(Option #1)
Give this one a try later!
,A. 3/8-G7 = 6,600 lbs.
B.7/16-G43 = 7,200 lbs.
1. Support the coil above the deck to prevent the coil from rolling.
2. Two indirect tiedowns are attached over the front and rear parts of the coil.
3.Use blocking or friction mats to prevent forward movement.
Same as Option #1, except the direct tiedowns are straight instead of diagonal.
1. Support the coil above the deck to prevent the coil from rolling.
2.Attach at least one direct tiedown on each diagonal through the eye of the
coil making an angle of not more than 45 degrees with the floor of vehicle when
viewed from the side.
3.Attach at least one indirect tiedown side-to-side over the top of the coil.
4. Use blocking or friction mats to prevent forward movement.
Don't know?
, Term
2 of 18
If an aluminum coil weighs 12,000 lbs., the load securement must provide 6,000
lbs. of securement to prevent movement in the rearward direction. How is this
performance criteria expressed in terms of gravity ("g")?
Give this one a try later!
0.5 g. 0.75 g.
0.25 g. 1.0 g.
Don't know?
QUESTIONS |GUARANTEED ACCURATE
ANSWERS |LATEST VERSION 2025\26
Term 1 of
18
What are the requirements for securing metal coils with eyes lengthwise?
(Option #1)
Give this one a try later!
,A. 3/8-G7 = 6,600 lbs.
B.7/16-G43 = 7,200 lbs.
1. Support the coil above the deck to prevent the coil from rolling.
2. Two indirect tiedowns are attached over the front and rear parts of the coil.
3.Use blocking or friction mats to prevent forward movement.
Same as Option #1, except the direct tiedowns are straight instead of diagonal.
1. Support the coil above the deck to prevent the coil from rolling.
2.Attach at least one direct tiedown on each diagonal through the eye of the
coil making an angle of not more than 45 degrees with the floor of vehicle when
viewed from the side.
3.Attach at least one indirect tiedown side-to-side over the top of the coil.
4. Use blocking or friction mats to prevent forward movement.
Don't know?
, Term
2 of 18
If an aluminum coil weighs 12,000 lbs., the load securement must provide 6,000
lbs. of securement to prevent movement in the rearward direction. How is this
performance criteria expressed in terms of gravity ("g")?
Give this one a try later!
0.5 g. 0.75 g.
0.25 g. 1.0 g.
Don't know?
