8/9/25, 9:56 AM Sample questions from all CSLB trade exams Flashcards | Quizlet
Sample questions from all CSLB trade exams
Save
Terms in this set (111)
When using a crane to lift The lifting lines should be as vertical as possible
a 12,000-gallon tank out of
the excavation, what is the
preferable position of the
rigging lines attached to
the tank's lifting eyes?
A. One lifting line should
be horizontal
B. The lifting lines should
be as far apart as
possibles
C. The lifting lines should
be as horizontal as
possible
D. The lifting lines should
be as vertical as possible
https://quizlet.com/1064706881/sample-questions-from-all-cslb-trade-exams-flash-cards/?new 1/39
,8/9/25, 9:56 AM Sample questions from all CSLB trade exams Flashcards | Quizlet
Which of the following Material that contains more than 1% asbestos
describes surfacing ACM?
A. Material that contains
more than 1% asbestos
B. Material that contains
more than 0.1% asbestos
C. Material that contains
more than 0.01% asbestos
D. Material that contains
more than 0.001%
asbestos
When removing asbestos Inform each of the employers about the asbestos
as a multi-employer work work being performed
site, the asbestos
abatement contractor
must do which of the
following?
A. Ensure that all other
employers leave the site
B. Inform the local
Cal/OSHA office within 48
hours
C. Ensure that all asbestos
is removed
D. Inform each of the
employers about the
asbestos work being
performed.
https://quizlet.com/1064706881/sample-questions-from-all-cslb-trade-exams-flash-cards/?new 2/39
,8/9/25, 9:56 AM Sample questions from all CSLB trade exams Flashcards | Quizlet
When must a contractor When airborne exposure exceeds the TWA and
provide and require the excursion limits
use of protective
clothing?
A. When Class II work
requires removal of ACM
exceeding 10 square feet
B. When airborne
exposure exceeds the
TWA and excursion limits
C. When Class II work
requires removal of TSI
exceeding 25 linear feet
D. When a negative
exposure assessment is
produced
Alternating current would Aluminum
most likely be used in
GTAW to weld which of
the following metals?
A. Low carbon steel
B. Deoxidized copper
C. Aluminum
D. Stainless steel
WHat is the minimum 1/8"
thickness of steel that is
covered by the AWS D1.1
Structural Steel welding
code?
A. 1/8"
B. 1/4"
C. 5/16"
D. 3/8"
https://quizlet.com/1064706881/sample-questions-from-all-cslb-trade-exams-flash-cards/?new 3/39
, 8/9/25, 9:56 AM Sample questions from all CSLB trade exams Flashcards | Quizlet
When welding with FCAW, Shorten the stickout
how can the operator
control excess spatter?
A. Change the drag angle
B. Run stringer beads.
C. Shorten the stickout
D. Lengthen the stickout
To read and properly Basic knowledge of chemistry and the measurements
interpret laboratory used
analysis reports as they
apply to hazardous sites, a
contractor should have
which of the following?
A. The phone number of a
contract a the lead
agency
B. Basic knowledge of
math
C. A contract at Cal/OSHA
D. Basic knowledge of
chemistry and the
measurements used
How much material will it 235.5 cubic feet
take to fill up three round
holes drilled into the
ground 25 feet deep and
2 feet in diameter?
A. 235.5 cubic feet
B. 180.5 cubic feet
C. 150.2 cubic feet
D. 100.7 cubic feet
https://quizlet.com/1064706881/sample-questions-from-all-cslb-trade-exams-flash-cards/?new 4/39
Sample questions from all CSLB trade exams
Save
Terms in this set (111)
When using a crane to lift The lifting lines should be as vertical as possible
a 12,000-gallon tank out of
the excavation, what is the
preferable position of the
rigging lines attached to
the tank's lifting eyes?
A. One lifting line should
be horizontal
B. The lifting lines should
be as far apart as
possibles
C. The lifting lines should
be as horizontal as
possible
D. The lifting lines should
be as vertical as possible
https://quizlet.com/1064706881/sample-questions-from-all-cslb-trade-exams-flash-cards/?new 1/39
,8/9/25, 9:56 AM Sample questions from all CSLB trade exams Flashcards | Quizlet
Which of the following Material that contains more than 1% asbestos
describes surfacing ACM?
A. Material that contains
more than 1% asbestos
B. Material that contains
more than 0.1% asbestos
C. Material that contains
more than 0.01% asbestos
D. Material that contains
more than 0.001%
asbestos
When removing asbestos Inform each of the employers about the asbestos
as a multi-employer work work being performed
site, the asbestos
abatement contractor
must do which of the
following?
A. Ensure that all other
employers leave the site
B. Inform the local
Cal/OSHA office within 48
hours
C. Ensure that all asbestos
is removed
D. Inform each of the
employers about the
asbestos work being
performed.
https://quizlet.com/1064706881/sample-questions-from-all-cslb-trade-exams-flash-cards/?new 2/39
,8/9/25, 9:56 AM Sample questions from all CSLB trade exams Flashcards | Quizlet
When must a contractor When airborne exposure exceeds the TWA and
provide and require the excursion limits
use of protective
clothing?
A. When Class II work
requires removal of ACM
exceeding 10 square feet
B. When airborne
exposure exceeds the
TWA and excursion limits
C. When Class II work
requires removal of TSI
exceeding 25 linear feet
D. When a negative
exposure assessment is
produced
Alternating current would Aluminum
most likely be used in
GTAW to weld which of
the following metals?
A. Low carbon steel
B. Deoxidized copper
C. Aluminum
D. Stainless steel
WHat is the minimum 1/8"
thickness of steel that is
covered by the AWS D1.1
Structural Steel welding
code?
A. 1/8"
B. 1/4"
C. 5/16"
D. 3/8"
https://quizlet.com/1064706881/sample-questions-from-all-cslb-trade-exams-flash-cards/?new 3/39
, 8/9/25, 9:56 AM Sample questions from all CSLB trade exams Flashcards | Quizlet
When welding with FCAW, Shorten the stickout
how can the operator
control excess spatter?
A. Change the drag angle
B. Run stringer beads.
C. Shorten the stickout
D. Lengthen the stickout
To read and properly Basic knowledge of chemistry and the measurements
interpret laboratory used
analysis reports as they
apply to hazardous sites, a
contractor should have
which of the following?
A. The phone number of a
contract a the lead
agency
B. Basic knowledge of
math
C. A contract at Cal/OSHA
D. Basic knowledge of
chemistry and the
measurements used
How much material will it 235.5 cubic feet
take to fill up three round
holes drilled into the
ground 25 feet deep and
2 feet in diameter?
A. 235.5 cubic feet
B. 180.5 cubic feet
C. 150.2 cubic feet
D. 100.7 cubic feet
https://quizlet.com/1064706881/sample-questions-from-all-cslb-trade-exams-flash-cards/?new 4/39
