8/13/25, 2:46
PM
RCO FINAL EXAM QUESTIONS AND ANSWERS
WITH COMPLETE SOLUTIONS VERIFIED
LATEST UPDATE GRADED A++ 2025/2026
GUARANTEED PASS
Terms in this set (107)
what brake application emergency brake application
will occur if the OCU is
tilted and allowed to
time out?
when the secondary both operators but secondary must recover first
operator places the
OCU into emergency,
who must perform the
recovery procedure?
when are remote control when the remote control operator controlling
movements NOT the movement is riding the leading locomotive
considered shoving in the direction of movement
movements?
1. place the speed selector to stop
list the steps for 2. move independent brake override to emergency
recovering an emergency 3. move independent brake
brake application: override to release SMR
1/
16
,8/13/25, 2:46
PM
what speed must not 4 mph until the crossing has been occupied
be exceeded when
using cameras to
protect a road
crossing? when may
speed be resumed?
1. move speed selector to stop
list the steps for 2. move the independent brake override selector to full
recovering full service 3. move the independent brake
brake application: override selector to release SMR
what is the first OCU the tilt feature
feature the operator
tests when initially
setting up a unit for
remote operation?
what could cause a tilting the OCU greater than 45 degrees
clicking sound followed
by a steady tone
alarm?
which OCU component the independent brake override
will allow the RCO to
send an emergency
stop command to the
RCL?
The RCO begins press a vigilance button
hearing a steady
clicking sound from
the OCU after
remaining in
2/
16
, 8/13/25, 2:46
PM
7mph for 50 seconds.
How should the RCO
respond?
What is the preferred ramping the speed selector or using the coast feature
method of slowing or to minimize train forces
stopping the
movement?
If the primary OCU fails, re link as a single RCO
what would the other
operator need to do
in order to continue
working?
How does the primary press the PCC/ LNK button
RCO initiate a pitch
after completing a
job briefing?
how many seconds 10 seconds
does the secondary
RCO have to accept
the pitch?
If the primary RCO do not push the PCC to confirm the pitch and move any
sends a pitch in error, other button
how could the
primary RCO prevent
control from being
transferred?
what must the RCO do move the speed selector to the stop position prior to
to avoid "shock making the coupling
loading"? ( making a
3/
16
PM
RCO FINAL EXAM QUESTIONS AND ANSWERS
WITH COMPLETE SOLUTIONS VERIFIED
LATEST UPDATE GRADED A++ 2025/2026
GUARANTEED PASS
Terms in this set (107)
what brake application emergency brake application
will occur if the OCU is
tilted and allowed to
time out?
when the secondary both operators but secondary must recover first
operator places the
OCU into emergency,
who must perform the
recovery procedure?
when are remote control when the remote control operator controlling
movements NOT the movement is riding the leading locomotive
considered shoving in the direction of movement
movements?
1. place the speed selector to stop
list the steps for 2. move independent brake override to emergency
recovering an emergency 3. move independent brake
brake application: override to release SMR
1/
16
,8/13/25, 2:46
PM
what speed must not 4 mph until the crossing has been occupied
be exceeded when
using cameras to
protect a road
crossing? when may
speed be resumed?
1. move speed selector to stop
list the steps for 2. move the independent brake override selector to full
recovering full service 3. move the independent brake
brake application: override selector to release SMR
what is the first OCU the tilt feature
feature the operator
tests when initially
setting up a unit for
remote operation?
what could cause a tilting the OCU greater than 45 degrees
clicking sound followed
by a steady tone
alarm?
which OCU component the independent brake override
will allow the RCO to
send an emergency
stop command to the
RCL?
The RCO begins press a vigilance button
hearing a steady
clicking sound from
the OCU after
remaining in
2/
16
, 8/13/25, 2:46
PM
7mph for 50 seconds.
How should the RCO
respond?
What is the preferred ramping the speed selector or using the coast feature
method of slowing or to minimize train forces
stopping the
movement?
If the primary OCU fails, re link as a single RCO
what would the other
operator need to do
in order to continue
working?
How does the primary press the PCC/ LNK button
RCO initiate a pitch
after completing a
job briefing?
how many seconds 10 seconds
does the secondary
RCO have to accept
the pitch?
If the primary RCO do not push the PCC to confirm the pitch and move any
sends a pitch in error, other button
how could the
primary RCO prevent
control from being
transferred?
what must the RCO do move the speed selector to the stop position prior to
to avoid "shock making the coupling
loading"? ( making a
3/
16
